|
| | | | | |
| IC型号 | 厂商 | PDF资料下载 | 供应商 | 说明 |
| ADCMP565 | ADI | | 查找供应商 |
- 300 ps Propagation Delay Input to Output
- 50 ps Propagation Delay Dispersion
- Differential ECL Compatible Outputs
- Differential Latch Control
- Robust Input Protection
- Input Common-mode Range:
-2.0 V to +3.0 V
- Input Differential Range ±5 V
|
- Power Supply Sensitivity Rejection
Greater than 65 dB
- 200 ps Minimum Pulsewidth
- 5 GHz Equivalent Input Rise
Time Bandwidth
- Typical Output Rise/Fall of 160 ps
- SPT 9689 Replacement
| |
| CMP402 | ADI | | 查找供应商 |
- 23 ns or 65 ns Propagation Delay
- Single-Supply Operation
- Compatible with 3 V and 5 V Logic
|
- Separate Input and Output Sections
- Low Power
- Wide Input Range: –5 V to +3.9 V
| |
| CMP401 | ADI | | 查找供应商 |
- 23 ns or 65 ns Propagation Delay
- Single-Supply Operation
- Compatible with 3 V and 5 V Logic
|
- Separate Input and Output Sections
- Low Power
- Wide Input Range: –5 V to +3.9 V
| |
| CMP04 | ADI | | 查找供应商 |
- High Gain: 200 V/mV Typ
- Single- or Dual-Supply Operation
- Input Voltage Range Includes Ground
- Low Power Consumption
(1.5 mW/Comparator)
- Low Input Bias Current: 100 nA Max
- Low Input Offset Current: 10 nA Max
|
- Low Offset Voltage: 1 mV Max
- Low Output Saturation Voltage:
250 mV @ 4 mA
- Logic Output Compatible with
TTL, DTL, ECL, MOS, and CMOS
- Directly Replaces
LM139/LM239/LM339 Comparators | |
| ADCMP670 | ADI | | 查找供应商 |
- 400 mV ± 1.5% threshold
- Supply range: 1.7 V to 5.5 V
- Low quiescent current: 6.5 μA typical
- Input range includes ground
- Internal hysteresis: 8.9 mV typical
- Low input bias current: ±10 nA maximum
|
- Open-drain outputs
- Supports wire-AND connections
- Input polarities: one inverting and one noninverting
- Low profile (1 mm) TSOT package
- Drop-in replacement for the LT6700-1
| |
| ADCMP609 | ADI | | 查找供应商 |
- 10 mV Sensitivity Rail to Rail at VCC = 2.5 V
- Input Common-mode Voltage from −0.2 V to VCC + 0.2 V
- Low Glitch CMOS-/TTL-compatible Output Stage
- 30 ns Propagation Delay
- 1 mW at 2.5 V
|
- Shutdown Pin
- Single-pin Control for Programmable Hysteresis and Latch
- Power Supply Rejection >60 dB
- −40 C° to +125 C° Operation
| |
| ADCMP608 | ADI | | 查找供应商 |
- 10 mV Sensitivity Rail to Rail at VCC = 2.5 V
- Input Common-mode Voltage from −0.2 V to VCC + 0.2 V
- Low Glitch CMOS-/TTL-compatible Output Stage
- 30 ns Propagation Delay
- 1 mW at 2.5 V
|
- Shutdown Pin
- Single-pin Control for Programmable Hysteresis and Latch
- Power Supply Rejection >60 dB
- −40 C° to +125 C° Operation
| |
| ADCMP607 | ADI | | 查找供应商 |
- 10 mV Sensitivity Rail to Rail at VCC = 2.5 V
- Input Common-mode Voltage from −0.2 V to VCC + 0.2 V
- CML-compatible Output Stage
- 1 ns Propagation Delay
- 50 mW at 2.5 V
|
- Shutdown Pin
- Single-pin Control for Programmable Hysteresis and Latch
- Power Supply Rejection > 60 dB
- −40°C to +125°C Operation
| |
| ADCMP606 | ADI | | 查找供应商 |
- 10 mV Sensitivity Rail to Rail at VCC = 2.5 V
- Input Common-mode Voltage from −0.2 V to VCC + 0.2 V
- CML-compatible Output Stage
- 1 ns Propagation Delay
|
- 50 mW at 2.5 V
- Power Supply Rejection > 60 dB
- −40°C to +125°C Operation
| |
| ADCMP605 | ADI | | 查找供应商 |
- Fully specified rail to rail at VCC = 2.5 V to 5.5 V
- Input Common-mode Voltage from −0.2 V to VCC + 0.2 V
- Low Glitch LVDS-compatible Output Stage
- 1.6 ns Propagation Delay
- 37 mW at 2.5 V
|
- Shutdown Pin
- Single-pin Control for Programmable Hysteresis and Latch
- Power Supply Rejection >60 dB
- −40°C to +125°C Operation
| |
