| 型号 |
简要描述 |
文件大小 |
厂家 |
下载 |
| 6N137 |
HCMOS Compatible, High CMR, 10 MBd Optocouplers |
261.65K |
HP [Agilent(Hewlett-Packard)] |
 |
| 6N137 |
High CMR Line Receiver Optocouplers |
261.65K |
HP [Agilent(Hewlett-Packard)] |
|
| 6N137 |
High CMR, High Speed TTL Compatible Optocouplers |
261.65K |
HP [Agilent(Hewlett-Packard)] |
|
| 6N137 |
HIGH CMR, VERY HIGH SPEED OPTICALLY COUPLED ISOLATOR LOGIC GATE OUTPUT |
261.65K |
ETC [ETC] |
|
| 6N137 |
HIGH SPEED COUPLER |
261.65K |
MARKTECH [Marktech Corporate] |
|
| 6N137 |
IRED & PHOTO IC (DEGITAL LOGIC ISOLATION, TELE-COMMUNICATION, ANALOG DATA EQUIPMENT CONTROL) |
261.65K |
TOSHIBA [Toshiba Semiconductor] |
|
| 6N137 |
HIGH SPEED-10 MBit/s LOGIC GATE OPTOCOUPLERS |
261.65K |
FAIRCHILD [Fairchild Semiconductor] |
|
| 6N137 |
HIGH SPEED-10 MBit/s LOGIC GATE OPTOCOUPLERS |
261.65K |
QT [QT Optoelectronics] |
|
| 6N137 |
HIGH SPEED-10 MBit/s LOGIC GATE OPTOCOUPLERS |
261.65K |
FAIRCHILD [Fairchild Semiconductor] |
|
| 6N137 |
Small Outline, 5 Lead, High CMR, High Speed, Logic Gate Optocouplers |
261.65K |
HP [Agilent(Hewlett-Packard)] |
|
| 6N137 |
Super High Speed Response OPIC Photocoupler |
261.65K |
SHARP [Sharp Electrionic Components] |
|
| 6N137 |
Logic Output Optoisolator 10MBd Open Collector, Schottky Clamped 3750Vrms 1 Channel 1kV/μs CMTI 8-DIP |
239K |
|
|
| 6N137 |
Logic Output Optoisolator 10MBd Open Collector, Schottky Clamped 3750Vrms 1 Channel 1kV/μs CMTI 8-DIP |
805K |
|
|
| 6N137 |
Logic Output Optoisolator 10MBd Open Collector, Schottky Clamped 3750Vrms 1 Channel 1kV/μs CMTI 8-DIP |
478K |
|
|
| 6N137 |
CAUTION: It is advised that normal static precautions be taken in handling and assembly of this component to
prevent damage and/or degradation which may be induced by ESD.
Description
The HCPL-2602/12 are optically coupled line receivers
that combine a GaAsP light emitting diode, an input
current regulator and an integrated high gain photo
detector. The input regulator serves as a line
termination for line receiver applications. It clamps
the line voltage and regulates the LED current so line
reflections do not interfere with circuit performance.
The regulator allows a typical LED current of 8.5 mA
before it starts to shunt excess current. The output
of the detector IC is an open collector Schottky clamped
transistor. An enable input gates the detector. The
internal detector shield provides a guaranteed
common mode transient immunity specification of
1000 V /ms for the 2602, and 3500 V /ms for the 2612.
DC specifications are defined similar to TTL logic.
The optocoupler ac and dc opera |
464.41K |
|
|
| 6N137 |
|
327.34K |
|
|
| 6N137 |
IRED & PHOTO IC (DEGITAL LOGIC ISOLATION, TELE-COMMUNICATION, ANALOG DATA EQUIPMENT CONTROL) |
327.56K |
TOSHIBA |
|
| 6N137 |
HIGH SPEED-10 MBit/s LOGIC GATE OPTOCOUPLERS |
174.66K |
QT |
|
| 6N137 |
Super High Speed Response OPIC Photocoupler |
70.01K |
SHARP |
|
| 6N137 |
High CMR, High Speed TTL Compatible Optocouplers |
256.85K |
AGILENT |
|
