function setnext_product(selvalue,formsel,formsel1){
 formsel1.length=0;formsel.length=0;
   switch(selvalue){ 
   case '': 
      break;
   case "2032":
   formsel.options[0]=new Option("逻辑IC","2033");
   formsel.options[1]=new Option("射频IC","2034");
   formsel.options[2]=new Option("时钟IC","2035");
   formsel.options[3]=new Option("其他IC","2036");
   formsel.options[4]=new Option("处理器MPU","2049");
      break;
   case "1372":
   formsel.options[0]=new Option("LDO","1405");
   formsel.options[1]=new Option("DC-AC","1406");
   formsel.options[2]=new Option("DC-DC","1407");
   formsel.options[3]=new Option("LED驱动IC","1408");
   formsel.options[4]=new Option("稳压IC","1409");
   formsel.options[5]=new Option("充电管理IC","1410");
   formsel.options[6]=new Option("其他电源IC","1411");
      break;
   case "1975":
   formsel.options[0]=new Option("ROM（只读存储器）","1976");
   formsel.options[1]=new Option("QTP（掩膜ROM）","1977");
   formsel.options[2]=new Option("OTP（一次可编程ROM）","1978");
   formsel.options[3]=new Option("NVROM(非易失随机存储器）","1979");
   formsel.options[4]=new Option("PROM（可编程ROM）","1980");
   formsel.options[5]=new Option("EPROM（紫外线可擦除可编程ROM）","1981");
   formsel.options[6]=new Option("EEPROM（电可擦除可编程ROM）","1982");
   formsel.options[7]=new Option("RAM（随机存取存储器）","1983");
   formsel.options[8]=new Option("双集型RAM","1984");
   formsel.options[9]=new Option("DRAM（MOS型动态存储器）","1985");
   formsel.options[10]=new Option("SRAM （MOS型静态存储器）","1986");
   formsel.options[11]=new Option("SDRAM（同步动态存储器）","1987");
   formsel.options[12]=new Option("Flash Memory（闪存/快闪存储器）","1988");
   formsel.options[13]=new Option("Nand flash","1989");
      break;
   case "284":
   formsel.options[0]=new Option("贴片/片式/SMD二极管","713");
   formsel.options[1]=new Option("整流二极管","286");
   formsel.options[2]=new Option("整流二极管模块","1252");
   formsel.options[3]=new Option("稳压二极管","290");
   formsel.options[4]=new Option("开关二极管","287");
   formsel.options[5]=new Option("桥堆/整流桥/桥式整流器","705");
   formsel.options[6]=new Option("硅粒子/硅堆/高压二极管","712");
   formsel.options[7]=new Option("检波二极管","706");
   formsel.options[8]=new Option("限幅二极管","1779");
   formsel.options[9]=new Option("调制二极管","1780");
   formsel.options[10]=new Option("混频二极管","1666");
   formsel.options[11]=new Option("阻尼二极管","1286");
   formsel.options[12]=new Option("变容二极管","294");
   formsel.options[13]=new Option("放大二极管","1781");
   formsel.options[14]=new Option("高频二极管","707");
   formsel.options[15]=new Option("恒流二极管","1241");
   formsel.options[16]=new Option("继流二极管","1782");
   formsel.options[17]=new Option("快/超快/特快恢复二极管","285");
   formsel.options[18]=new Option("瞬态(变)抑制二极管","708");
   formsel.options[19]=new Option("功率二极管","1783");
   formsel.options[20]=new Option("ESD静电二极管","1465");
   formsel.options[21]=new Option("触发二极管","293");
   formsel.options[22]=new Option("肖特基二极管","289");
   formsel.options[23]=new Option("发光二极管","1784");
   formsel.options[24]=new Option("激光(光电)二极管","292");
   formsel.options[25]=new Option("光敏二极管","1239");
   formsel.options[26]=new Option("色敏二极管","1283");
   formsel.options[27]=new Option("磁敏二极管","1284");
   formsel.options[28]=new Option("热敏二极管","1240");
   formsel.options[29]=new Option("齐纳/雪崩二极管","709");
   formsel.options[30]=new Option("微波二极管","710");
   formsel.options[31]=new Option("红外发射二极管","711");
   formsel.options[32]=new Option("江崎二极管","1786");
   formsel.options[33]=new Option("双基极二极管","1787");
   formsel.options[34]=new Option("旋转二极管","1788");
   formsel.options[35]=new Option("频率倍增二极管","1789");
   formsel.options[36]=new Option("光纤耦合二极管","1790");
   formsel.options[37]=new Option("PIN二极管","1791");
   formsel.options[38]=new Option("TVP管","1792");
   formsel.options[39]=new Option("二极管芯片(管芯)","892");
   formsel.options[40]=new Option("其他二极管","295");
      break;
   case "636":
   formsel.options[0]=new Option("贴片/片式/SMD三极管","764");
   formsel.options[1]=new Option("功率三极管","765");
   formsel.options[2]=new Option("开关三极管","519");
   formsel.options[3]=new Option("低噪声三极管","512");
   formsel.options[4]=new Option("超高频/高频三极管","768");
   formsel.options[5]=new Option("三端稳压管(器)","769");
   formsel.options[6]=new Option("复合(达林顿)三极管","516");
   formsel.options[7]=new Option("音响功率对管","766");
   formsel.options[8]=new Option("高反压三极管","770");
   formsel.options[9]=new Option("微波三极管","520");
   formsel.options[10]=new Option("带阻三极管","518");
   formsel.options[11]=new Option("阻尼三极管","1777");
   formsel.options[12]=new Option("快恢复三极管","767");
   formsel.options[13]=new Option("差分对管(双三极管)","1778");
   formsel.options[14]=new Option("光敏三极管","521");
   formsel.options[15]=new Option("磁敏三极管","515");
   formsel.options[16]=new Option("三极管芯片(管芯)","893");
   formsel.options[17]=new Option("其他三极管","522");
      break;
   case "504":
   formsel.options[0]=new Option("MOSFET","895");
   formsel.options[1]=new Option("结型场效应管","894");
   formsel.options[2]=new Option("IGBT模块","1254");
   formsel.options[3]=new Option("IPM模块","1255");
   formsel.options[4]=new Option("PIM模块","1256");
   formsel.options[5]=new Option("GTR达林顿模块","1257");
   formsel.options[6]=new Option("其他场效应管模块","1258");
      break;
   case "552":
   formsel.options[0]=new Option("单向可控硅(晶闸管)","1259");
   formsel.options[1]=new Option("双向可控硅(晶闸管)","1260");
   formsel.options[2]=new Option("可控硅(晶闸管)模块","1261");
      break;
   case "1155":
   formsel.options[0]=new Option("单片机产品/套件","1156");
   formsel.options[1]=new Option("单片机开发板","1157");
   formsel.options[2]=new Option("单片机实验板","1158");
   formsel.options[3]=new Option("单片机MCU","1159");
   formsel.options[4]=new Option("单片机仿真器","1160");
   formsel.options[5]=new Option("单片机编程器","1161");
   formsel.options[6]=new Option("单片机解密/开发","1162");
   formsel.options[7]=new Option("其它单片机配套产品/服务","1163");
      break;
   case "308":
   formsel.options[0]=new Option("贴片(片式/SMD)电容","581");
   formsel.options[1]=new Option("贴片可(微)调电容","867");
   formsel.options[2]=new Option("可(微)调电容","863");
   formsel.options[3]=new Option("铝电解电容","316");
   formsel.options[4]=new Option("无极性铝电解电容","865");
   formsel.options[5]=new Option("钽电解电容","317");
   formsel.options[6]=new Option("铌电解电容","1767");
   formsel.options[7]=new Option("钛电解电容","1768");
   formsel.options[8]=new Option("合金电解电容","1769");
   formsel.options[9]=new Option("有机铝固体电解电容(OS-CON电容)","1770");
   formsel.options[10]=new Option("安规电容","578");
   formsel.options[11]=new Option("高压电容","577");
   formsel.options[12]=new Option("超级(法拉/黄金)电容","579");
   formsel.options[13]=new Option("马达(启动)电容","1147");
   formsel.options[14]=new Option("瓷片(瓷介)电容","567");
   formsel.options[15]=new Option("瓷管电容","574");
   formsel.options[16]=new Option("陶瓷电容","313");
   formsel.options[17]=new Option("独石(层积)电容","575");
   formsel.options[18]=new Option("穿芯电容","576");
   formsel.options[19]=new Option("固态电容","1664");
   formsel.options[20]=new Option("混合介质电容","1771");
   formsel.options[21]=new Option("有机薄膜介质电容","1772");
   formsel.options[22]=new Option("涤纶电容","569");
   formsel.options[23]=new Option("聚丙烯(CBB)电容","570");
   formsel.options[24]=new Option("玻璃釉电容","315");
   formsel.options[25]=new Option("玻璃膜电容","319");
   formsel.options[26]=new Option("纸膜复合电容(纸介)电容","311");
   formsel.options[27]=new Option("云母电容","314");
   formsel.options[28]=new Option("无感电容","1148");
   formsel.options[29]=new Option("网络(排)电容","580");
   formsel.options[30]=new Option("自愈式电容器","860");
   formsel.options[31]=new Option("湿敏电容器","861");
   formsel.options[32]=new Option("三脚电容器","862");
   formsel.options[33]=new Option("校正电容器","864");
   formsel.options[34]=new Option("油浸电容","1773");
   formsel.options[35]=new Option("漆膜电容","1774");
   formsel.options[36]=new Option("真空电容","310");
   formsel.options[37]=new Option("双电层电容器(EDLC)","2046");
   formsel.options[38]=new Option("锂离子电容器","2047");
   formsel.options[39]=new Option("充气电容","1776");
   formsel.options[40]=new Option("其他电容","320");
      break;
   case "321":
   formsel.options[0]=new Option("贴片/片式电阻","594");
   formsel.options[1]=new Option("碳膜电阻","555");
   formsel.options[2]=new Option("金属(氧化)膜电阻","556");
   formsel.options[3]=new Option("氧化膜电阻","857");
   formsel.options[4]=new Option("复合膜电阻","1793");
   formsel.options[5]=new Option("合成膜电阻","1794");
   formsel.options[6]=new Option("玻璃釉膜电阻","856");
   formsel.options[7]=new Option("水泥电阻","557");
   formsel.options[8]=new Option("线绕电阻","558");
   formsel.options[9]=new Option("珐琅电阻","859");
   formsel.options[10]=new Option("熔断/保险丝电阻","559");
   formsel.options[11]=new Option("排阻/网络电阻","327");
   formsel.options[12]=new Option("高压电阻","854");
   formsel.options[13]=new Option("精密电阻","714");
   formsel.options[14]=new Option("高功率电阻","1795");
   formsel.options[15]=new Option("超高频电阻","1796");
   formsel.options[16]=new Option("高温电阻","1797");
   formsel.options[17]=new Option("厚膜电阻","1472");
   formsel.options[18]=new Option("薄膜电阻","1473");
   formsel.options[19]=new Option("实芯电阻","1474");
   formsel.options[20]=new Option("热敏电阻","560");
   formsel.options[21]=new Option("光敏电阻","561");
   formsel.options[22]=new Option("气敏电阻","562");
   formsel.options[23]=new Option("压敏电阻","563");
   formsel.options[24]=new Option("湿敏电阻","564");
   formsel.options[25]=new Option("力敏电阻","1798");
   formsel.options[26]=new Option("合金/铂电阻","715");
   formsel.options[27]=new Option("跳线/采样/毫欧电阻","1151");
   formsel.options[28]=new Option("高频无感电阻","716");
   formsel.options[29]=new Option("铝壳电阻","565");
   formsel.options[30]=new Option("刹车/制动电阻","1149");
   formsel.options[31]=new Option("圆盘电阻","855");
   formsel.options[32]=new Option("导电塑料电阻","1799");
   formsel.options[33]=new Option("电阻(负载)箱","858");
   formsel.options[34]=new Option("其他电阻","328");
      break;
   case "507":
   formsel.options[0]=new Option("贴片电感","688");
   formsel.options[1]=new Option("色环/色码电感","687");
   formsel.options[2]=new Option("空心线圈","1312");
   formsel.options[3]=new Option("磁珠/磁环（环型）电感","689");
   formsel.options[4]=new Option("中周/可调电感","690");
   formsel.options[5]=new Option("I型/棒型/一字型电感","691");
   formsel.options[6]=new Option("射频/高频电感","692");
   formsel.options[7]=new Option("功率电感","693");
   formsel.options[8]=new Option("扼流线圈电感","694");
   formsel.options[9]=new Option("共模电感","695");
   formsel.options[10]=new Option("EMI滤波器","696");
   formsel.options[11]=new Option("分频器","1164");
   formsel.options[12]=new Option("互感器","1244");
   formsel.options[13]=new Option("其他电感器","697");
      break;
   case "329":
   formsel.options[0]=new Option("合成碳膜电位器","330");
   formsel.options[1]=new Option("金属膜电位器","331");
   formsel.options[2]=new Option("陶瓷电位器","1292");
   formsel.options[3]=new Option("线绕电位器","332");
   formsel.options[4]=new Option("实芯电位器","333");
   formsel.options[5]=new Option("单圈、多圈电位器","334");
   formsel.options[6]=new Option("单连、双连电位器","335");
   formsel.options[7]=new Option("带开关/推拉电位器","336");
   formsel.options[8]=new Option("直滑式电位器","337");
   formsel.options[9]=new Option("导电塑料电位器","595");
   formsel.options[10]=new Option("精密电位器","596");
   formsel.options[11]=new Option("密封式电位器","597");
   formsel.options[12]=new Option("摇杆电位器","598");
   formsel.options[13]=new Option("步进/伺服电位器","599");
   formsel.options[14]=new Option("其他电位器","339");
      break;
   case "506":
   formsel.options[0]=new Option("模块电源/电源模块","837");
   formsel.options[1]=new Option("开关电源","834");
   formsel.options[2]=new Option("变频电源","842");
   formsel.options[3]=new Option("线性电源","1748");
   formsel.options[4]=new Option("恒流电源","1314");
   formsel.options[5]=new Option("高压电源","841");
   formsel.options[6]=new Option("直流稳压电源","832");
   formsel.options[7]=new Option("交流稳压电源","833");
   formsel.options[8]=new Option("电源适配器","850");
   formsel.options[9]=new Option("逆变(UPS)电源","835");
   formsel.options[10]=new Option("EPS应急电源","836");
   formsel.options[11]=new Option("电源充电器(机)","851");
   formsel.options[12]=new Option("照明(灯具)电源","838");
   formsel.options[13]=new Option("车载电源","843");
   formsel.options[14]=new Option("通信电源","844");
   formsel.options[15]=new Option("医疗(医用)电源","845");
   formsel.options[16]=new Option("净化电源","1315");
   formsel.options[17]=new Option("便携(移动)电源","846");
   formsel.options[18]=new Option("LED( PDP、LCD)电源","840");
   formsel.options[19]=new Option("PC电源","839");
   formsel.options[20]=new Option("工业设备电源","848");
   formsel.options[21]=new Option("可编程(数控、智能)电源","847");
   formsel.options[22]=new Option("定制(特种)电源","849");
   formsel.options[23]=new Option("电源解决方案","853");
   formsel.options[24]=new Option("其他类型电源","852");
      break;
   case "617":
   formsel.options[0]=new Option("贴片/片状电位器","621");
   formsel.options[1]=new Option("碳膜微调/预调电位器","618");
   formsel.options[2]=new Option("玻璃釉微调/预调电位器","619");
   formsel.options[3]=new Option("精密微调/预调电位器","620");
   formsel.options[4]=new Option("密封式微调/预调电位器","622");
   formsel.options[5]=new Option("其他微调/预调电位器","623");
      break;
   case "638":
   formsel.options[0]=new Option("贴片晶振","645");
   formsel.options[1]=new Option("晶振(普通)","644");
   formsel.options[2]=new Option("表振(晶)/钟振(晶)","647");
   formsel.options[3]=new Option("温补/恒温晶振","648");
   formsel.options[4]=new Option("压控晶振","649");
   formsel.options[5]=new Option("声表面器件","646");
   formsel.options[6]=new Option("其他晶振器件","650");
      break;
   case "637":
   formsel.options[0]=new Option("陶瓷滤波器","639");
   formsel.options[1]=new Option("陶瓷谐振器","640");
   formsel.options[2]=new Option("陶瓷陷波器","641");
   formsel.options[3]=new Option("陶瓷鉴频器","642");
   formsel.options[4]=new Option("压电陶瓷换能器（片）","1249");
   formsel.options[5]=new Option("其他压电陶瓷元件","643");
      break;
   case "383":
   formsel.options[0]=new Option("条形(压接式)连接器","776");
   formsel.options[1]=new Option("圆形连接器","777");
   formsel.options[2]=new Option("矩形/重载连接器","778");
   formsel.options[3]=new Option("射频(同轴)连接器","779");
   formsel.options[4]=new Option("PCB连接器","780");
   formsel.options[5]=new Option("线对线连接器","781");
   formsel.options[6]=new Option("板对板连接器","1817");
   formsel.options[7]=new Option("板对线连接器","1818");
   formsel.options[8]=new Option("FFC/FPC/薄膜电缆连接器","782");
   formsel.options[9]=new Option("电缆连接器","1819");
   formsel.options[10]=new Option("扁平电缆连接器","783");
   formsel.options[11]=new Option("电脑连接器","784");
   formsel.options[12]=new Option("USB连接器","1820");
   formsel.options[13]=new Option("HDMI连接器","1821");
   formsel.options[14]=new Option("D-SUB(VGA)连接器","1822");
   formsel.options[15]=new Option("视频/音频信号连接器","785");
   formsel.options[16]=new Option("手机连接器","786");
   formsel.options[17]=new Option("电源连接器","787");
   formsel.options[18]=new Option("汽车连接器","789");
   formsel.options[19]=new Option("高速信号连接器","791");
   formsel.options[20]=new Option("通讯连接器","1823");
   formsel.options[21]=new Option("IC连接器","1824");
   formsel.options[22]=new Option("传感器连接器","1825");
   formsel.options[23]=new Option("牛角/简牛连接器","1826");
   formsel.options[24]=new Option("线束连接器","1827");
   formsel.options[25]=new Option("光纤连接器","792");
   formsel.options[26]=new Option("航空连接器","790");
   formsel.options[27]=new Option("防水/水下/深水连接器","794");
   formsel.options[28]=new Option("耐高温/耐盐雾/耐湿连接器","795");
   formsel.options[29]=new Option("高压连接器","788");
   formsel.options[30]=new Option("LED连接器","1828");
   formsel.options[31]=new Option("显示屏连接器","1829");
   formsel.options[32]=new Option("电池连接器","1830");
   formsel.options[33]=new Option("PLCC连接器","1831");
   formsel.options[34]=new Option("微波连接器","793");
   formsel.options[35]=new Option("背板连接器","1832");
   formsel.options[36]=new Option("卡座类连接器","1833");
   formsel.options[37]=new Option("转接头(器)","1834");
   formsel.options[38]=new Option("卡座","389");
   formsel.options[39]=new Option("端子台","390");
   formsel.options[40]=new Option("接线座(柱)","1835");
   formsel.options[41]=new Option("接线排(条)","1836");
   formsel.options[42]=new Option("IC插座","392");
   formsel.options[43]=new Option("接线柱(头)","395");
   formsel.options[44]=new Option("端子","398");
   formsel.options[45]=new Option("端子接插件","1837");
   formsel.options[46]=new Option("光纤端子","1838");
   formsel.options[47]=new Option("端子盘","1839");
   formsel.options[48]=new Option("闭端子","1840");
   formsel.options[49]=new Option("排针(母)","1841");
   formsel.options[50]=new Option("插针(座)","1842");
   formsel.options[51]=new Option("耳机插头(座)","1843");
   formsel.options[52]=new Option("插头(座)","1844");
   formsel.options[53]=new Option("电源插头(座)","1845");
   formsel.options[54]=new Option("连接器胶壳","1846");
   formsel.options[55]=new Option("水晶头","1847");
   formsel.options[56]=new Option("鳄鱼夹","394");
   formsel.options[57]=new Option("线束","393");
   formsel.options[58]=new Option("其他连接器","396");
   formsel.options[59]=new Option("光伏连接器、太阳能连接器、新能源连接器","2174");
   formsel.options[60]=new Option("顶针连接器","2177");
   formsel.options[61]=new Option("以太网线连接器、网络连接器、网线插座连接器","2178");
   formsel.options[62]=new Option("套管","2179");
   formsel.options[63]=new Option("存储器连接器","2184");
   formsel.options[64]=new Option("重载连接器、HDC重载接插件","2287");
      break;
   case "411":
   formsel.options[0]=new Option("贴片/片式开关","429");
   formsel.options[1]=new Option("轻触开关","413");
   formsel.options[2]=new Option("自锁开关","1391");
   formsel.options[3]=new Option("轨迹球开关","1390");
   formsel.options[4]=new Option("微动开关","433");
   formsel.options[5]=new Option("联动开关","2019");
   formsel.options[6]=new Option("薄膜/金属弹片开关","419");
   formsel.options[7]=new Option("钮子（动）开关","416");
   formsel.options[8]=new Option("摇头开关","1697");
   formsel.options[9]=new Option("直键开关","430");
   formsel.options[10]=new Option("键盘开关","2020");
   formsel.options[11]=new Option("琴键开关","2017");
   formsel.options[12]=new Option("船形/跷板/波动开关","655");
   formsel.options[13]=new Option("按钮/按键开关","424");
   formsel.options[14]=new Option("组合开关","425");
   formsel.options[15]=new Option("检测开关","1262");
   formsel.options[16]=new Option("拨动/滑动开关","437");
   formsel.options[17]=new Option("推推式电源开关","440");
   formsel.options[18]=new Option("DIP/拨码开关","421");
   formsel.options[19]=new Option("(手机)天线开关","1229");
   formsel.options[20]=new Option("三向/五向/多向开关","1230");
   formsel.options[21]=new Option("舌簧/干簧管（磁控管）开关","439");
   formsel.options[22]=new Option("编码开关","435");
   formsel.options[23]=new Option("侧按开关","656");
   formsel.options[24]=new Option("触摸/感应开关","657");
   formsel.options[25]=new Option("旋转/波段开关","427");
   formsel.options[26]=new Option("霍尔开关","658");
   formsel.options[27]=new Option("叶片开关","659");
   formsel.options[28]=new Option("电器开关","665");
   formsel.options[29]=new Option("温控/温度开关","412");
   formsel.options[30]=new Option("光电开关","422");
   formsel.options[31]=new Option("磁敏/磁性开关","661");
   formsel.options[32]=new Option("定时/时控开关","663");
   formsel.options[33]=new Option("遥控开关","662");
   formsel.options[34]=new Option("其他电子类开关","441");
   formsel.options[35]=new Option("接近开关","428");
   formsel.options[36]=new Option("行程开关","434");
   formsel.options[37]=new Option("空气开关","415");
   formsel.options[38]=new Option("防水开关","667");
   formsel.options[39]=new Option("墙壁开关","664");
   formsel.options[40]=new Option("压力开关","660");
   formsel.options[41]=new Option("杠杆式开关","417");
   formsel.options[42]=new Option("倒顺开关","1375");
   formsel.options[43]=new Option("脚踏开关","668");
   formsel.options[44]=new Option("隔离开关","669");
   formsel.options[45]=new Option("液位/水位/料位开关","1269");
   formsel.options[46]=new Option("限位开关","670");
   formsel.options[47]=new Option("复位开关","1303");
   formsel.options[48]=new Option("凸轮开关","671");
   formsel.options[49]=new Option("拉绳（线）开关","672");
   formsel.options[50]=new Option("线上开关","1698");
   formsel.options[51]=new Option("声控开关","432");
   formsel.options[52]=new Option("水银开关","673");
   formsel.options[53]=new Option("刀开关","674");
   formsel.options[54]=new Option("高压开关","675");
   formsel.options[55]=new Option("负荷开关","1374");
   formsel.options[56]=new Option("双位开关","1231");
   formsel.options[57]=new Option("钥匙开关","1232");
   formsel.options[58]=new Option("跑偏/离心开关","1233");
   formsel.options[59]=new Option("振动开关","1234");
   formsel.options[60]=new Option("超声波开关","1235");
   formsel.options[61]=new Option("超速开关","1236");
   formsel.options[62]=new Option("欠速开关","1280");
   formsel.options[63]=new Option("双电源开关","1237");
   formsel.options[64]=new Option("流量开关","1271");
   formsel.options[65]=new Option("十字开关","1272");
   formsel.options[66]=new Option("同期开关","1274");
   formsel.options[67]=new Option("急停开关","1275");
   formsel.options[68]=new Option("天车开关","1276");
   formsel.options[69]=new Option("选择开关","1297");
   formsel.options[70]=new Option("扣押开关","1273");
   formsel.options[71]=new Option("扳机/电动工具开关","2018");
   formsel.options[72]=new Option("防爆开关","1296");
   formsel.options[73]=new Option("光纤开关","1298");
   formsel.options[74]=new Option("万向开关","1299");
   formsel.options[75]=new Option("双投开关","1301");
   formsel.options[76]=new Option("多段式切换开关","1302");
   formsel.options[77]=new Option("弹簧震动开关","2308");
   formsel.options[78]=new Option("滚珠振动开关","2309");
   formsel.options[79]=new Option("其他工程设备类开关","677");
      break;
   case "471":
   formsel.options[0]=new Option("光电/光敏传感器","478");
   formsel.options[1]=new Option("光学传感器","1805");
   formsel.options[2]=new Option("电磁传感器","473");
   formsel.options[3]=new Option("磁敏传感器","1806");
   formsel.options[4]=new Option("霍尔传感器","717");
   formsel.options[5]=new Option("电流(压)传感器","1807");
   formsel.options[6]=new Option("电量传感器","733");
   formsel.options[7]=new Option("电场传感器","1304");
   formsel.options[8]=new Option("电导率传感器","1486");
   formsel.options[9]=new Option("电学传感器","1808");
   formsel.options[10]=new Option("压电传感器","727");
   formsel.options[11]=new Option("温(湿)度传感器","472");
   formsel.options[12]=new Option("热敏传感器","1809");
   formsel.options[13]=new Option("声波/声敏传感器","475");
   formsel.options[14]=new Option("光纤/激光传感器","474");
   formsel.options[15]=new Option("测距/距离传感器","1263");
   formsel.options[16]=new Option("视觉/图像传感器","485");
   formsel.options[17]=new Option("微波传感器","718");
   formsel.options[18]=new Option("光栅(幕)传感器","719");
   formsel.options[19]=new Option("压力传感器","481");
   formsel.options[20]=new Option("力敏传感器","1810");
   formsel.options[21]=new Option("称重传感器","1811");
   formsel.options[22]=new Option("测力/力矩/扭矩传感器","720");
   formsel.options[23]=new Option("速度传感器","484");
   formsel.options[24]=new Option("加速度传感器","1812");
   formsel.options[25]=new Option("气体/气敏/烟雾传感器","479");
   formsel.options[26]=new Option("液位传感器","480");
   formsel.options[27]=new Option("物(料)位传感器","1813");
   formsel.options[28]=new Option("振动/接近/位移传感器","483");
   formsel.options[29]=new Option("线性传感器","1746");
   formsel.options[30]=new Option("开关传感器","1747");
   formsel.options[31]=new Option("齿轮传感器","1848");
   formsel.options[32]=new Option("流量传感器","487");
   formsel.options[33]=new Option("风速/风向/风量传感器","721");
   formsel.options[34]=new Option("角度/倾角传感器","722");
   formsel.options[35]=new Option("射线辐射传感器","723");
   formsel.options[36]=new Option("色标/颜色传感器","724");
   formsel.options[37]=new Option("火焰(警)传感器","725");
   formsel.options[38]=new Option("旋转传感器","1195");
   formsel.options[39]=new Option("区域传感器","1196");
   formsel.options[40]=new Option("位置传感器","1814");
   formsel.options[41]=new Option("高压传感器","1197");
   formsel.options[42]=new Option("压差传感器","1198");
   formsel.options[43]=new Option("负压传感器","1713");
   formsel.options[44]=new Option("长度传感器","1199");
   formsel.options[45]=new Option("电阻/电容/电感传感器","1200");
   formsel.options[46]=new Option("分析传感器","1201");
   formsel.options[47]=new Option("硬度传感器","1488");
   formsel.options[48]=new Option("密度传感器","1489");
   formsel.options[49]=new Option("惯性传感器","1490");
   formsel.options[50]=new Option("汽车传感器","728");
   formsel.options[51]=new Option("MEMS传感器","1491");
   formsel.options[52]=new Option("陀螺仪","1493");
   formsel.options[53]=new Option("真空度传感器","1815");
   formsel.options[54]=new Option("能耗传感器","1816");
   formsel.options[55]=new Option("离子传感器","1487");
   formsel.options[56]=new Option("纳米传感器","1492");
   formsel.options[57]=new Option("生物传感器","726");
   formsel.options[58]=new Option("贴片振动传感器","2310");
   formsel.options[59]=new Option("其他传感器","488");
      break;
   case "539":
   formsel.options[0]=new Option("贴片保险丝","540");
   formsel.options[1]=new Option("玻璃管保险丝","545");
   formsel.options[2]=new Option("陶瓷管保险丝","549");
   formsel.options[3]=new Option("自恢复保险丝","544");
   formsel.options[4]=new Option("温度保险丝","547");
   formsel.options[5]=new Option("电流保险丝","606");
   formsel.options[6]=new Option("塑封保险丝","607");
   formsel.options[7]=new Option("汽车/插片保险丝","608");
   formsel.options[8]=new Option("熔断保险丝","609");
   formsel.options[9]=new Option("保险丝座/保险丝夹","548");
   formsel.options[10]=new Option("其它保险丝","550");
      break;
   case "610":
   formsel.options[0]=new Option("气体放电管","611");
   formsel.options[1]=new Option("陶瓷放电管","612");
   formsel.options[2]=new Option("玻璃放电管","613");
   formsel.options[3]=new Option("半导体放电管","614");
   formsel.options[4]=new Option("固体放电管","616");
   formsel.options[5]=new Option("其他放电管","615");
      break;
   case "505":
   formsel.options[0]=new Option("铅酸电池","1671");
   formsel.options[1]=new Option("铅酸蓄电池","1685");
   formsel.options[2]=new Option("锂(锂离子)电池","1670");
   formsel.options[3]=new Option("锂离子蓄电池","1687");
   formsel.options[4]=new Option("镍氢电池","1669");
   formsel.options[5]=new Option("镍镉电池","1668");
   formsel.options[6]=new Option("碳锌电池","1672");
   formsel.options[7]=new Option("锌锰电池","1673");
   formsel.options[8]=new Option("碱性(锌锰)电池","1674");
   formsel.options[9]=new Option("纽扣(扣式)电池","1766");
   formsel.options[10]=new Option("硅光(非晶硅)电池","1681");
   formsel.options[11]=new Option("太阳能电池(板)","1755");
   formsel.options[12]=new Option("聚合物电池","1683");
   formsel.options[13]=new Option("锌空气电池","1678");
   formsel.options[14]=new Option("水银电池","1679");
   formsel.options[15]=new Option("物理电池","1680");
   formsel.options[16]=new Option("金属氢化物电池","1684");
   formsel.options[17]=new Option("动力电池","1756");
   formsel.options[18]=new Option("磷酸铁锂电池","2021");
   formsel.options[19]=new Option("三元电池","2022");
   formsel.options[20]=new Option("储能电池","1757");
   formsel.options[21]=new Option("手机电池","1758");
   formsel.options[22]=new Option("电动车蓄电池(瓶)","1759");
   formsel.options[23]=new Option("BMS(电池管理系统)","1760");
   formsel.options[24]=new Option("电池极板","1761");
   formsel.options[25]=new Option("电池隔膜","1762");
   formsel.options[26]=new Option("电池电解液","1763");
   formsel.options[27]=new Option("电池盒(壳)","1764");
   formsel.options[28]=new Option("电池座(扣、接头)","1765");
   formsel.options[29]=new Option("其它(蓄)电池","1688");
   formsel.options[30]=new Option("其它(蓄)电池配件","1689");
      break;
   case "340":
   formsel.options[0]=new Option("整流/电源变压器","868");
   formsel.options[1]=new Option("电子/开关/脉冲变压器","869");
   formsel.options[2]=new Option("音频变压器","870");
   formsel.options[3]=new Option("回扫/行输出变压器","871");
   formsel.options[4]=new Option("网络变压器","872");
   formsel.options[5]=new Option("通讯变压器","873");
   formsel.options[6]=new Option("隔离变压器","874");
   formsel.options[7]=new Option("控制变压器","875");
   formsel.options[8]=new Option("调压器/自耦变压器","876");
   formsel.options[9]=new Option("CVT/恒压变压器","877");
   formsel.options[10]=new Option("高频变压器","878");
   formsel.options[11]=new Option("逆变变压器","879");
   formsel.options[12]=new Option("组合式变压器","880");
   formsel.options[13]=new Option("干式电力变压器","881");
   formsel.options[14]=new Option("油浸式电力变压器","882");
   formsel.options[15]=new Option("变流变压器","883");
   formsel.options[16]=new Option("高温超导变压器","884");
   formsel.options[17]=new Option("射频变压器","2037");
   formsel.options[18]=new Option("电流变压器","2038");
   formsel.options[19]=new Option("集成变压器","2039");
   formsel.options[20]=new Option("密封变压器","2040");
   formsel.options[21]=new Option("环形变压器","2041");
   formsel.options[22]=new Option("防爆变压器","2042");
   formsel.options[23]=new Option("压电陶瓷变压器","2043");
   formsel.options[24]=new Option("变压器骨架","885");
   formsel.options[25]=new Option("变压器外壳","886");
   formsel.options[26]=new Option("变压器铁（磁）芯","887");
   formsel.options[27]=new Option("变压器油","888");
   formsel.options[28]=new Option("其他变压器","890");
   formsel.options[29]=new Option("其他变压器配件","891");
   formsel.options[30]=new Option("平衡/不平衡变压器","2045");
      break;
   case "1699":
   formsel.options[0]=new Option("电压变送器","1700");
   formsel.options[1]=new Option("电流变送器","1701");
   formsel.options[2]=new Option("电力变送器","1702");
   formsel.options[3]=new Option("一般压力变送器","1703");
   formsel.options[4]=new Option("差压/微差压变送器","1704");
   formsel.options[5]=new Option("负压变送器","1705");
   formsel.options[6]=new Option("温度/温湿度变送器","1706");
   formsel.options[7]=new Option("流量变送器","1707");
   formsel.options[8]=new Option("位移变送器","1708");
   formsel.options[9]=new Option("震（振）动变送器","1709");
   formsel.options[10]=new Option("液位/物位变送器","1710");
   formsel.options[11]=new Option("密度变送器","1711");
   formsel.options[12]=new Option("其它变送器","1712");
      break;
   case "364":
   formsel.options[0]=new Option("电磁继电器","365");
   formsel.options[1]=new Option("磁保持继电器","1749");
   formsel.options[2]=new Option("极化继电器","680");
   formsel.options[3]=new Option("功率继电器","730");
   formsel.options[4]=new Option("舌簧(磁簧、干簧式)继电器","366");
   formsel.options[5]=new Option("湿簧(剩簧)继电器","367");
   formsel.options[6]=new Option("信号继电器","368");
   formsel.options[7]=new Option("时间(延时)继电器","678");
   formsel.options[8]=new Option("中间继电器","372");
   formsel.options[9]=new Option("固态继电器","371");
   formsel.options[10]=new Option("光藕(光电)继电器","681");
   formsel.options[11]=new Option("汽车继电器","369");
   formsel.options[12]=new Option("热继电器","373");
   formsel.options[13]=new Option("温度继电器","1750");
   formsel.options[14]=new Option("通信继电器","686");
   formsel.options[15]=new Option("高频继电器","679");
   formsel.options[16]=new Option("密封继电器","732");
   formsel.options[17]=new Option("差动继电器","685");
   formsel.options[18]=new Option("过流(欠流、欠相)继电器","1190");
   formsel.options[19]=new Option("电力继电器","1191");
   formsel.options[20]=new Option("高压(电压)继电器","1192");
   formsel.options[21]=new Option("安全继电器","1193");
   formsel.options[22]=new Option("射频同轴继电器","1194");
   formsel.options[23]=new Option("压力继电器","1238");
   formsel.options[24]=new Option("控制继电器","1751");
   formsel.options[25]=new Option("启动继电器","1752");
   formsel.options[26]=new Option("冲击继电器","1753");
   formsel.options[27]=new Option("仪表式继电器","684");
   formsel.options[28]=new Option("霍尔效应继电器","683");
   formsel.options[29]=new Option("水银继电器","729");
   formsel.options[30]=new Option("MOS FET继电器","1665");
   formsel.options[31]=new Option("声继电器","682");
   formsel.options[32]=new Option("真空继电器","1754");
   formsel.options[33]=new Option("继电器模组","1278");
   formsel.options[34]=new Option("其他继电器","375");
      break;
   case "376":
   formsel.options[0]=new Option("恒转矩变频器","377");
   formsel.options[1]=new Option("恒功率变频器","378");
   formsel.options[2]=new Option("平方转矩型变频器","379");
   formsel.options[3]=new Option("高性能通用变频器","380");
   formsel.options[4]=new Option("专用变频器","381");
   formsel.options[5]=new Option("其他变频器","382");
      break;
   case "500":
   formsel.options[0]=new Option("正弦波逆变器","1715");
   formsel.options[1]=new Option("准正弦波逆变器","1716");
   formsel.options[2]=new Option("方波逆变器","1717");
   formsel.options[3]=new Option("其它逆变器","1718");
      break;
   case "501":
   formsel.options[0]=new Option("放大器","2051");
      break;
   case "734":
   formsel.options[0]=new Option("电动式扬声器","736");
   formsel.options[1]=new Option("静电式扬声器","737");
   formsel.options[2]=new Option("电磁式扬声器","738");
   formsel.options[3]=new Option("蜂鸣器（片）/振铃/压电（陶瓷）扬声器","741");
   formsel.options[4]=new Option("手机扬声器","739");
   formsel.options[5]=new Option("电视机扬声器","740");
   formsel.options[6]=new Option("笔记本电脑扬声器","742");
   formsel.options[7]=new Option("汽车扬声器","743");
   formsel.options[8]=new Option("信号扬声器","1277");
   formsel.options[9]=new Option("电吉他/乐器扬声器","744");
   formsel.options[10]=new Option("号筒（角）扬声器","745");
   formsel.options[11]=new Option("薄型扬声器","746");
   formsel.options[12]=new Option("平板扬声器","747");
   formsel.options[13]=new Option("防水扬声器","748");
   formsel.options[14]=new Option("球顶高音扬声器","749");
   formsel.options[15]=new Option("宽频/全频扬声器","750");
   formsel.options[16]=new Option("吸顶/草坪扬声器","751");
   formsel.options[17]=new Option("耳机/微型扬声器","752");
   formsel.options[18]=new Option("驻极体话筒/咪头","1435");
   formsel.options[19]=new Option("动圈式话筒","1436");
   formsel.options[20]=new Option("其他扬声器","753");
      break;
   case "735":
   formsel.options[0]=new Option("T铁","754");
   formsel.options[1]=new Option("U铁","948");
   formsel.options[2]=new Option("音圈","755");
   formsel.options[3]=new Option("音膜/振膜","756");
   formsel.options[4]=new Option("音盆/鼓纸","949");
   formsel.options[5]=new Option("定位支片","950");
   formsel.options[6]=new Option("盆架/网罩","951");
   formsel.options[7]=new Option("夹板","952");
   formsel.options[8]=new Option("防尘罩","953");
   formsel.options[9]=new Option("垫边/压边","954");
   formsel.options[10]=new Option("接线板","955");
   formsel.options[11]=new Option("其它电声(扬声器)配件","956");
      break;
   case "407":
   formsel.options[0]=new Option("单面线路板","698");
   formsel.options[1]=new Option("双面/多层线路板","699");
   formsel.options[2]=new Option("碳膜线路板","1242");
   formsel.options[3]=new Option("薄膜线路板","1243");
   formsel.options[4]=new Option("柔性/挠性线路板（FPC）","700");
   formsel.options[5]=new Option("柔性排线（FFC）","701");
   formsel.options[6]=new Option("刚柔复合/软硬结合线路板","702");
   formsel.options[7]=new Option("线路板基材（板）","703");
   formsel.options[8]=new Option("线路板设计/抄板","704");
   formsel.options[9]=new Option("其他线路板","410");
      break;
   case "1849":
   formsel.options[0]=new Option("电子线材","1850");
   formsel.options[1]=new Option("线束","1851");
   formsel.options[2]=new Option("网线","1852");
   formsel.options[3]=new Option("音频视频线","1853");
   formsel.options[4]=new Option("电源线","1854");
   formsel.options[5]=new Option("高温线","1855");
   formsel.options[6]=new Option("裸电线","1856");
   formsel.options[7]=new Option("漆包线","1857");
   formsel.options[8]=new Option("电磁线","1858");
   formsel.options[9]=new Option("排线","1859");
   formsel.options[10]=new Option("跳线","1860");
   formsel.options[11]=new Option("连接线","1861");
   formsel.options[12]=new Option("线盘","1862");
   formsel.options[13]=new Option("裸电线","1863");
   formsel.options[14]=new Option("护套线","1864");
   formsel.options[15]=new Option("绝缘导线","1865");
   formsel.options[16]=new Option("同轴电缆","1866");
   formsel.options[17]=new Option("射频电缆","1867");
   formsel.options[18]=new Option("通讯电缆及光纤","1868");
   formsel.options[19]=new Option("数据电缆","1869");
   formsel.options[20]=new Option("信号电缆","1870");
   formsel.options[21]=new Option("电力电缆","1871");
   formsel.options[22]=new Option("高压电缆","1872");
   formsel.options[23]=new Option("控制电缆","1873");
   formsel.options[24]=new Option("光纤电缆","1874");
   formsel.options[25]=new Option("塑料/橡套线缆","1875");
   formsel.options[26]=new Option("屏蔽电缆","1876");
   formsel.options[27]=new Option("阻燃线缆","1877");
   formsel.options[28]=new Option("特种电缆","1878");
   formsel.options[29]=new Option("家装电线线缆","1879");
   formsel.options[30]=new Option("安防监控线缆","1880");
   formsel.options[31]=new Option("电气设备线缆","1881");
   formsel.options[32]=new Option("仪器仪表线缆","1882");
   formsel.options[33]=new Option("电缆接头","1883");
   formsel.options[34]=new Option("穿管器","1884");
   formsel.options[35]=new Option("网管","1885");
   formsel.options[36]=new Option("其他电线电缆","1886");
   formsel.options[37]=new Option("其他电线电缆附件","1887");
      break;
   case "553":
   formsel.options[0]=new Option("民用视听产品天线","897");
   formsel.options[1]=new Option("电脑/IT/多媒体产品天线","899");
   formsel.options[2]=new Option("手机/移动通信设备天线","900");
   formsel.options[3]=new Option("专业广播电视设备天线","902");
   formsel.options[4]=new Option("微波通信设备天线","903");
   formsel.options[5]=new Option("宽带通信设备天线","904");
   formsel.options[6]=new Option("车载/车用设备天线","905");
   formsel.options[7]=new Option("航空/航天/军用设备天线","906");
   formsel.options[8]=new Option("其他天线","907");
      break;
   case "442":
   formsel.options[0]=new Option("红外线发射管","446");
   formsel.options[1]=new Option("红外线接收头","447");
   formsel.options[2]=new Option("光电光耦合器(光耦)","1281");
   formsel.options[3]=new Option("光纤放大器","448");
   formsel.options[4]=new Option("光纤/光缆","1288");
   formsel.options[5]=new Option("光/光纤衰减器","449");
   formsel.options[6]=new Option("光纤波分复用器","450");
   formsel.options[7]=new Option("光接收机","451");
   formsel.options[8]=new Option("光发射机","452");
   formsel.options[9]=new Option("光纤收发器","453");
   formsel.options[10]=new Option("光纤交换机","1289");
   formsel.options[11]=new Option("光纤分支/分路/分配器","454");
   formsel.options[12]=new Option("光纤适配器","1287");
   formsel.options[13]=new Option("光纤跳线/尾纤","455");
   formsel.options[14]=new Option("光纤连接器","456");
   formsel.options[15]=new Option("光纤藕合器","1285");
   formsel.options[16]=new Option("光纤接头/接续/终端盒","457");
   formsel.options[17]=new Option("光纤配线架（箱）","1270");
   formsel.options[18]=new Option("光电隔离/转换中继器","458");
   formsel.options[19]=new Option("光纤环形器","1290");
   formsel.options[20]=new Option("光纤网卡","1282");
   formsel.options[21]=new Option("光端机","459");
   formsel.options[22]=new Option("光续断器","1268");
   formsel.options[23]=new Option("激光头","445");
   formsel.options[24]=new Option("激光器","460");
   formsel.options[25]=new Option("其他光电子、激光器件","461");
      break;
   case "771":
   formsel.options[0]=new Option("电压合成(VS)电子调谐器(高频头)","772");
   formsel.options[1]=new Option("频率合成(FS)电子调谐器(高频头)","773");
   formsel.options[2]=new Option("其他电子调谐器(高频头)","774");
      break;
   case "1719":
   formsel.options[0]=new Option("直流电动机","1720");
   formsel.options[1]=new Option("交流电动机","1721");
   formsel.options[2]=new Option("自态角电机","1722");
   formsel.options[3]=new Option("步进电动机","1723");
   formsel.options[4]=new Option("旋转变压器","1724");
   formsel.options[5]=new Option("轴角编码器","1725");
   formsel.options[6]=new Option("交直流两用电动机","1726");
   formsel.options[7]=new Option("测速发电机","1727");
   formsel.options[8]=new Option("感应同步器","1728");
   formsel.options[9]=new Option("直线电机","1729");
   formsel.options[10]=new Option("压电电动机","1730");
   formsel.options[11]=new Option("电机机组","1731");
   formsel.options[12]=new Option("其他特种电机","1732");
      break;
   case "291":
   formsel.options[0]=new Option("LED器件","1575");
   formsel.options[1]=new Option("LED室内照明灯具","1420");
   formsel.options[2]=new Option("LED户外/景观照明灯具","1421");
   formsel.options[3]=new Option("LED特种照明灯具","1422");
   formsel.options[4]=new Option("LED灯饰","1494");
   formsel.options[5]=new Option("LED汽车照明灯饰","1470");
   formsel.options[6]=new Option("LED照明工程","1424");
   formsel.options[7]=new Option("LED显示屏(模组)","830");
   formsel.options[8]=new Option("LED背光源","1418");
   formsel.options[9]=new Option("OLED/EL","1581");
   formsel.options[10]=new Option("LED芯片及外延","1402");
   formsel.options[11]=new Option("LED电源驱动/控制/软件","1588");
   formsel.options[12]=new Option("LED原材料与辅料","1593");
   formsel.options[13]=new Option("LED产品认证服务","1636");
   formsel.options[14]=new Option("其它LED相关产品（服务）","1637");
      break;
   case "462":
   formsel.options[0]=new Option("字符/字段/图形点阵LCD液晶显示模块(屏)","464");
   formsel.options[1]=new Option("TN/STN/CSTN/FSTN LCD液晶显示模块(屏)","816");
   formsel.options[2]=new Option("TFT LCD液晶显示屏(模块)","818");
   formsel.options[3]=new Option("手机LCD液晶显示屏(模块)","819");
   formsel.options[4]=new Option("VFD荧光显示模块(屏)","820");
   formsel.options[5]=new Option("OLED液晶显示模块(屏)","821");
   formsel.options[6]=new Option("EL电致发光片/冷光片","822");
   formsel.options[7]=new Option("PDP/等离子显示屏","831");
   formsel.options[8]=new Option("彩色/黑白CRT显象管(显示管)","823");
   formsel.options[9]=new Option("CRT投影管","824");
   formsel.options[10]=new Option("触摸屏","825");
   formsel.options[11]=new Option("DID液晶拼接屏","1475");
   formsel.options[12]=new Option("DLP光显屏(组件)","826");
   formsel.options[13]=new Option("LCOS显示屏(组件)","827");
   formsel.options[14]=new Option("背光源/背光源组件","469");
   formsel.options[15]=new Option("导光板/增光膜/反射膜/偏光片/背光源配件零配件","828");
   formsel.options[16]=new Option("平板电视壁挂架/台架/吊架","1178");
   formsel.options[17]=new Option("逻辑板","1425");
   formsel.options[18]=new Option("高压板","1426");
   formsel.options[19]=new Option("驱动板","1427");
   formsel.options[20]=new Option("CCFL液晶灯管","1428");
   formsel.options[21]=new Option("其他显示器件","470");
      break;
   case "350":
      break;
   case "1165":
   formsel.options[0]=new Option("整体式PLC","1648");
   formsel.options[1]=new Option("模块式PLC","1649");
   formsel.options[2]=new Option("叠装式PLC","1650");
      break;
   case "503":
   formsel.options[0]=new Option("旋转编码器","1412");
   formsel.options[1]=new Option("光电编码器","1413");
   formsel.options[2]=new Option("工业编码器","1414");
   formsel.options[3]=new Option("其他编码器","1415");
      break;
   case "909":
   formsel.options[0]=new Option("监控系统","910");
   formsel.options[1]=new Option("防盗报警","911");
   formsel.options[2]=new Option("对讲设备","912");
   formsel.options[3]=new Option("门禁考勤系统","933");
   formsel.options[4]=new Option("传输系统","913");
      break;
   case "957":
   formsel.options[0]=new Option("智能手表","2010");
   formsel.options[1]=new Option("电子书/电子阅读器","1376");
   formsel.options[2]=new Option("MP3/MP4/MP5","958");
   formsel.options[3]=new Option("数码相框","1247");
   formsel.options[4]=new Option("广告机","1655");
   formsel.options[5]=new Option("电子白板","1691");
   formsel.options[6]=new Option("数码相机","973");
   formsel.options[7]=new Option("数码摄像机","1429");
   formsel.options[8]=new Option("手机","959");
   formsel.options[9]=new Option("无线对讲机","1246");
   formsel.options[10]=new Option("无线收发器（模块）","1338");
   formsel.options[11]=new Option("台式电脑主机","960");
   formsel.options[12]=new Option("MID/平板电脑","1353");
   formsel.options[13]=new Option("笔记本/上网本","961");
   formsel.options[14]=new Option("上网卡","1345");
   formsel.options[15]=new Option("摄像头(模组)","1317");
   formsel.options[16]=new Option("鼠标","1169");
   formsel.options[17]=new Option("计算机键盘","1170");
   formsel.options[18]=new Option("移动硬盘/U盘","1014");
   formsel.options[19]=new Option("电脑显示器","962");
   formsel.options[20]=new Option("GPS","963");
   formsel.options[21]=new Option("游戏机","964");
   formsel.options[22]=new Option("无线耳机","965");
   formsel.options[23]=new Option("收音机/随身听","966");
   formsel.options[24]=new Option("汽车音响","1168");
   formsel.options[25]=new Option("功放/扩音机","967");
   formsel.options[26]=new Option("多媒体音箱/音箱","1167");
   formsel.options[27]=new Option("调音台","968");
   formsel.options[28]=new Option("OTT","1997");
   formsel.options[29]=new Option("机顶盒","969");
   formsel.options[30]=new Option("CRT显像管电视机","970");
   formsel.options[31]=new Option("DID大屏幕拼接墙","1477");
   formsel.options[32]=new Option("LCD液晶电视机","971");
   formsel.options[33]=new Option("PDP等离子电视机","972");
   formsel.options[34]=new Option("投影机","974");
   formsel.options[35]=new Option("高清/硬盘播放机","1384");
   formsel.options[36]=new Option("DVD/IPDVD","975");
   formsel.options[37]=new Option("遥控器","976");
   formsel.options[38]=new Option("无绳/固定电话机","977");
   formsel.options[39]=new Option("电源适配器","978");
   formsel.options[40]=new Option("电磁炉","1177");
   formsel.options[41]=new Option("电子玩具","1245");
   formsel.options[42]=new Option("PCB板卡","1745");
   formsel.options[43]=new Option("其它电子信息产品","979");
   formsel.options[44]=new Option("PCBA","2050");
      break;
   case "981":
   formsel.options[0]=new Option("万用表/多用电表","982");
   formsel.options[1]=new Option("毫欧/毫伏表","983");
   formsel.options[2]=new Option("兆欧表(摇表)","984");
   formsel.options[3]=new Option("电桥","985");
   formsel.options[4]=new Option("LCR测试仪","986");
   formsel.options[5]=new Option("高频Q表","1173");
   formsel.options[6]=new Option("直流电子负载","1251");
   formsel.options[7]=new Option("衰减器","1265");
   formsel.options[8]=new Option("场效应管测试仪","1311");
   formsel.options[9]=new Option("晶体管特性图示仪","987");
   formsel.options[10]=new Option("示波器","1013");
   formsel.options[11]=new Option("数据采集仪","1294");
   formsel.options[12]=new Option("扫频仪","1174");
   formsel.options[13]=new Option("集成电路测试仪","988");
   formsel.options[14]=new Option("特斯拉计/高斯计/磁通计","989");
   formsel.options[15]=new Option("失真仪/抖晃(摆)仪","990");
   formsel.options[16]=new Option("高(耐)压/绝缘测试仪","991");
   formsel.options[17]=new Option("漏电流测试仪","1141");
   formsel.options[18]=new Option("信号发生器/信号源模块","992");
   formsel.options[19]=new Option("相位测试仪","993");
   formsel.options[20]=new Option("场强仪","994");
   formsel.options[21]=new Option("频率计/频率计数器","995");
   formsel.options[22]=new Option("功率计","996");
   formsel.options[23]=new Option("功率分析仪","1646");
   formsel.options[24]=new Option("微波功率计","1295");
   formsel.options[25]=new Option("光功率计","1291");
   formsel.options[26]=new Option("红外/遥控编码测试仪","997");
   formsel.options[27]=new Option("视频/音频分析仪","998");
   formsel.options[28]=new Option("电声测试/分析仪","1250");
   formsel.options[29]=new Option("分贝仪/声压(级)计","1140");
   formsel.options[30]=new Option("亮度/照度计","1152");
   formsel.options[31]=new Option("色度计","1690");
   formsel.options[32]=new Option("色彩分析仪/白平衡测试仪","1248");
   formsel.options[33]=new Option("噪声系数测试/分析仪","999");
   formsel.options[34]=new Option("调制度分析仪","1000");
   formsel.options[35]=new Option("阻抗分析仪","1001");
   formsel.options[36]=new Option("频谱分析仪","1002");
   formsel.options[37]=new Option("网络分析仪","1003");
   formsel.options[38]=new Option("网络测试仪","1647");
   formsel.options[39]=new Option("矢量信号分析仪","1004");
   formsel.options[40]=new Option("误码分析仪","1005");
   formsel.options[41]=new Option("逻辑分析仪","1006");
   formsel.options[42]=new Option("可焊性测试仪","1008");
   formsel.options[43]=new Option("静电（场）测试仪","1139");
   formsel.options[44]=new Option("变压器/线圈测试仪","1009");
   formsel.options[45]=new Option("表面/接地/绝缘电阻测试仪","1154");
   formsel.options[46]=new Option("电子测量用工夹具","1012");
   formsel.options[47]=new Option("综合测试/分析仪","1010");
   formsel.options[48]=new Option("蓝牙测试仪","1253");
   formsel.options[49]=new Option("手机/通讯测试仪","1175");
   formsel.options[50]=new Option("PCB功能（电参数）测试仪","1359");
   formsel.options[51]=new Option("在线测试仪","1176");
   formsel.options[52]=new Option("电磁兼容（EMC）测量仪器","1172");
   formsel.options[53]=new Option("点温计","1264");
   formsel.options[54]=new Option("测量探头及附（配）件","1293");
   formsel.options[55]=new Option("其它电子测量仪器","1011");
      break;
   case "536":
   formsel.options[0]=new Option("高温/低温/高低温试验设备","1130");
   formsel.options[1]=new Option("温湿度试验设备","1131");
   formsel.options[2]=new Option("盐雾试验设备","1133");
   formsel.options[3]=new Option("二氧化硫/硫化氢试验设备","1496");
   formsel.options[4]=new Option("紫外线/臭氧老化试验设备","1497");
   formsel.options[5]=new Option("振动试验设备","1134");
   formsel.options[6]=new Option("机械跌落/冲击/碰撞试验设备","1135");
   formsel.options[7]=new Option("拉力/扭力(矩)试验设备","1136");
   formsel.options[8]=new Option("开关/按键寿命试验设备","1351");
   formsel.options[9]=new Option("线材摇摆/弯折试验设备","1352");
   formsel.options[10]=new Option("可焊性试验设备","1137");
   formsel.options[11]=new Option("燃烧/阻燃试验设备","1142");
   formsel.options[12]=new Option("ROSH检测试验设备","1143");
   formsel.options[13]=new Option("纸箱/包装箱试验设备","1279");
   formsel.options[14]=new Option("其他试验设备","1138");
      break;
   case "1360":
   formsel.options[0]=new Option("SMT生产线设备","1361");
   formsel.options[1]=new Option("电子产品点（涂/灌）胶设备","1651");
   formsel.options[2]=new Option("元器件编带设备","1382");
   formsel.options[3]=new Option("元器件自动插件设备","1371");
   formsel.options[4]=new Option("电子产品焊接设备","1370");
   formsel.options[5]=new Option("电子产品超声波清洗设备","1469");
   formsel.options[6]=new Option("电子产品流水线设备","1364");
   formsel.options[7]=new Option("半导体/集成电路产品线设备","1362");
   formsel.options[8]=new Option("元器件成型/切脚/弯脚设备","1365");
   formsel.options[9]=new Option("元器件老化/筛选/检测设备","1366");
   formsel.options[10]=new Option("电子产品封箱/打包/包装设备","1383");
   formsel.options[11]=new Option("元器件打码设备","1653");
   formsel.options[12]=new Option("其他设备","1368");
      break;
   case "1889":
   formsel.options[0]=new Option("LED点胶机","1890");
   formsel.options[1]=new Option("LED灌胶机","1891");
   formsel.options[2]=new Option("LED扩晶机","1942");
   formsel.options[3]=new Option("LED固晶机","1943");
   formsel.options[4]=new Option("LED焊接机","1944");
   formsel.options[5]=new Option("LED划片机","1945");
   formsel.options[6]=new Option("LED邦定机","1946");
   formsel.options[7]=new Option("LED脱模机","1947");
   formsel.options[8]=new Option("LED切脚机","1948");
   formsel.options[9]=new Option("LED搅拌机","1949");
   formsel.options[10]=new Option("LED荧光粉喷胶机","1950");
   formsel.options[11]=new Option("LED分条机","1951");
   formsel.options[12]=new Option("LED压边机","1952");
   formsel.options[13]=new Option("LED成型机","1953");
   formsel.options[14]=new Option("LED注塑机","1954");
   formsel.options[15]=new Option("LED编带机","1955");
   formsel.options[16]=new Option("LED粘片机","1956");
   formsel.options[17]=new Option("LED外延片/芯片制造设备","1957");
   formsel.options[18]=new Option("LED专用模具","1958");
   formsel.options[19]=new Option("LED载带","1959");
   formsel.options[20]=new Option("LED分光（色）仪/机","1960");
   formsel.options[21]=new Option("芯片自动分选检测仪/机","1961");
   formsel.options[22]=new Option("白光LED 荧光粉测试系统","1962");
   formsel.options[23]=new Option("LED模块/阵列及应用产品的自动在线检测仪/机","1963");
   formsel.options[24]=new Option("紫外辐射/LED 光安全测试设备","1964");
   formsel.options[25]=new Option("LED测试系统","2008");
   formsel.options[26]=new Option("LED光强测试仪","1990");
   formsel.options[27]=new Option("LED光强分布测试仪","1966");
   formsel.options[28]=new Option("白光LED光强/色度分布测试仪","1969");
   formsel.options[29]=new Option("LED光谱测试仪","1992");
   formsel.options[30]=new Option("LED光衰测试仪","1993");
   formsel.options[31]=new Option("LED光色电综合测量(试)系统","1996");
   formsel.options[32]=new Option("LED显示器光电性能测试仪","1972");
   formsel.options[33]=new Option("LED 寿命试验设备","1973");
   formsel.options[34]=new Option("LED可靠性试验设备","1974");
   formsel.options[35]=new Option("LED产品净化工程/防静电","2009");
   formsel.options[36]=new Option("其它LED生产线制造设备","1994");
      break;
   case "1892":
   formsel.options[0]=new Option("V-CUT(开料机)/分(走)板机","1893");
   formsel.options[1]=new Option("倒（圆）角机","1894");
   formsel.options[2]=new Option("多层板热熔机","1895");
   formsel.options[3]=new Option("高速钻孔机","1896");
   formsel.options[4]=new Option("对位冲孔机","1897");
   formsel.options[5]=new Option("半固化片/铜箔冲孔机","1898");
   formsel.options[6]=new Option("孔位成型检查机","1899");
   formsel.options[7]=new Option("激光照排机","1900");
   formsel.options[8]=new Option("激光光绘机","1901");
   formsel.options[9]=new Option("底片检查机","1902");
   formsel.options[10]=new Option("显影机","1903");
   formsel.options[11]=new Option("显影蚀刻连退膜机","1904");
   formsel.options[12]=new Option("制版机","1905");
   formsel.options[13]=new Option("蚀刻机","1907");
   formsel.options[14]=new Option("沉铜机","1908");
   formsel.options[15]=new Option("磨板机","1909");
   formsel.options[16]=new Option("清洗/洗板机","1910");
   formsel.options[17]=new Option("收(吸)板机","1917");
   formsel.options[18]=new Option("翻板机","1919");
   formsel.options[19]=new Option("PCB暂存机","1920");
   formsel.options[20]=new Option("PCB周转车（箱）","1921");
   formsel.options[21]=new Option("真空压机","1922");
   formsel.options[22]=new Option("PCB丝印机","1923");
   formsel.options[23]=new Option("PCB字符喷印机","1924");
   formsel.options[24]=new Option("PCB激光打标机","1925");
   formsel.options[25]=new Option("绿油喷涂机","1926");
   formsel.options[26]=new Option("干膜压膜机","1927");
   formsel.options[27]=new Option("收板机","2016");
   formsel.options[28]=new Option("锣边机","1930");
   formsel.options[29]=new Option("飞针测试机","1931");
   formsel.options[30]=new Option("PCB外观检查机","1935");
   formsel.options[31]=new Option("PCB通用测试机","1936");
   formsel.options[32]=new Option("PCB线宽测量仪","1937");
   formsel.options[33]=new Option("PCB电镀线","1938");
   formsel.options[34]=new Option("PCB烘干线","1939");
   formsel.options[35]=new Option("PCB设备相关配件","1940");
   formsel.options[36]=new Option("PCB设备相关耗材","1941");
      break;
   case "13":
   formsel.options[0]=new Option("科研仪器仪表","154");
   formsel.options[1]=new Option("校验仪器","531");
   formsel.options[2]=new Option("分析仪器","157");
   formsel.options[3]=new Option("自动化仪表","529");
   formsel.options[4]=new Option("光学仪器","158");
   formsel.options[5]=new Option("专用仪器仪表","159");
   formsel.options[6]=new Option("温度仪表","161");
   formsel.options[7]=new Option("测量仪器","530");
   formsel.options[8]=new Option("检测仪器","532");
   formsel.options[9]=new Option("压力仪表","162");
   formsel.options[10]=new Option("阀门仪表","533");
   formsel.options[11]=new Option("流量仪表","163");
   formsel.options[12]=new Option("物位仪表","164");
   formsel.options[13]=new Option("显示仪表","166");
   formsel.options[14]=new Option("控制（调节）仪表","167");
   formsel.options[15]=new Option("电工仪器仪表","175");
   formsel.options[16]=new Option("电子衡器","187");
   formsel.options[17]=new Option("医疗仪器","534");
   formsel.options[18]=new Option("记录仪表","535");
   formsel.options[19]=new Option("仪器仪表零配件","537");
   formsel.options[20]=new Option("其他未分类","189");
      break;
   case "489":
   formsel.options[0]=new Option("电子锡焊材料","527");
   formsel.options[1]=new Option("电子磁性材料","492");
   formsel.options[2]=new Option("半导体晶体材料","510");
   formsel.options[3]=new Option("集成电路封装材料","1485");
   formsel.options[4]=new Option("光电子材料","1484");
   formsel.options[5]=new Option("电子陶瓷材料","494");
   formsel.options[6]=new Option("石英晶体材料","497");
   formsel.options[7]=new Option("PCB基板材料","498");
   formsel.options[8]=new Option("电子金属材料","1662");
   formsel.options[9]=new Option("电子五金配件","493");
   formsel.options[10]=new Option("电磁屏蔽材料","496");
   formsel.options[11]=new Option("电子绝缘材料","491");
   formsel.options[12]=new Option("电子精细化工材料","525");
   formsel.options[13]=new Option("电子产品塑料配件","1661");
   formsel.options[14]=new Option("工程塑料材料","1466");
   formsel.options[15]=new Option("热管理材料","1467");
   formsel.options[16]=new Option("电子轻建纺材料","526");
   formsel.options[17]=new Option("电磁铁","495");
   formsel.options[18]=new Option("其它电子原辅材料","499");
      break;
   case "1416":
   formsel.options[0]=new Option("防静电焊台","1495");
   formsel.options[1]=new Option("防静电手（腕）带","1437");
   formsel.options[2]=new Option("防静电服饰","1438");
   formsel.options[3]=new Option("防静电工作台","1498");
   formsel.options[4]=new Option("防静电桌椅","1439");
   formsel.options[5]=new Option("防静电地板","1440");
   formsel.options[6]=new Option("防静电元件盒","1441");
   formsel.options[7]=new Option("防静电工具箱","1442");
   formsel.options[8]=new Option("防静电周转箱","1443");
   formsel.options[9]=new Option("防静电台垫","1444");
   formsel.options[10]=new Option("离子风棒/风枪/风蛇/风嘴","1445");
   formsel.options[11]=new Option("离子风机/风鼓","1446");
   formsel.options[12]=new Option("离子风帘/风幕","1447");
   formsel.options[13]=new Option("离子网","1461");
   formsel.options[14]=new Option("静电防护管","1448");
   formsel.options[15]=new Option("静电隔离袋","1449");
   formsel.options[16]=new Option("防静电胶粘带","1450");
   formsel.options[17]=new Option("防静电手指套","1451");
   formsel.options[18]=new Option("导电IC泡棉","1452");
   formsel.options[19]=new Option("静电消除剂","1453");
   formsel.options[20]=new Option("静电消除器（棒/机)","1459");
   formsel.options[21]=new Option("静电除尘枪","1460");
   formsel.options[22]=new Option("静电产生器棒","1454");
   formsel.options[23]=new Option("防静电腕带测试器","1455");
   formsel.options[24]=new Option("防静电测试仪器设备","1457");
   formsel.options[25]=new Option("加湿器/湿度控制器","1456");
   formsel.options[26]=new Option("防静电耗材","1464");
   formsel.options[27]=new Option("其它防静电产品","1458");
      break;
   case "508":
   formsel.options[0]=new Option("五金/工具","2307");
      break;
   case "2296":
   formsel.options[0]=new Option("滤波器","2297");
   formsel.options[1]=new Option("功分器","2298");
   formsel.options[2]=new Option("衰减器","2299");
   formsel.options[3]=new Option("偏置电路","2300");
      break;
   case "2311":
   formsel.options[0]=new Option("栅极驱动器","2312");
      break;
   case "509":
   formsel.options[0]=new Option("其他","2306");
break;
}}
function setmain_product(formsel){
 formsel.length=0;
   formsel.options[0]=new Option("集成电路(IC)","2032");
   formsel.options[1]=new Option("电源IC","1372");
   formsel.options[2]=new Option("半导体存储器","1975");
   formsel.options[3]=new Option("二极管","284");
   formsel.options[4]=new Option("三极管","636");
   formsel.options[5]=new Option("场效应管MOSFET","504");
   formsel.options[6]=new Option("可控硅IGBT","552");
   formsel.options[7]=new Option("单片机","1155");
   formsel.options[8]=new Option("电容器","308");
   formsel.options[9]=new Option("电阻器","321");
   formsel.options[10]=new Option("电感器","507");
   formsel.options[11]=new Option("电位器","329");
   formsel.options[12]=new Option("电源/稳压器","506");
   formsel.options[13]=new Option("微调电位器","617");
   formsel.options[14]=new Option("石英晶体器件","638");
   formsel.options[15]=new Option("压电陶瓷元件","637");
   formsel.options[16]=new Option("连接器/接插件","383");
   formsel.options[17]=new Option("开关","411");
   formsel.options[18]=new Option("传感器","471");
   formsel.options[19]=new Option("保险丝","539");
   formsel.options[20]=new Option("放电管","610");
   formsel.options[21]=new Option("普通电池/蓄电池/动力电池","505");
   formsel.options[22]=new Option("变压器","340");
   formsel.options[23]=new Option("变送器","1699");
   formsel.options[24]=new Option("继电器","364");
   formsel.options[25]=new Option("变频器","376");
   formsel.options[26]=new Option("逆变器","500");
   formsel.options[27]=new Option("放大器","501");
   formsel.options[28]=new Option("电声元件","734");
   formsel.options[29]=new Option("电声(扬声器)配件","735");
   formsel.options[30]=new Option("印刷线路板","407");
   formsel.options[31]=new Option("电线电缆","1849");
   formsel.options[32]=new Option("天线","553");
   formsel.options[33]=new Option("光电子/光纤/激光","442");
   formsel.options[34]=new Option("电子调谐器/高频头","771");
   formsel.options[35]=new Option("微特电机","1719");
   formsel.options[36]=new Option("LED","291");
   formsel.options[37]=new Option("显示屏/显示器件/配件","462");
   formsel.options[38]=new Option("电子管/微波磁控管","350");
   formsel.options[39]=new Option("PLC/可编程控制器","1165");
   formsel.options[40]=new Option("编码器","503");
   formsel.options[41]=new Option("安防监控器材","909");
   formsel.options[42]=new Option("IT/电子产品成套件","957");
   formsel.options[43]=new Option("电子测量仪器","981");
   formsel.options[44]=new Option("电子产品试验设备","536");
   formsel.options[45]=new Option("电子产品制造设备","1360");
   formsel.options[46]=new Option("LED生产线制造设备","1889");
   formsel.options[47]=new Option("PCB生产线制造设备","1892");
   formsel.options[48]=new Option("仪器/仪表","13");
   formsel.options[49]=new Option("电子材料","489");
   formsel.options[50]=new Option("防静电产品","1416");
   formsel.options[51]=new Option("五金/工具","508");
   formsel.options[52]=new Option("微波器件","2296");
   formsel.options[53]=new Option("隔离器","2311");
   formsel.options[54]=new Option("其他未分类","509");
}
 function setlast_product(selvalue,formsel){
 formsel.length=0;
   switch(selvalue){ 
    case '': 
    break;
   case "2033":
    break;
   case "2034":
    break;
   case "2035":
    break;
   case "2036":
    break;
   case "2049":
    break;
   case "1405":
    break;
   case "1406":
    break;
   case "1407":
    break;
   case "1408":
    break;
   case "1409":
    break;
   case "1410":
    break;
   case "1411":
    break;
   case "1976":
    break;
   case "1977":
    break;
   case "1978":
    break;
   case "1979":
    break;
   case "1980":
    break;
   case "1981":
    break;
   case "1982":
    break;
   case "1983":
    break;
   case "1984":
    break;
   case "1985":
    break;
   case "1986":
    break;
   case "1987":
    break;
   case "1988":
    break;
   case "1989":
    break;
   case "713":
    break;
   case "286":
    break;
   case "1252":
    break;
   case "290":
    break;
   case "287":
    break;
   case "705":
    break;
   case "712":
    break;
   case "706":
    break;
   case "1779":
    break;
   case "1780":
    break;
   case "1666":
    break;
   case "1286":
    break;
   case "294":
    break;
   case "1781":
    break;
   case "707":
    break;
   case "1241":
    break;
   case "1782":
    break;
   case "285":
    break;
   case "708":
    break;
   case "1783":
    break;
   case "1465":
    break;
   case "293":
    break;
   case "289":
    break;
   case "1784":
    break;
   case "292":
    break;
   case "1239":
    break;
   case "1283":
    break;
   case "1284":
    break;
   case "1240":
    break;
   case "709":
    break;
   case "710":
    break;
   case "711":
    break;
   case "1786":
    break;
   case "1787":
    break;
   case "1788":
    break;
   case "1789":
    break;
   case "1790":
    break;
   case "1791":
    break;
   case "1792":
    break;
   case "892":
    break;
   case "295":
    break;
   case "764":
    break;
   case "765":
    break;
   case "519":
    break;
   case "512":
    break;
   case "768":
    break;
   case "769":
    break;
   case "516":
    break;
   case "766":
    break;
   case "770":
    break;
   case "520":
    break;
   case "518":
    break;
   case "1777":
    break;
   case "767":
    break;
   case "1778":
    break;
   case "521":
    break;
   case "515":
    break;
   case "893":
    break;
   case "522":
    break;
   case "895":
    break;
   case "894":
    break;
   case "1254":
    break;
   case "1255":
    break;
   case "1256":
    break;
   case "1257":
    break;
   case "1258":
    break;
   case "1259":
    break;
   case "1260":
    break;
   case "1261":
    break;
   case "1156":
    break;
   case "1157":
    break;
   case "1158":
    break;
   case "1159":
    break;
   case "1160":
    break;
   case "1161":
    break;
   case "1162":
    break;
   case "1163":
    break;
   case "581":
    break;
   case "867":
    break;
   case "863":
    break;
   case "316":
    break;
   case "865":
    break;
   case "317":
    break;
   case "1767":
    break;
   case "1768":
    break;
   case "1769":
    break;
   case "1770":
    break;
   case "578":
    break;
   case "577":
    break;
   case "579":
    break;
   case "1147":
    break;
   case "567":
    break;
   case "574":
    break;
   case "313":
    break;
   case "575":
    break;
   case "576":
    break;
   case "1664":
    break;
   case "1771":
    break;
   case "1772":
    break;
   case "569":
    break;
   case "570":
    break;
   case "315":
    break;
   case "319":
    break;
   case "311":
    break;
   case "314":
    break;
   case "1148":
    break;
   case "580":
    break;
   case "860":
    break;
   case "861":
    break;
   case "862":
    break;
   case "864":
    break;
   case "1773":
    break;
   case "1774":
    break;
   case "310":
    break;
   case "2046":
    break;
   case "2047":
    break;
   case "1776":
    break;
   case "320":
    break;
   case "594":
    break;
   case "555":
    break;
   case "556":
    break;
   case "857":
    break;
   case "1793":
    break;
   case "1794":
    break;
   case "856":
    break;
   case "557":
    break;
   case "558":
    break;
   case "859":
    break;
   case "559":
    break;
   case "327":
    break;
   case "854":
    break;
   case "714":
    break;
   case "1795":
    break;
   case "1796":
    break;
   case "1797":
    break;
   case "1472":
    break;
   case "1473":
    break;
   case "1474":
    break;
   case "560":
    break;
   case "561":
    break;
   case "562":
    break;
   case "563":
    break;
   case "564":
    break;
   case "1798":
    break;
   case "715":
    break;
   case "1151":
    break;
   case "716":
    break;
   case "565":
    break;
   case "1149":
    break;
   case "855":
    break;
   case "1799":
    break;
   case "858":
    break;
   case "328":
    break;
   case "688":
    break;
   case "687":
    break;
   case "1312":
    break;
   case "689":
    break;
   case "690":
    break;
   case "691":
    break;
   case "692":
    break;
   case "693":
    break;
   case "694":
    break;
   case "695":
    break;
   case "696":
    break;
   case "1164":
    break;
   case "1244":
    break;
   case "697":
    break;
   case "330":
    break;
   case "331":
    break;
   case "1292":
    break;
   case "332":
    break;
   case "333":
    break;
   case "334":
    break;
   case "335":
    break;
   case "336":
    break;
   case "337":
    break;
   case "595":
    break;
   case "596":
    break;
   case "597":
    break;
   case "598":
    break;
   case "599":
    break;
   case "339":
    break;
   case "837":
    break;
   case "834":
    break;
   case "842":
    break;
   case "1748":
    break;
   case "1314":
    break;
   case "841":
    break;
   case "832":
    break;
   case "833":
    break;
   case "850":
    break;
   case "835":
    break;
   case "836":
    break;
   case "851":
    break;
   case "838":
    break;
   case "843":
    break;
   case "844":
    break;
   case "845":
    break;
   case "1315":
    break;
   case "846":
    break;
   case "840":
    break;
   case "839":
    break;
   case "848":
    break;
   case "847":
    break;
   case "849":
    break;
   case "853":
    break;
   case "852":
    break;
   case "621":
    break;
   case "618":
    break;
   case "619":
    break;
   case "620":
    break;
   case "622":
    break;
   case "623":
    break;
   case "645":
    break;
   case "644":
    break;
   case "647":
    break;
   case "648":
    break;
   case "649":
    break;
   case "646":
   formsel.options[0]=new Option("声表面滤波器","651");
   formsel.options[1]=new Option("声表面振荡器","652");
   formsel.options[2]=new Option("声表面谐振器","653");
   formsel.options[3]=new Option("其他声表面器件","654");
    break;
   case "650":
    break;
   case "639":
    break;
   case "640":
    break;
   case "641":
    break;
   case "642":
    break;
   case "1249":
    break;
   case "643":
    break;
   case "776":
    break;
   case "777":
   formsel.options[0]=new Option("圆形连接器-外壳","2189");
   formsel.options[1]=new Option("圆形连接器-电缆夹","2190");
   formsel.options[2]=new Option("圆形连接器-触芯、触头","2191");
   formsel.options[3]=new Option("圆形连接器-适配器","2192");
   formsel.options[4]=new Option("圆形连接器-配件","2193");
   formsel.options[5]=new Option("圆形连接器-电缆密封","2194");
   formsel.options[6]=new Option("MIL规格圆形连接器","2195");
   formsel.options[7]=new Option("圆形连接器-嵌芯","2196");
    break;
   case "778":
   formsel.options[0]=new Option("矩形连接器-弹簧式","2197");
   formsel.options[1]=new Option("矩形连接器-板垫片、叠接器（板对板）","2198");
   formsel.options[2]=new Option("矩形连接器-板载、直接线对板","2199");
   formsel.options[3]=new Option("矩形连接器-自由悬挂、面板安装","2200");
   formsel.options[4]=new Option("矩形连接器-针座专用引脚","2201");
   formsel.options[5]=new Option("矩形连接器-针座公插针","2202");
   formsel.options[6]=new Option("矩形连接器-针座插座、母插口","2203");
   formsel.options[7]=new Option("矩形连接器-阵列、边缘型、夹层式（板对板）","2204");
    break;
   case "779":
   formsel.options[0]=new Option("射频连接器-端接器","2205");
   formsel.options[1]=new Option("射频连接器-触头","2206");
   formsel.options[2]=new Option("射频连接器-适配器","2207");
   formsel.options[3]=new Option("射频连接器-配件","2208");
    break;
   case "780":
    break;
   case "781":
    break;
   case "1817":
    break;
   case "1818":
    break;
   case "782":
   formsel.options[0]=new Option("FFC/FPC（扁平柔性）连接器","2209");
   formsel.options[1]=new Option("FFC/FPC（扁平柔性）连接器-外壳","2210");
   formsel.options[2]=new Option("FFC/FPC（扁平柔性）连接器-触头","2211");
   formsel.options[3]=new Option("FFC/FPC（扁平柔性）连接器-配件","2212");
    break;
   case "1819":
    break;
   case "783":
    break;
   case "784":
    break;
   case "1820":
   formsel.options[0]=new Option("USB连接器-适配器","2213");
   formsel.options[1]=new Option("USB连接器-配件","2214");
   formsel.options[2]=new Option("可堆叠USB连接器","2215");
   formsel.options[3]=new Option("密封USB连接器","2216");
    break;
   case "1821":
   formsel.options[0]=new Option("HDMI连接器-适配器","2217");
   formsel.options[1]=new Option("HDMI连接器-配件","2218");
    break;
   case "1822":
   formsel.options[0]=new Option("D-SUB、D形连接器-后壳、罩","2219");
   formsel.options[1]=new Option("D-SUB连接器后盖","2220");
   formsel.options[2]=new Option("D-SUB、D形连接器-外壳","2221");
   formsel.options[3]=new Option("D-SUB、D形连接器-端接器","2222");
   formsel.options[4]=new Option("D-SUB、D形连接器-触头","2223");
   formsel.options[5]=new Option("D-SUB、D形连接器-触芯","2224");
   formsel.options[6]=new Option("D-SUB、D形连接器适配器","2225");
   formsel.options[7]=new Option("D-SUB、D形连接器配件","2226");
   formsel.options[8]=new Option("D-SUB、D形连接器配件顶丝","2227");
   formsel.options[9]=new Option("D-SUB连接器-环箍","2228");
   formsel.options[10]=new Option("D-SUB连接器-螺丝锁、滑锁","2229");
   formsel.options[11]=new Option("D-SUB连接器-锁紧螺丝","2230");
   formsel.options[12]=new Option("D-SUB连接器-应力消除夹","2231");
   formsel.options[13]=new Option("D-SUB连接器-组合布局","2232");
   formsel.options[14]=new Option("可堆叠D-SUB连接器","2233");
    break;
   case "785":
    break;
   case "786":
    break;
   case "787":
    break;
   case "789":
   formsel.options[0]=new Option("汽车连接器触点","2234");
   formsel.options[1]=new Option("汽车连接器附件","2235");
   formsel.options[2]=new Option("汽车连接器外壳","2236");
    break;
   case "791":
    break;
   case "1823":
    break;
   case "1824":
    break;
   case "1825":
   formsel.options[0]=new Option("传感器-分配器","2237");
   formsel.options[1]=new Option("传感器连接器-附件","2238");
   formsel.options[2]=new Option("传感器连接器-嵌芯","2239");
   formsel.options[3]=new Option("传感器连接器-外壳","2240");
   formsel.options[4]=new Option("传感器配电箱","2241");
   formsel.options[5]=new Option("传感器线缆组件","2242");
    break;
   case "1826":
    break;
   case "1827":
    break;
   case "792":
   formsel.options[0]=new Option("光纤连接器-外壳","2243");
   formsel.options[1]=new Option("光纤连接器-适配器","2244");
   formsel.options[2]=new Option("光纤连接器-配件","2245");
    break;
   case "790":
    break;
   case "794":
    break;
   case "795":
    break;
   case "788":
    break;
   case "1828":
    break;
   case "1829":
    break;
   case "1830":
    break;
   case "1831":
    break;
   case "793":
    break;
   case "1832":
   formsel.options[0]=new Option("背板连接器-专用","2246");
   formsel.options[1]=new Option("背板连接器-外壳","2247");
   formsel.options[2]=new Option("背板连接器-触头","2248");
   formsel.options[3]=new Option("背板连接器-配件","2249");
   formsel.options[4]=new Option("背板连接器-ARINC","2250");
   formsel.options[5]=new Option("背板连接器-ARINC插件","2251");
   formsel.options[6]=new Option("背板连接器-Hard","2252");
   formsel.options[7]=new Option("背板连接器-DIN41612","2253");
    break;
   case "1833":
    break;
   case "1834":
    break;
   case "389":
    break;
   case "390":
    break;
   case "1835":
   formsel.options[0]=new Option("接线座-接头、插头、插口","2254");
   formsel.options[1]=new Option("接线座-配件","2255");
   formsel.options[2]=new Option("接线座配件-导线金属环","2256");
   formsel.options[3]=new Option("接线座配件-标记条","2257");
   formsel.options[4]=new Option("接线座配件-跳线","2258");
   formsel.options[5]=new Option("接线座-配电","2259");
   formsel.options[6]=new Option("接线座-隔板块","2260");
   formsel.options[7]=new Option("接线座-Din轨道、通道","2261");
    break;
   case "1836":
   formsel.options[0]=new Option("接线条和转动板","2262");
    break;
   case "392":
   formsel.options[0]=new Option("IC插座-晶体管","2263");
   formsel.options[1]=new Option("IC插座-晶体管适配器","2264");
   formsel.options[2]=new Option("IC插座-晶体管配件","2265");
    break;
   case "395":
    break;
   case "398":
   formsel.options[0]=new Option("接线端子","2023");
   formsel.options[1]=new Option("冷压端子","2024");
   formsel.options[2]=new Option("绝缘端子","2025");
   formsel.options[3]=new Option("弹簧式端子","2026");
   formsel.options[4]=new Option("螺钉式端子","2027");
   formsel.options[5]=new Option("免螺丝式端子","2028");
   formsel.options[6]=new Option("栅栏式端子","2029");
   formsel.options[7]=new Option("贯通式端子","2030");
   formsel.options[8]=new Option("插拔式端子","2031");
   formsel.options[9]=new Option("DIN轨端子块","2266");
   formsel.options[10]=new Option("保险丝接线端子","2267");
   formsel.options[11]=new Option("端子-线对板连接器、线对板接线端子","2268");
   formsel.options[12]=new Option("端子-刀式连接器","2269");
   formsel.options[13]=new Option("端子-快速连接、快速断开连接器","2270");
   formsel.options[14]=new Option("端子-焊片连接器","2271");
   formsel.options[15]=new Option("端子-环形连接器","2272");
   formsel.options[16]=new Option("端子-电线引脚连接器","2273");
   formsel.options[17]=new Option("端子-电线接头连接器","2274");
   formsel.options[18]=new Option("端子-矩形连接器","2275");
   formsel.options[19]=new Option("端子-磁线连接器","2276");
   formsel.options[20]=new Option("端子-箔片连接器","2277");
   formsel.options[21]=new Option("端子-转塔连接器","2278");
   formsel.options[22]=new Option("端子-铲形连接器","2279");
   formsel.options[23]=new Option("端子-PC引脚插座、插座连接器","2280");
   formsel.options[24]=new Option("端子-PC引脚、单接线柱连接器","2281");
   formsel.options[25]=new Option("端子接线盒系统","2282");
   formsel.options[26]=new Option("端子-套管、子弹式连接器","2283");
   formsel.options[27]=new Option("端子-适配器","2284");
   formsel.options[28]=new Option("端子-配件","2285");
   formsel.options[29]=new Option("端子-外壳、套","2286");
    break;
   case "1837":
    break;
   case "1838":
    break;
   case "1839":
    break;
   case "1840":
    break;
   case "1841":
    break;
   case "1842":
    break;
   case "1843":
    break;
   case "1844":
    break;
   case "1845":
    break;
   case "1846":
    break;
   case "1847":
    break;
   case "394":
    break;
   case "393":
    break;
   case "396":
    break;
   case "2174":
   formsel.options[0]=new Option("光伏连接器-触头","2175");
   formsel.options[1]=new Option("光伏连接器-配件","2176");
    break;
   case "2177":
    break;
   case "2178":
    break;
   case "2179":
   formsel.options[0]=new Option("套管-电源连接器","2180");
   formsel.options[1]=new Option("套管-配件","2181");
   formsel.options[2]=new Option("套管-音频连接器","2182");
   formsel.options[3]=new Option("套管-音频适配器","2183");
    break;
   case "2184":
   formsel.options[0]=new Option("存储器连接器-直列式模块插座","2185");
   formsel.options[1]=new Option("存储器连接器-配件","2186");
   formsel.options[2]=new Option("存储器连接器-PC卡适配器","2187");
   formsel.options[3]=new Option("存储器连接器-PC卡插槽","2188");
    break;
   case "2287":
   formsel.options[0]=new Option("重载外壳、盖罩、基底","2288");
   formsel.options[1]=new Option("重载连接器-触芯","2289");
   formsel.options[2]=new Option("重载连接器-适配器","2290");
   formsel.options[3]=new Option("重载连接器-配件","2291");
   formsel.options[4]=new Option("重载连接器-插件、模块","2292");
   formsel.options[5]=new Option("重载连接器-框架","2293");
   formsel.options[6]=new Option("重载连接器-组件","2294");
   formsel.options[7]=new Option("重载电缆压盖","2295");
    break;
   case "429":
    break;
   case "413":
    break;
   case "1391":
    break;
   case "1390":
    break;
   case "433":
    break;
   case "2019":
    break;
   case "419":
    break;
   case "416":
    break;
   case "1697":
    break;
   case "430":
    break;
   case "2020":
    break;
   case "2017":
    break;
   case "655":
    break;
   case "424":
    break;
   case "425":
    break;
   case "1262":
    break;
   case "437":
    break;
   case "440":
    break;
   case "421":
    break;
   case "1229":
    break;
   case "1230":
    break;
   case "439":
    break;
   case "435":
    break;
   case "656":
    break;
   case "657":
    break;
   case "427":
    break;
   case "658":
    break;
   case "659":
    break;
   case "665":
    break;
   case "412":
    break;
   case "422":
    break;
   case "661":
    break;
   case "663":
    break;
   case "662":
    break;
   case "441":
    break;
   case "428":
    break;
   case "434":
    break;
   case "415":
    break;
   case "667":
    break;
   case "664":
    break;
   case "660":
    break;
   case "417":
    break;
   case "1375":
    break;
   case "668":
    break;
   case "669":
    break;
   case "1269":
    break;
   case "670":
    break;
   case "1303":
    break;
   case "671":
    break;
   case "672":
    break;
   case "1698":
    break;
   case "432":
    break;
   case "673":
    break;
   case "674":
    break;
   case "675":
    break;
   case "1374":
    break;
   case "1231":
    break;
   case "1232":
    break;
   case "1233":
    break;
   case "1234":
    break;
   case "1235":
    break;
   case "1236":
    break;
   case "1280":
    break;
   case "1237":
    break;
   case "1271":
    break;
   case "1272":
    break;
   case "1274":
    break;
   case "1275":
    break;
   case "1276":
    break;
   case "1297":
    break;
   case "1273":
    break;
   case "2018":
    break;
   case "1296":
    break;
   case "1298":
    break;
   case "1299":
    break;
   case "1301":
    break;
   case "1302":
    break;
   case "2308":
    break;
   case "2309":
    break;
   case "677":
    break;
   case "478":
   formsel.options[0]=new Option("凹槽型光电传感器","1739");
   formsel.options[1]=new Option("反射型光电传感器","1740");
   formsel.options[2]=new Option("分离型光电传感器","1741");
   formsel.options[3]=new Option("塑胶弓型光电传感器","1742");
   formsel.options[4]=new Option("棱镜型光电传感器","1743");
    break;
   case "1805":
    break;
   case "473":
    break;
   case "1806":
    break;
   case "717":
    break;
   case "1807":
    break;
   case "733":
    break;
   case "1304":
    break;
   case "1486":
    break;
   case "1808":
    break;
   case "727":
    break;
   case "472":
    break;
   case "1809":
    break;
   case "475":
    break;
   case "474":
    break;
   case "1263":
    break;
   case "485":
    break;
   case "718":
    break;
   case "719":
    break;
   case "481":
    break;
   case "1810":
    break;
   case "1811":
    break;
   case "720":
    break;
   case "484":
    break;
   case "1812":
    break;
   case "479":
    break;
   case "480":
    break;
   case "1813":
    break;
   case "483":
    break;
   case "1746":
    break;
   case "1747":
    break;
   case "1848":
    break;
   case "487":
    break;
   case "721":
    break;
   case "722":
    break;
   case "723":
    break;
   case "724":
    break;
   case "725":
    break;
   case "1195":
    break;
   case "1196":
    break;
   case "1814":
    break;
   case "1197":
    break;
   case "1198":
    break;
   case "1713":
    break;
   case "1199":
    break;
   case "1200":
    break;
   case "1201":
    break;
   case "1488":
    break;
   case "1489":
    break;
   case "1490":
    break;
   case "728":
    break;
   case "1491":
    break;
   case "1493":
    break;
   case "1815":
    break;
   case "1816":
    break;
   case "1487":
    break;
   case "1492":
    break;
   case "726":
    break;
   case "2310":
    break;
   case "488":
    break;
   case "540":
    break;
   case "545":
    break;
   case "549":
    break;
   case "544":
    break;
   case "547":
    break;
   case "606":
    break;
   case "607":
    break;
   case "608":
    break;
   case "609":
    break;
   case "548":
    break;
   case "550":
    break;
   case "611":
    break;
   case "612":
    break;
   case "613":
    break;
   case "614":
    break;
   case "616":
    break;
   case "615":
    break;
   case "1671":
    break;
   case "1685":
    break;
   case "1670":
    break;
   case "1687":
    break;
   case "1669":
    break;
   case "1668":
    break;
   case "1672":
    break;
   case "1673":
    break;
   case "1674":
    break;
   case "1766":
    break;
   case "1681":
    break;
   case "1755":
    break;
   case "1683":
    break;
   case "1678":
    break;
   case "1679":
    break;
   case "1680":
    break;
   case "1684":
    break;
   case "1756":
    break;
   case "2021":
    break;
   case "2022":
    break;
   case "1757":
    break;
   case "1758":
    break;
   case "1759":
    break;
   case "1760":
    break;
   case "1761":
    break;
   case "1762":
    break;
   case "1763":
    break;
   case "1764":
    break;
   case "1765":
    break;
   case "1688":
    break;
   case "1689":
    break;
   case "868":
    break;
   case "869":
    break;
   case "870":
    break;
   case "871":
    break;
   case "872":
    break;
   case "873":
    break;
   case "874":
    break;
   case "875":
    break;
   case "876":
    break;
   case "877":
    break;
   case "878":
    break;
   case "879":
    break;
   case "880":
    break;
   case "881":
    break;
   case "882":
    break;
   case "883":
    break;
   case "884":
    break;
   case "2037":
    break;
   case "2038":
    break;
   case "2039":
    break;
   case "2040":
    break;
   case "2041":
    break;
   case "2042":
    break;
   case "2043":
    break;
   case "885":
    break;
   case "886":
    break;
   case "887":
    break;
   case "888":
    break;
   case "890":
    break;
   case "891":
    break;
   case "2045":
    break;
   case "1700":
    break;
   case "1701":
    break;
   case "1702":
    break;
   case "1703":
    break;
   case "1704":
    break;
   case "1705":
    break;
   case "1706":
    break;
   case "1707":
    break;
   case "1708":
    break;
   case "1709":
    break;
   case "1710":
    break;
   case "1711":
    break;
   case "1712":
    break;
   case "365":
    break;
   case "1749":
    break;
   case "680":
    break;
   case "730":
    break;
   case "366":
    break;
   case "367":
    break;
   case "368":
    break;
   case "678":
    break;
   case "372":
    break;
   case "371":
    break;
   case "681":
    break;
   case "369":
    break;
   case "373":
    break;
   case "1750":
    break;
   case "686":
    break;
   case "679":
    break;
   case "732":
    break;
   case "685":
    break;
   case "1190":
    break;
   case "1191":
    break;
   case "1192":
    break;
   case "1193":
    break;
   case "1194":
    break;
   case "1238":
    break;
   case "1751":
    break;
   case "1752":
    break;
   case "1753":
    break;
   case "684":
    break;
   case "683":
    break;
   case "729":
    break;
   case "1665":
    break;
   case "682":
    break;
   case "1754":
    break;
   case "1278":
    break;
   case "375":
    break;
   case "377":
    break;
   case "378":
    break;
   case "379":
    break;
   case "380":
    break;
   case "381":
    break;
   case "382":
    break;
   case "1715":
    break;
   case "1716":
    break;
   case "1717":
    break;
   case "1718":
    break;
   case "2051":
    break;
   case "736":
    break;
   case "737":
    break;
   case "738":
    break;
   case "741":
    break;
   case "739":
    break;
   case "740":
    break;
   case "742":
    break;
   case "743":
    break;
   case "1277":
    break;
   case "744":
    break;
   case "745":
    break;
   case "746":
    break;
   case "747":
    break;
   case "748":
    break;
   case "749":
    break;
   case "750":
    break;
   case "751":
    break;
   case "752":
    break;
   case "1435":
    break;
   case "1436":
    break;
   case "753":
    break;
   case "754":
    break;
   case "948":
    break;
   case "755":
    break;
   case "756":
    break;
   case "949":
    break;
   case "950":
    break;
   case "951":
    break;
   case "952":
    break;
   case "953":
    break;
   case "954":
    break;
   case "955":
    break;
   case "956":
    break;
   case "698":
    break;
   case "699":
    break;
   case "1242":
    break;
   case "1243":
    break;
   case "700":
    break;
   case "701":
    break;
   case "702":
    break;
   case "703":
    break;
   case "704":
    break;
   case "410":
    break;
   case "1850":
    break;
   case "1851":
    break;
   case "1852":
    break;
   case "1853":
    break;
   case "1854":
    break;
   case "1855":
    break;
   case "1856":
    break;
   case "1857":
    break;
   case "1858":
    break;
   case "1859":
    break;
   case "1860":
    break;
   case "1861":
    break;
   case "1862":
    break;
   case "1863":
    break;
   case "1864":
    break;
   case "1865":
    break;
   case "1866":
    break;
   case "1867":
    break;
   case "1868":
    break;
   case "1869":
    break;
   case "1870":
    break;
   case "1871":
    break;
   case "1872":
    break;
   case "1873":
    break;
   case "1874":
    break;
   case "1875":
    break;
   case "1876":
    break;
   case "1877":
    break;
   case "1878":
    break;
   case "1879":
    break;
   case "1880":
    break;
   case "1881":
    break;
   case "1882":
    break;
   case "1883":
    break;
   case "1884":
    break;
   case "1885":
    break;
   case "1886":
    break;
   case "1887":
    break;
   case "897":
    break;
   case "899":
    break;
   case "900":
    break;
   case "902":
    break;
   case "903":
    break;
   case "904":
    break;
   case "905":
    break;
   case "906":
    break;
   case "907":
    break;
   case "446":
    break;
   case "447":
    break;
   case "1281":
    break;
   case "448":
    break;
   case "1288":
    break;
   case "449":
    break;
   case "450":
    break;
   case "451":
    break;
   case "452":
    break;
   case "453":
    break;
   case "1289":
    break;
   case "454":
    break;
   case "1287":
    break;
   case "455":
    break;
   case "456":
    break;
   case "1285":
    break;
   case "457":
    break;
   case "1270":
    break;
   case "458":
    break;
   case "1290":
    break;
   case "1282":
    break;
   case "459":
    break;
   case "1268":
    break;
   case "445":
    break;
   case "460":
    break;
   case "461":
    break;
   case "772":
    break;
   case "773":
    break;
   case "774":
    break;
   case "1720":
    break;
   case "1721":
    break;
   case "1722":
    break;
   case "1723":
    break;
   case "1724":
    break;
   case "1725":
    break;
   case "1726":
    break;
   case "1727":
    break;
   case "1728":
    break;
   case "1729":
    break;
   case "1730":
    break;
   case "1731":
    break;
   case "1732":
    break;
   case "1575":
   formsel.options[0]=new Option("贴片LED","1398");
   formsel.options[1]=new Option("普通LED","1392");
   formsel.options[2]=new Option("微型/小蝴蝶LED","1499");
   formsel.options[3]=new Option("红外LED","1642");
   formsel.options[4]=new Option("紫外LED","1643");
   formsel.options[5]=new Option("双色LED","1393");
   formsel.options[6]=new Option("全彩LED","1394");
   formsel.options[7]=new Option("超高亮LED","1395");
   formsel.options[8]=new Option("大功率LED","1396");
   formsel.options[9]=new Option("食人鱼LED","1397");
   formsel.options[10]=new Option("LED点阵","1399");
   formsel.options[11]=new Option("LED数码管","465");
   formsel.options[12]=new Option("LED光柱","1400");
   formsel.options[13]=new Option("其它","1641");
    break;
   case "1420":
   formsel.options[0]=new Option("LED灯泡（室内型）","1501");
   formsel.options[1]=new Option("LED日光灯","1502");
   formsel.options[2]=new Option("LED室内照明模块","1503");
   formsel.options[3]=new Option("LED台灯","1504");
   formsel.options[4]=new Option("LED吸顶灯","1505");
   formsel.options[5]=new Option("LED壁灯","1506");
   formsel.options[6]=new Option("LED吊灯","1507");
   formsel.options[7]=new Option("LED投光灯","1508");
   formsel.options[8]=new Option("LED射灯","1509");
   formsel.options[9]=new Option("LED小夜灯","1510");
   formsel.options[10]=new Option("LED平面灯","1511");
   formsel.options[11]=new Option("其它","1512");
    break;
   case "1421":
   formsel.options[0]=new Option("LED灯泡（户外型）","1513");
   formsel.options[1]=new Option("LED户外照明模块","1514");
   formsel.options[2]=new Option("LED路灯","1515");
   formsel.options[3]=new Option("LED幕（洗）墙灯","1516");
   formsel.options[4]=new Option("LED地砖灯","1517");
   formsel.options[5]=new Option("LED草坪灯","1518");
   formsel.options[6]=new Option("LED地埋灯","1519");
   formsel.options[7]=new Option("LED水底灯","1520");
   formsel.options[8]=new Option("LED杯灯","1521");
   formsel.options[9]=new Option("LED户外射灯","1522");
   formsel.options[10]=new Option("LED轮廓灯","1523");
   formsel.options[11]=new Option("LED像素灯","1524");
   formsel.options[12]=new Option("LED泛光灯","1525");
   formsel.options[13]=new Option("其它","1526");
    break;
   case "1422":
   formsel.options[0]=new Option("LED手电筒","1527");
   formsel.options[1]=new Option("LED应急灯","1528");
   formsel.options[2]=new Option("LED手摇灯","1529");
   formsel.options[3]=new Option("LED矿灯","1530");
   formsel.options[4]=new Option("LED头灯","1531");
   formsel.options[5]=new Option("LED舞台灯","1532");
   formsel.options[6]=new Option("LED自行车灯","1533");
   formsel.options[7]=new Option("LED露营灯","1534");
   formsel.options[8]=new Option("LED闪光灯","1535");
   formsel.options[9]=new Option("LED标识灯","1667");
   formsel.options[10]=new Option("其它","1536");
    break;
   case "1494":
   formsel.options[0]=new Option("LED点光源","1537");
   formsel.options[1]=new Option("LED灯条","1538");
   formsel.options[2]=new Option("LED灯带","1640");
   formsel.options[3]=new Option("LED灯珠","1539");
   formsel.options[4]=new Option("LED灯串","1540");
   formsel.options[5]=new Option("LED星星灯","1541");
   formsel.options[6]=new Option("LED柔性光条","1542");
   formsel.options[7]=new Option("LED流星灯","1543");
   formsel.options[8]=new Option("LED瀑布灯","1544");
   formsel.options[9]=new Option("LED彩虹管","1545");
   formsel.options[10]=new Option("LED网灯（灯墙）","1546");
   formsel.options[11]=new Option("LED发光砖","1547");
   formsel.options[12]=new Option("LED树灯","1548");
   formsel.options[13]=new Option("LED护栏灯","1549");
   formsel.options[14]=new Option("LED圣诞灯","1550");
   formsel.options[15]=new Option("LED音乐灯","1551");
   formsel.options[16]=new Option("LED光纤灯","1552");
   formsel.options[17]=new Option("LED广告模组","1645");
   formsel.options[18]=new Option("其它","1553");
    break;
   case "1470":
   formsel.options[0]=new Option("LED车内照明灯","1559");
   formsel.options[1]=new Option("LED刹车灯","1560");
   formsel.options[2]=new Option("LED转向灯","1561");
   formsel.options[3]=new Option("LED倒车灯","1562");
   formsel.options[4]=new Option("LED仪表灯","1563");
   formsel.options[5]=new Option("LED车顶灯","1564");
   formsel.options[6]=new Option("LED装饰灯","1565");
   formsel.options[7]=new Option("LED汽车尾灯","1566");
   formsel.options[8]=new Option("LED汽车前灯","1567");
   formsel.options[9]=new Option("LED指示灯","1568");
   formsel.options[10]=new Option("LED底盘灯","1569");
   formsel.options[11]=new Option("LED侧灯","1570");
   formsel.options[12]=new Option("其它","1571");
    break;
   case "1424":
   formsel.options[0]=new Option("桥梁LED工程","1554");
   formsel.options[1]=new Option("道路LED工程","1555");
   formsel.options[2]=new Option("景观LED工程","1556");
   formsel.options[3]=new Option("隧道LED工程","1557");
   formsel.options[4]=new Option("其它","1558");
    break;
   case "830":
   formsel.options[0]=new Option("单色LED显示屏（模组）","1572");
   formsel.options[1]=new Option("双色LED显示屏（模组）","1573");
   formsel.options[2]=new Option("全彩LED显示屏（模组）","1574");
   formsel.options[3]=new Option("LED交通信号标志屏（模组）","1580");
   formsel.options[4]=new Option("其它","1576");
    break;
   case "1418":
   formsel.options[0]=new Option("侧光式LED背光源","1577");
   formsel.options[1]=new Option("直下式LED背光源","1578");
   formsel.options[2]=new Option("LED背光驱动板","1654");
   formsel.options[3]=new Option("其它","1579");
    break;
   case "1581":
   formsel.options[0]=new Option("OLED显示屏","1582");
   formsel.options[1]=new Option("EL冷光片","1583");
   formsel.options[2]=new Option("其它","1584");
    break;
   case "1402":
   formsel.options[0]=new Option("LED外延片","1585");
   formsel.options[1]=new Option("LED芯片","1586");
   formsel.options[2]=new Option("其它","1587");
    break;
   case "1588":
   formsel.options[0]=new Option("LED驱动电源/模块","1589");
   formsel.options[1]=new Option("LED控制器/系统","1590");
   formsel.options[2]=new Option("LED解码驱动器","1591");
   formsel.options[3]=new Option("其它","1592");
    break;
   case "1593":
   formsel.options[0]=new Option("LED荧光粉","1594");
   formsel.options[1]=new Option("LED封装胶","1595");
   formsel.options[2]=new Option("LED基板","1596");
   formsel.options[3]=new Option("LED支架","1417");
   formsel.options[4]=new Option("LED料盒","1597");
   formsel.options[5]=new Option("LED钢嘴/瓷嘴","1598");
   formsel.options[6]=new Option("LED环氧树脂扩散剂","1599");
   formsel.options[7]=new Option("LED导电银胶","1600");
   formsel.options[8]=new Option("其它","1601");
    break;
   case "1636":
    break;
   case "1637":
    break;
   case "464":
    break;
   case "816":
    break;
   case "818":
    break;
   case "819":
    break;
   case "820":
    break;
   case "821":
    break;
   case "822":
    break;
   case "831":
    break;
   case "823":
    break;
   case "824":
    break;
   case "825":
    break;
   case "1475":
    break;
   case "826":
    break;
   case "827":
    break;
   case "469":
    break;
   case "828":
    break;
   case "1178":
    break;
   case "1425":
    break;
   case "1426":
    break;
   case "1427":
    break;
   case "1428":
    break;
   case "470":
    break;
   case "1648":
    break;
   case "1649":
    break;
   case "1650":
    break;
   case "1412":
    break;
   case "1413":
    break;
   case "1414":
    break;
   case "1415":
    break;
   case "910":
   formsel.options[0]=new Option("视频监控系统","914");
   formsel.options[1]=new Option("集成监控系统","915");
   formsel.options[2]=new Option("监控摄像机","916");
   formsel.options[3]=new Option("视频卡/编码器","917");
   formsel.options[4]=new Option("纪录设备","918");
   formsel.options[5]=new Option("画面处理器","919");
   formsel.options[6]=new Option("云台","920");
   formsel.options[7]=new Option("硬盘录像机","921");
   formsel.options[8]=new Option("配件","922");
   formsel.options[9]=new Option("镜头","923");
   formsel.options[10]=new Option("其他未分类","947");
    break;
   case "911":
   formsel.options[0]=new Option("电话报警设备","924");
   formsel.options[1]=new Option("集成防盗报警系统","925");
   formsel.options[2]=new Option("EAS防盗（电磁波/射频）","926");
   formsel.options[3]=new Option("报警器材系统","927");
   formsel.options[4]=new Option("其他防盗器材","928");
    break;
   case "912":
   formsel.options[0]=new Option("对讲系统","929");
   formsel.options[1]=new Option("可视对讲","930");
   formsel.options[2]=new Option("对讲设备","931");
   formsel.options[3]=new Option("非可视对讲","932");
    break;
   case "933":
   formsel.options[0]=new Option("读卡器","934");
   formsel.options[1]=new Option("门禁控制主机","935");
   formsel.options[2]=new Option("指纹采集仪","936");
   formsel.options[3]=new Option("考勤设备","937");
   formsel.options[4]=new Option("门禁设备","938");
    break;
   case "913":
   formsel.options[0]=new Option("微波传输","939");
   formsel.options[1]=new Option("远程传输","940");
   formsel.options[2]=new Option("光纤传输","941");
   formsel.options[3]=new Option("线缆","942");
   formsel.options[4]=new Option("电缆","943");
   formsel.options[5]=new Option("光缆","944");
   formsel.options[6]=new Option("光端机","945");
   formsel.options[7]=new Option("其他","946");
    break;
   case "2010":
   formsel.options[0]=new Option("OEM/ODM产品加工","2015");
    break;
   case "1376":
   formsel.options[0]=new Option("产品设计解决方案","1377");
   formsel.options[1]=new Option("成套外(机)壳/结构件","1378");
   formsel.options[2]=new Option("成套产品商品模具","1379");
   formsel.options[3]=new Option("成套CKD/SKD散(组)件","1380");
   formsel.options[4]=new Option("OEM/ODM产品加工","1381");
    break;
   case "958":
   formsel.options[0]=new Option("产品设计解决方案","1015");
   formsel.options[1]=new Option("成套外(机)壳/结构件","1016");
   formsel.options[2]=new Option("成套产品商品模具","1017");
   formsel.options[3]=new Option("成套CKD/SKD散(组)件","1018");
   formsel.options[4]=new Option("OEM/ODM产品加工","1019");
    break;
   case "1247":
   formsel.options[0]=new Option("产品设计解决方案","1323");
   formsel.options[1]=new Option("成套外(机)壳/结构件","1324");
   formsel.options[2]=new Option("成套产品商品模具","1325");
   formsel.options[3]=new Option("OEM/ODM产品加工","1327");
    break;
   case "1655":
   formsel.options[0]=new Option("产品设计解决方案","1656");
   formsel.options[1]=new Option("成套外(机)壳/结构件","1657");
   formsel.options[2]=new Option("成套产品商品模具","1658");
   formsel.options[3]=new Option("成套CKD/SKD散(组)件","1659");
   formsel.options[4]=new Option("OEM/ODM产品加工","1660");
    break;
   case "1691":
   formsel.options[0]=new Option("产品设计解决方案","1692");
   formsel.options[1]=new Option("成套外(机)壳/结构件","1693");
   formsel.options[2]=new Option("成套产品商品模具","1694");
   formsel.options[3]=new Option("成套CKD/SKD散(组)件","1695");
   formsel.options[4]=new Option("成套CKD/SKD散(组)件","1696");
    break;
   case "973":
   formsel.options[0]=new Option("产品设计解决方案","1095");
   formsel.options[1]=new Option("成套外(机)壳/结构件","1096");
   formsel.options[2]=new Option("成套产品商品模具","1097");
   formsel.options[3]=new Option("成套CKD/SKD散(组)件","1098");
   formsel.options[4]=new Option("OEM/ODM产品加工","1099");
    break;
   case "1429":
   formsel.options[0]=new Option("产品设计解决方案","1430");
   formsel.options[1]=new Option("成套外(机)壳/结构件","1431");
   formsel.options[2]=new Option("成套产品商品模具","1432");
   formsel.options[3]=new Option("成套CKD/SKD散(组)件","1433");
   formsel.options[4]=new Option("成套CKD/SKD散(组)件","1434");
    break;
   case "959":
   formsel.options[0]=new Option("产品设计解决方案","1020");
   formsel.options[1]=new Option("成套外(机)壳/结构件","1021");
   formsel.options[2]=new Option("成套产品商品模具","1022");
   formsel.options[3]=new Option("成套CKD/SKD散(组)件","1023");
   formsel.options[4]=new Option("OEM/ODM产品加工","1024");
    break;
   case "1246":
   formsel.options[0]=new Option("产品设计解决方案","1328");
   formsel.options[1]=new Option("成套外(机)壳/结构件","1329");
   formsel.options[2]=new Option("成套产品商品模具","1330");
   formsel.options[3]=new Option("成套CKD/SKD散(组)件","1331");
   formsel.options[4]=new Option("OEM/ODM产品加工","1332");
    break;
   case "1338":
   formsel.options[0]=new Option("产品设计解决方案","1343");
   formsel.options[1]=new Option("成套外(机)壳/结构件","1342");
   formsel.options[2]=new Option("成套产品商品模具","1341");
   formsel.options[3]=new Option("成套CKD/SKD散(组)件","1340");
   formsel.options[4]=new Option("OEM/ODM产品加工","1339");
    break;
   case "960":
   formsel.options[0]=new Option("产品设计解决方案","1025");
   formsel.options[1]=new Option("成套外(机)壳/结构件","1028");
   formsel.options[2]=new Option("成套产品商品模具","1026");
   formsel.options[3]=new Option("成套CKD/SKD散(组)件","1027");
   formsel.options[4]=new Option("OEM/ODM产品加工","1029");
    break;
   case "1353":
   formsel.options[0]=new Option("产品设计解决方案","1354");
   formsel.options[1]=new Option("成套外(机)壳/结构件","1355");
   formsel.options[2]=new Option("成套产品商品模具","1356");
   formsel.options[3]=new Option("成套CKD/SKD散(组)件","1357");
   formsel.options[4]=new Option("OEM/ODM产品加工","1358");
    break;
   case "961":
   formsel.options[0]=new Option("产品设计解决方案","1030");
   formsel.options[1]=new Option("成套外(机)壳/结构件","1031");
   formsel.options[2]=new Option("成套产品商品模具","1032");
   formsel.options[3]=new Option("成套CKD/SKD散(组)件","1033");
   formsel.options[4]=new Option("OEM/ODM产品加工","1034");
    break;
   case "1345":
   formsel.options[0]=new Option("产品设计解决方案","1346");
   formsel.options[1]=new Option("成套外(机)壳/结构件","1347");
   formsel.options[2]=new Option("成套产品商品模具","1348");
   formsel.options[3]=new Option("成套CKD/SKD散(组)件","1349");
   formsel.options[4]=new Option("OEM/ODM产品加工","1350");
    break;
   case "1317":
   formsel.options[0]=new Option("产品设计解决方案","1318");
   formsel.options[1]=new Option("成套外(机)壳/结构件","1319");
   formsel.options[2]=new Option("成套产品商品模具","1320");
   formsel.options[3]=new Option("成套CKD/SKD散(组)件","1321");
   formsel.options[4]=new Option("OEM/ODM产品加工","1322");
    break;
   case "1169":
   formsel.options[0]=new Option("产品设计解决方案","1208");
   formsel.options[1]=new Option("成套外(机)壳/结构件","1209");
   formsel.options[2]=new Option("成套产品商品模具","1210");
   formsel.options[3]=new Option("成套CKD/SKD散(组)件","1211");
   formsel.options[4]=new Option("OEM/ODM产品加工","1212");
    break;
   case "1170":
   formsel.options[0]=new Option("产品设计解决方案","1203");
   formsel.options[1]=new Option("成套外(机)壳/结构件","1204");
   formsel.options[2]=new Option("成套产品商品模具","1205");
   formsel.options[3]=new Option("成套CKD/SKD散(组)件","1206");
   formsel.options[4]=new Option("OEM/ODM产品加工","1207");
    break;
   case "1014":
   formsel.options[0]=new Option("产品设计解决方案","1035");
   formsel.options[1]=new Option("成套外(机)壳/结构件","1036");
   formsel.options[2]=new Option("成套产品商品模具","1037");
   formsel.options[3]=new Option("成套CKD/SKD散(组)件","1038");
   formsel.options[4]=new Option("OEM/ODM产品加工","1039");
    break;
   case "962":
   formsel.options[0]=new Option("产品设计解决方案","1040");
   formsel.options[1]=new Option("成套外(机)壳/结构件","1041");
   formsel.options[2]=new Option("成套产品商品模具","1042");
   formsel.options[3]=new Option("成套CKD/SKD散(组)件","1043");
   formsel.options[4]=new Option("OEM/ODM产品加工","1044");
    break;
   case "963":
   formsel.options[0]=new Option("产品设计解决方案","1045");
   formsel.options[1]=new Option("成套外(机)壳/结构件","1046");
   formsel.options[2]=new Option("成套产品商品模具","1047");
   formsel.options[3]=new Option("成套CKD/SKD散(组)件","1048");
   formsel.options[4]=new Option("OEM/ODM产品加工","1049");
    break;
   case "964":
   formsel.options[0]=new Option("成套产品商品模具","1052");
   formsel.options[1]=new Option("成套CKD/SKD散(组)件","1053");
   formsel.options[2]=new Option("OEM/ODM产品加工","1054");
    break;
   case "965":
   formsel.options[0]=new Option("产品设计解决方案","1055");
   formsel.options[1]=new Option("成套外(机)壳/结构件","1056");
   formsel.options[2]=new Option("成套产品商品模具","1057");
   formsel.options[3]=new Option("成套CKD/SKD散(组)件","1058");
    break;
   case "966":
   formsel.options[0]=new Option("产品设计解决方案","1060");
   formsel.options[1]=new Option("成套外(机)壳/结构件","1061");
   formsel.options[2]=new Option("成套产品商品模具","1062");
   formsel.options[3]=new Option("成套CKD/SKD散(组)件","1063");
   formsel.options[4]=new Option("OEM/ODM产品加工","1064");
    break;
   case "1168":
   formsel.options[0]=new Option("产品设计解决方案","1213");
   formsel.options[1]=new Option("成套外(机)壳/结构件","1214");
   formsel.options[2]=new Option("成套CKD/SKD散(组)件","1216");
   formsel.options[3]=new Option("OEM/ODM产品加工","1217");
    break;
   case "967":
   formsel.options[0]=new Option("产品设计解决方案","1065");
   formsel.options[1]=new Option("成套外(机)壳/结构件","1066");
   formsel.options[2]=new Option("成套产品商品模具","1067");
   formsel.options[3]=new Option("成套CKD/SKD散(组)件","1068");
   formsel.options[4]=new Option("OEM/ODM产品加工","1069");
    break;
   case "1167":
   formsel.options[0]=new Option("产品设计解决方案","1218");
   formsel.options[1]=new Option("成套外(机)壳/结构件","1219");
   formsel.options[2]=new Option("成套产品商品模具","1220");
   formsel.options[3]=new Option("成套CKD/SKD散(组)件","1221");
   formsel.options[4]=new Option("OEM/ODM产品加工","1222");
    break;
   case "968":
   formsel.options[0]=new Option("产品设计解决方案","1070");
   formsel.options[1]=new Option("成套外(机)壳/结构件","1071");
   formsel.options[2]=new Option("成套产品商品模具","1072");
   formsel.options[3]=new Option("成套CKD/SKD散(组)件","1073");
   formsel.options[4]=new Option("OEM/ODM产品加工","1074");
    break;
   case "1997":
   formsel.options[0]=new Option("产品设计解决方案","1998");
    break;
   case "969":
   formsel.options[0]=new Option("产品设计解决方案","1075");
   formsel.options[1]=new Option("成套外(机)壳/结构件","1076");
   formsel.options[2]=new Option("成套产品商品模具","1077");
   formsel.options[3]=new Option("成套CKD/SKD散(组)件","1078");
   formsel.options[4]=new Option("OEM/ODM产品加工","1079");
    break;
   case "970":
   formsel.options[0]=new Option("产品设计解决方案","1080");
   formsel.options[1]=new Option("成套外(机)壳/结构件","1081");
   formsel.options[2]=new Option("成套产品商品模具","1082");
   formsel.options[3]=new Option("成套CKD/SKD散(组)件","1083");
   formsel.options[4]=new Option("OEM/ODM产品加工","1084");
    break;
   case "1477":
   formsel.options[0]=new Option("产品设计解决方案","1478");
   formsel.options[1]=new Option("成套外(机)壳/结构件","1479");
   formsel.options[2]=new Option("成套产品商品模具","1480");
   formsel.options[3]=new Option("成套CKD/SKD散(组)件","1481");
   formsel.options[4]=new Option("OEM/ODM产品加工","1482");
    break;
   case "971":
   formsel.options[0]=new Option("产品设计解决方案","1085");
   formsel.options[1]=new Option("成套外(机)壳/结构件","1086");
   formsel.options[2]=new Option("成套产品商品模具","1087");
   formsel.options[3]=new Option("成套CKD/SKD散(组)件","1088");
   formsel.options[4]=new Option("OEM/ODM产品加工","1089");
    break;
   case "972":
   formsel.options[0]=new Option("产品设计解决方案","1090");
   formsel.options[1]=new Option("成套产品商品模具","1092");
    break;
   case "974":
   formsel.options[0]=new Option("产品设计解决方案","1100");
   formsel.options[1]=new Option("成套外(机)壳/结构件","1101");
   formsel.options[2]=new Option("成套产品商品模具","1102");
   formsel.options[3]=new Option("成套CKD/SKD散(组)件","1103");
   formsel.options[4]=new Option("OEM/ODM产品加工","1104");
    break;
   case "1384":
   formsel.options[0]=new Option("产品设计解决方案","1385");
   formsel.options[1]=new Option("成套外(机)壳/结构件","1386");
   formsel.options[2]=new Option("成套产品商品模具","1387");
   formsel.options[3]=new Option("成套CKD/SKD散(组)件","1388");
   formsel.options[4]=new Option("OEM/ODM产品加工","1389");
    break;
   case "975":
   formsel.options[0]=new Option("产品设计解决方案","1105");
   formsel.options[1]=new Option("成套外(机)壳/结构件","1106");
   formsel.options[2]=new Option("成套产品商品模具","1107");
   formsel.options[3]=new Option("成套CKD/SKD散(组)件","1108");
    break;
   case "976":
   formsel.options[0]=new Option("产品设计解决方案","1110");
   formsel.options[1]=new Option("成套外(机)壳/结构件","1111");
   formsel.options[2]=new Option("成套产品商品模具","1112");
   formsel.options[3]=new Option("成套CKD/SKD散(组)件","1113");
   formsel.options[4]=new Option("OEM/ODM产品加工","1114");
    break;
   case "977":
   formsel.options[0]=new Option("产品设计解决方案","1115");
   formsel.options[1]=new Option("成套外(机)壳/结构件","1116");
   formsel.options[2]=new Option("成套产品商品模具","1117");
   formsel.options[3]=new Option("成套CKD/SKD散(组)件","1118");
   formsel.options[4]=new Option("OEM/ODM产品加工","1119");
    break;
   case "978":
   formsel.options[0]=new Option("产品设计解决方案","1120");
   formsel.options[1]=new Option("成套外(机)壳/结构件","1121");
   formsel.options[2]=new Option("成套产品商品模具","1122");
   formsel.options[3]=new Option("成套CKD/SKD散(组)件","1123");
   formsel.options[4]=new Option("OEM/ODM产品加工","1124");
    break;
   case "1177":
   formsel.options[0]=new Option("成套产品商品模具","1225");
   formsel.options[1]=new Option("成套CKD/SKD散(组)件","1226");
   formsel.options[2]=new Option("OEM/ODM产品加工","1227");
    break;
   case "1245":
   formsel.options[0]=new Option("产品设计解决方案","1333");
   formsel.options[1]=new Option("成套外(机)壳/结构件","1334");
   formsel.options[2]=new Option("成套产品商品模具","1335");
   formsel.options[3]=new Option("OEM/ODM产品加工","1337");
    break;
   case "1745":
   formsel.options[0]=new Option("产品设计解决方案","2003");
   formsel.options[1]=new Option("成套外(机)壳/结构件","2004");
   formsel.options[2]=new Option("成套CKD/SKD散(组)件","2006");
   formsel.options[3]=new Option("OEM/ODM产品加工","2007");
    break;
   case "979":
   formsel.options[0]=new Option("产品设计解决方案","1125");
   formsel.options[1]=new Option("成套外(机)壳/结构件","1126");
   formsel.options[2]=new Option("成套产品商品模具","1127");
   formsel.options[3]=new Option("成套CKD/SKD散(组)件","1128");
   formsel.options[4]=new Option("OEM/ODM产品加工","1129");
    break;
   case "2050":
    break;
   case "982":
    break;
   case "983":
    break;
   case "984":
    break;
   case "985":
    break;
   case "986":
    break;
   case "1173":
    break;
   case "1251":
    break;
   case "1265":
    break;
   case "1311":
    break;
   case "987":
    break;
   case "1013":
    break;
   case "1294":
    break;
   case "1174":
    break;
   case "988":
    break;
   case "989":
    break;
   case "990":
    break;
   case "991":
    break;
   case "1141":
    break;
   case "992":
    break;
   case "993":
    break;
   case "994":
    break;
   case "995":
    break;
   case "996":
    break;
   case "1646":
    break;
   case "1295":
    break;
   case "1291":
    break;
   case "997":
    break;
   case "998":
    break;
   case "1250":
    break;
   case "1140":
    break;
   case "1152":
    break;
   case "1690":
    break;
   case "1248":
    break;
   case "999":
    break;
   case "1000":
    break;
   case "1001":
    break;
   case "1002":
    break;
   case "1003":
    break;
   case "1647":
    break;
   case "1004":
    break;
   case "1005":
    break;
   case "1006":
    break;
   case "1008":
    break;
   case "1139":
    break;
   case "1009":
    break;
   case "1154":
    break;
   case "1012":
    break;
   case "1010":
    break;
   case "1253":
    break;
   case "1175":
    break;
   case "1359":
    break;
   case "1176":
    break;
   case "1172":
    break;
   case "1264":
    break;
   case "1293":
    break;
   case "1011":
    break;
   case "1130":
    break;
   case "1131":
    break;
   case "1133":
    break;
   case "1496":
    break;
   case "1497":
    break;
   case "1134":
    break;
   case "1135":
    break;
   case "1136":
    break;
   case "1351":
    break;
   case "1352":
    break;
   case "1137":
    break;
   case "1142":
    break;
   case "1143":
    break;
   case "1279":
    break;
   case "1138":
    break;
   case "1361":
    break;
   case "1651":
    break;
   case "1382":
    break;
   case "1371":
    break;
   case "1370":
    break;
   case "1469":
    break;
   case "1364":
    break;
   case "1362":
    break;
   case "1365":
    break;
   case "1366":
    break;
   case "1383":
    break;
   case "1653":
    break;
   case "1368":
    break;
   case "1890":
    break;
   case "1891":
    break;
   case "1942":
    break;
   case "1943":
    break;
   case "1944":
    break;
   case "1945":
    break;
   case "1946":
    break;
   case "1947":
    break;
   case "1948":
    break;
   case "1949":
    break;
   case "1950":
    break;
   case "1951":
    break;
   case "1952":
    break;
   case "1953":
    break;
   case "1954":
    break;
   case "1955":
    break;
   case "1956":
    break;
   case "1957":
    break;
   case "1958":
    break;
   case "1959":
    break;
   case "1960":
    break;
   case "1961":
    break;
   case "1962":
    break;
   case "1963":
    break;
   case "1964":
    break;
   case "2008":
    break;
   case "1990":
    break;
   case "1966":
    break;
   case "1969":
    break;
   case "1992":
    break;
   case "1993":
    break;
   case "1996":
    break;
   case "1972":
    break;
   case "1973":
    break;
   case "1974":
    break;
   case "2009":
    break;
   case "1994":
    break;
   case "1893":
    break;
   case "1894":
    break;
   case "1895":
    break;
   case "1896":
    break;
   case "1897":
    break;
   case "1898":
    break;
   case "1899":
    break;
   case "1900":
    break;
   case "1901":
    break;
   case "1902":
    break;
   case "1903":
    break;
   case "1904":
    break;
   case "1905":
    break;
   case "1907":
    break;
   case "1908":
    break;
   case "1909":
    break;
   case "1910":
    break;
   case "1917":
    break;
   case "1919":
    break;
   case "1920":
    break;
   case "1921":
    break;
   case "1922":
    break;
   case "1923":
    break;
   case "1924":
    break;
   case "1925":
    break;
   case "1926":
    break;
   case "1927":
    break;
   case "2016":
    break;
   case "1930":
    break;
   case "1931":
    break;
   case "1935":
    break;
   case "1936":
    break;
   case "1937":
    break;
   case "1938":
    break;
   case "1939":
    break;
   case "1940":
    break;
   case "1941":
    break;
   case "154":
    break;
   case "531":
    break;
   case "157":
    break;
   case "529":
    break;
   case "158":
    break;
   case "159":
    break;
   case "161":
    break;
   case "530":
    break;
   case "532":
    break;
   case "162":
    break;
   case "533":
    break;
   case "163":
    break;
   case "164":
    break;
   case "166":
    break;
   case "167":
    break;
   case "175":
    break;
   case "187":
    break;
   case "534":
    break;
   case "535":
    break;
   case "537":
    break;
   case "189":
    break;
   case "527":
    break;
   case "492":
    break;
   case "510":
    break;
   case "1485":
    break;
   case "1484":
    break;
   case "494":
    break;
   case "497":
    break;
   case "498":
    break;
   case "1662":
    break;
   case "493":
    break;
   case "496":
    break;
   case "491":
    break;
   case "525":
    break;
   case "1661":
    break;
   case "1466":
    break;
   case "1467":
    break;
   case "526":
    break;
   case "495":
    break;
   case "499":
    break;
   case "1495":
    break;
   case "1437":
    break;
   case "1438":
    break;
   case "1498":
    break;
   case "1439":
    break;
   case "1440":
    break;
   case "1441":
    break;
   case "1442":
    break;
   case "1443":
    break;
   case "1444":
    break;
   case "1445":
    break;
   case "1446":
    break;
   case "1447":
    break;
   case "1461":
    break;
   case "1448":
    break;
   case "1449":
    break;
   case "1450":
    break;
   case "1451":
    break;
   case "1452":
    break;
   case "1453":
    break;
   case "1459":
    break;
   case "1460":
    break;
   case "1454":
    break;
   case "1455":
    break;
   case "1457":
    break;
   case "1456":
    break;
   case "1464":
    break;
   case "1458":
    break;
   case "2307":
    break;
   case "2297":
   formsel.options[0]=new Option("高通滤波器","2301");
   formsel.options[1]=new Option("低通滤波器","2302");
   formsel.options[2]=new Option("带通滤波器","2303");
   formsel.options[3]=new Option("带阻滤波器","2304");
   formsel.options[4]=new Option("全通滤波器","2305");
    break;
   case "2298":
    break;
   case "2299":
    break;
   case "2300":
    break;
   case "2312":
    break;
   case "2306":
break;
}}
 function setvalue(formsel,selectedvalue){
   for(var i = 0;i < formsel.length; i++) {
      if(formsel[i].value==selectedvalue){formsel[i].selected = true;break;}
  }}