BATTERY
80000
-/23+
原装现货
BATTERY
69800
DIP/2022+
特价现货,提供BOM配单服务
BATTERY
47001
DIP/24+
房间现货,诚信经营,提供BOM配单服务
BATTERY
9200
DIP/23+
只做原装更多数量在途订单
BATTERY
5000
DIP/22+
原厂渠道可追溯,精益求精只做原装
BATTERY
5070
DIP/22+
原装正品,提供BOM服务
BATTERY
8391
DIP/22+
特价现货,提供BOM配单服务
BATTERY
31300
DIP/24+
只做原装,提供一站式配单服务
BATTERY
80000
-/23+
原装现货
BATTERY
5000
DIP/22+
一站式配单,只做原装
BATTERY
9200
DIP/23+
只做原装更多数量在途订单
BATTERY
5000
DIP/23+
优势产品大量库存原装现货
BATTERY
15800
DIP/-
旋尔只做进口原装,假一赔十...
BATTERY
18000
-/NEW
元器件代理百强企业
BATTERY
8700
DIP/2023+
原装现货
BATTERY
41101
DIP/-
大量现货,提供一站式配单服务
BATTERY
8700
DIP/2021+
原装现货
BATTERY
80000
-/23+
原装现货
BATTERY
3000
DIP/2021+
原装
iversity in functionality requires numerous components, most of which have different power rail voltages, with each rail having growing power demands and application-specific requirements. at the same time, consumers want smaller phones with maximum battery life and minimal battery charge time. all of these requirements have driven development of various high performance and/or highly specialized power management integrated circuits (ics). this article discusses how power management ics have evolved to
1 依材质区分 ■碳锌电池 heavy duty battery 亦称为锌锰电池,是目前最普遍之干电池,它有价格低廉和使用安全可靠的特点,基于环保因素的考量, 由于仍含有镉之成份,因此必须回收,以免对地球环境造成破坏。 ■碱性电池 alkaline battery 亦称为碱性干电池,适用于需放电量大及长时间使用。电池内阻较低,因此产生之电流较一般锰电池为大,而环保型含汞量只有0.025%,无须回收。 ■水银电池 silver oxide button cell 水银电池,因为污染和电容量之故线已逐渐被锂-锰配方取代 ■锂电池 ■镍镉充电电池 ni-cd (nickel cadmium battery) 已为大众早期广泛使用,可重覆约500次之充放电,但约10次充放电后即会产生记忆效应;另一个缺点是,在充放电时,阴极会长出镉的针状结晶,有时会穿透分隔物而引起内部枝状晶体式的短路。由于含有镉之成份,因此必须回收。 ■镍氢充电电池 ni-mh (nickel metal hyoride battery) 为目前市场主流之充电电池,
该多节锂离子聚合物电池充电器(带有电量计)设计将电池平衡和电量计方法集成于一个多节电池充电器中。 overview the device is designed for battery packs with 2, 3, or 4 li-ion/li-pol cells in series. the dedicated c-based software for real-time charging, cell-balancing and fuel gauging processes visualization and analysis is developed. the proposed device can be used as a complete battery pack management system for notebooks, medical, industrial and other similar applications. this battery pack management system provides: correct ch
us是lem公司自身的协议,该协议可以转换为串口协议,其转换电路是开放的,将该电路设计在扩展板上,实现主控板与sentinel模块的通讯。 e 由于at91sam9261提供液晶数据接口,因此可以直接与lcd实现连接。 4 整机联调 我们在变电站对该系统进行了实验,使用2组蓄电池,每组分别有54节2v 300ah的蓄电池,如下图: 编写测试程序在系统内运行,每隔半小时对各蓄电池模块进行一次取数,然后将信息通过调试串口打印出来。下面为某次取数得到的结果: # 1 battery : 2.28v 24.29 404.9 uohm # 2 battery : 2.24v 24.08 362.1 uohm # 3 battery : 2.22v 24.29 426.1 uohm # 4 battery : 2.29v 24.29 350.1 uohm # 5 battery : 2.25v 24.29 381.8 uohm # 6 battery : 2.28v 24.29 392.6 uohm # 7
池来供电的笔记本电脑来说,节能功能的使用就应该受到重视了。电脑硬件如何设计得更节能,这不是用户要解决的问题。用户能做的是在电脑设置上有效地使用节能选项。 节能设置有两处需要用户进行调节:一是在电脑的bios设置程序中有关于节能方式的设置;最重要的是在操作系统中有许多节能设置和操作。微机系统在实际执行时,windows系统中的节能设置应该优先于cmos中的设置。 a. bios中的节能设置 在cmos设置中,大都有一项“power savings”,其中可以选择“maximum battery life”和“maximum performance”等多个选项。“maximum battery life”是缺省的节能模式设置。笔记本电脑的节能模式有几种状态,如idle mode 空闲模式、standby mode待命(等待)模式、suspend mode悬挂(休眠)模式。笔记本电脑上的这些设置,之所以能够调节电能消耗,主要是在电脑进入节能状态后,适时地关闭一些不需使用的系统设备。如在等待状态时,关闭显示器和硬盘;进入休眠状态后,除了关闭显示器和硬盘外,还可以将内存中的内容保存到硬盘,整
离子电池已成为便携式设备,尤其是蜂窝电话的首选电源。
Search Battery公司顺应这种趋势,宣布全面提供最新款锂离子电池——SA1063448。这款新电池的标称容量为0.9Ah;额定电压为3.8V;内部阻抗范围为20Ω~60Ω。
...
伏打发明的伏打电池,它使人们第一次获得了比较稳定而持续的电流,具有划时代的意义。在伏打电池原理和研发精神的指引下,人们通过不断努力,开发了一代又一代的新型电池,从人们普遍使用的干电池到新型的太阳能电池、锂聚合物电池(li-polymer)和燃料电池等等,不仅在电池容量、体积、使用方便程度等方面有很大突破,更重要的是在这些新型电池的研发过程中,渗透着人们强烈的绿色环保意识,电池的开发、发展正以绿色环保作为重要的指导精神。 电池种类及特性 依材质区分 ■碳锌电池 heavy duty battery 亦称为锌锰电池,是目前最普遍之干电池,它有价格低廉和使用安全可靠的特点,基于环保因素的考量,由于仍含有镉之成份,因此必须回收,以免对地球环境造成破坏。 ■碱性电池 alkaline battery 亦称为碱性干电池,适用于需放电量大及长时间使用。电池内阻较低,因此产生之电流较一般锰电池为大,而环保型含汞量只有0.025%,无须回收。 ■水银电池 silver oxide button cell 水银电池,因为污染和电容量之故线已逐渐被锂-锰配方取代 ■锂电池 ■镍
间:2011年7月20日至2011年7月22日 所属行业:化工/能源/环保 主办单位:中国电池协会、上海市电子学会、上海国际广告展览有限公司、香港扩展国际集团有限公司 协办单位:亚太新能源行业协会(neiaap)、日本社团法人电池工业会、台湾电池协会、欧美协办单位电池(组)制造商协会ibma、英国电池制造商协会bbma、eurobat(欧洲蓄电池制造商协会)、欧洲轻便电池协会epba 承办单位:上海扩展展览服务有限公司 展会介绍:累积多年的电池展览会成功优势及资源,battery china 2011展会将以强大的中国市场需求为依托,全力打造成亚太地区顶级影响力的电池行业盛会!本届展会在原有的基础上大幅度提升展会规模、档次及影响力。相信battery china 2011将有更多的电池品牌企业参加,预计规模将翻3番以上,专业观众将超过50000人次。 battery china 2011展会的全面推广策略,更由长三角辐射至全国及亚太地区专业买家,让展商更能有效开拓中国以至海外国际市场,加强与目标买家接洽的机会。扩展展览凭借在电池展的领导地位,以及国际会展组织的丰富
美国空气动力研究实验室近日开发出了新型笔记本电池betavoltaic battery。该电池打破了以往常规的电池制作方式,其材料由半导体和放射同位素组成。当放射同位素衰减时,释放出的离子就可以转换成电力能源,从而达到为笔记本供电的功能和作用。 同位素的衰减周期是一个非常漫长的过程,产生的电能可以由爱因斯坦的质能方程式e=mc^2推算,因此使用放射同位素制作的电池续航时间可能会长达30年,这是现在化学材料制作的电池绝对不可能达到的。同时,半导体和放射同位素制作成的电池在重量和体积上也会大大减少,采用betavoltaic battery的笔记本和其他便携设备将会更轻更薄更加方便人们携带。 另外,发热量小也是betavoltaic battery的一大特点。与目前使用的化学电池相比,betavoltaic battery的发热量可以忽略不计,这就很好的解决了笔记本发热量的问题。 此外,是betavoltaic battery可以完全耗尽其内部的能量,剩余的部分完全是惰性的、无害的物质,这非常符合时下流行的绿色环保理念。 专家表示,如果研究一切进展顺利的话,这项技术将会在未来
美国空气动力研究实验室近日开发出了新型笔记本电池betavoltaic battery。该电池打破了以往常规的电池制作方式,其材料由半导体和放射同位素组成。当放射同位素衰减时,释放出的离子就可以转换成电力能源,从而达到为笔记本供电的功能和作用。 同位素的衰减周期是一个非常漫长的过程,产生的电能可以由爱因斯坦的质能方程式e=mc^2推算,因此使用放射同位素制作的电池续航时间可能会长达30年,这是现在化学材料制作的电池绝对不可能达到的。同时,半导体和放射同位素制作成的电池在重量和体积上也会大大减少,采用betavoltaic battery的笔记本和其他便携设备将会更轻更薄更加方便人们携带。 另外,发热量小也是betavoltaic battery的一大特点。与目前使用的化学电池相比,betavoltaic battery的发热量可以忽略不计,这就很好的解决了笔记本发热量的问题。 此外,是betavoltaic battery可以完全耗尽其内部的能量,剩余的部分完全是惰性的、无害的物质,这非常符合时下流行的绿色环保理念。 专家表示,如果研究一切进展顺利 的话,这项技
整流的ac/dc变流器。[gb/t2900.33,修饰] 3.1.5 ups逆变器 inverter 用于逆变的dc/ac变流器。[gb/t2900.33,修饰] 3.1.6 直流储能系统 dc energy storage system 由单个或多重器件(典型的是蓄电池)构成,用以提供所需储能时间的系统。 3.1.7 直流环节 dc link 整流器或整流器/充电器和逆变功能单元之间相互连接的直流电路。 3.1.8 (二次)蓄电池 (secondary) battery 两个或两个以上的电池单体连接在一起,作为电源使用的蓄电池[gb/t2900.11] 3.1.9 阀控密封(二次)蓄电池 valve regulated sealed (secondary) cell 在正常情况下,保持封闭的一种二次蓄电池,只有当内部压强超过预定值时,气体才能通过一个泄放装置排放出去。该蓄电池不能按常规添加电解液[gb/t2900.11]。 3.1.10 排气(二次)蓄电池 vented (secondary) cell 有盖的二次蓄电池,盖上有可让气体泄放
需要用到电池来供电的笔记本电脑来说,节能功能的使用就应该受到重视了。电脑硬件如何设计得更节能,这不是用户要解决的问题。用户能做的是在电脑设置上有效地使用节能选项。 节能设置有两处需要用户进行调节:一是在电脑的bios设置程序中有关于节能方式的设置;最重要的是在操作系统中有许多节能设置和操作。微机系统在实际执行时,windows系统中的节能设置应该优先于cmos中的设置。 1. bios中的节能设置 在cmos设置中,大都有一项“power savings”,其中可以选择“maximum battery life”和“maximum performance”等多个选项。“maximum battery life”是缺省的节能模式设置。笔记本电脑的节能模式有几种状态,如idle mode 空闲模式、standby mode待命(等待)模式、suspend mode悬挂(休眠)模式。笔记本电脑上的这些设置,之所以能够调节电能消耗,主要是在电脑进入节能状态后,适时地关闭一些不需使用的系统设备。如在等待状态时,关闭显示器和硬盘;进入休眠状态后,除了关闭显示器和硬盘外,还可以将内存中的内容保存到硬盘,整
night light saver v6 latest design of night light saver circuit built with at89c2051. nice firmware using c coding developed with sdcc. this new version has internal ni-mh battery backup, reset button and simple time setting. now the circuit board was embedded with lamp fixture. preset turn on period is from 18:00 to 22:00 everyday. you may let the saver turn on whenever you want. the period of time on can be reprogrammed with sdcc. howvere this project is not recommended for beginner. the c
转换器分为三类:升压型dc/dc转换器、降压型dc/dc转换器以及升降压型dc/dc转换器。根据需求可采用三类控制。pwm控制型效率高并具有良好的输出电压纹波和噪声。pfm控制型即使长时间使用,尤其小负载时具有耗电小的优点。pwm/pfm转换型小负载时实行pfm控制,且在重负载时自动转换到pwm控制。目前dc-dc转换器广泛应用于手机、mp3、数码相机、便携式媒体播放器等产品中。在电路类型分类上属于斩波电路。 figure 1. application circuit for 2-cells battery supply figure 2. application circuit for li-ion battery supply typical applications circuit rt9911,pdf datasheet (6 channel dc/dc converters) note : bottom pad is gnd pad, can be short to pin 6 (gnd)。 please remove q2 when use async boost and
电池充电器(battery charger) 也称电池充电座。它是电动车、电动工具、电玩、笔记本、数码及小型便携式电子设备及电子电器所用可充电电池充电用电子设备,一般由外壳、电源转换部分、充电检测部分、充电保护部分等组成。其输出类型为纯直流或脉动直流。按连接方式可分为插墙式和桌面式。按所充电电池的类型又可分为镍镉电池充电器、镍氢电池充电器、镍锌电池充电器、铅酸电池充电器、锂电池充电器等。按充电器的功能又可分为专用充电器和通用充电器。 来源:admin
it. he has made a composite amplifier using two transistors. the bc413b operates in common emitter to give a slight boost to the mic signal. this is followed by an emitter follower stage using the bc547c. this is necessary as the mic and circuit and battery will be some distance from the sound card, the low output impedance of the circuit and screened cable ensuring a clean signal with minimum noise pickup. 电脑的*电路 来源:安答
用一个镍电池片模拟锂电池lithium-based batteries are becoming standard in portable equipment. they have desirable characteristics, but lead times may be long unless you have a preferred-customer status with the battery manager. a backup alternative is desirable, especially for smaller companies. it should (ideally) provide the same performance, size, and cost as a lithium-type battery.nickel-metal-hydride (nimh) batteries are still in wide use. they're much cheaper than lithium batteries, and they come in very smal
vm7068-锂电池保护ic/vm7205-锂电池充电ic(微桥)vm7068--high precision protection circuit for li-ion or li-polymer battery 特点: ⊕little external elements ⊕high precision protection voltage threshold (over-charge/over-discharge) ⊕low power consumption under over discharge ⊕protection for battery short ⊕multi-type of detector voltage and time delay option ⊕0v-charge allow/inhibit ⊕ultra small so23-5 or sot23-6 package 应用: ⊕protection circuit for charge and discharge of li-ion or li-polymer battery ⊕high precision prote
管理ic/act3704/se9016the act3704/3706 are completed linear charger solutions for one or two-cell lithium ion and lithium polymer batteries. it incorporates an internal 14v high voltage power mosfet for constant-current/constant-voltage control. the battery regulation voltage is 0.5% accurate and is programmable from 4.1v to 4.3v and 8.2v to 8.6v. the charge current is programmable with an external resistor. for faster charging, the ics include a compensation feature to compensate for the battery’s ser
fluctuating charging current.fast charge termination by: -delta t / t , -deltav, 0 delta v, safety timer, maximum temperature,maximum voltage.linearly adjustable delta t/t detection slope andsafety timer.adjustable peak voltage timer for 0 delta v .battery voltage protection range selectable.selectable battery temperature protectionmode.protection against battery voltage and batterytemperature faults.selectable led display mode for battery status.five pulsed trickle charge modes.discharge-before-charg
one-pin keypad interface conserves battery powerthis idea builds on a previous ifd, "connect any keypad with any microcontroller using only one pin" (electronic design, may 1, 1998, p. 126), where a 555 timer connects a keypad switch matrix to a microprocessor. the timer converts a key press to a frequency of 1 for each key, which the processor measures. the great advantage is that only one processor pin is required. i was in exactly that situation—needing to connect a 4-by-4 switch matrix to