|
技术交流 | 电路欣赏 | 工控天地 | 数字广电 | 通信技术 | 电源技术 | 测控之家 | EMC技术 | ARM技术 | EDA技术 | PCB技术 | 嵌入式系统 驱动编程 | 集成电路 | 器件替换 | 模拟技术 | 新手园地 | 单 片 机 | DSP技术 | MCU技术 | IC 设计 | IC 产业 | CAN-bus/DeviceNe |
刚装的VisualDSP3.5,用不了,请大家帮忙. |
作者:as_ben 栏目:DSP技术 |
以下是3.5的报错信息: ----------------Configuration: gt800bios - Debug---------------- "E:\VisualDSP 3.5 16-Bit\ccblkfn.exe" -c .\c1166_16.c -g -proc ADSP-BF535 -o .\Debug\c1166_16.doj cc1458: Fatal error: could not obtain license 1 catastrophic error detected in the compilation of ".\c1166_16.c". Compilation terminated. cc3089: fatal error: Compilation failed Tool failed with exit/exception code: 1. Build was unsuccessful. |
2楼: | >>参与讨论 |
作者: lemys 于 2006/9/29 12:54:00 发布:
这个我有 我刚装的就是3.5 据我所知,早期设计商都是用3.5 现在出新的了,但是升级要钱啊 确保两件事情,就不会出现上面的事情 1、下载的软件是对的,我费了好久才发现官方3.5的下载地址。 2、license是对的。 再用不了,直接打电话给ADI,技术支持会非常耐性的给你解释的。 |
3楼: | >>参与讨论 |
作者: as_ben 于 2006/10/1 14:37:00 发布:
谢谢小研究! 我已经输入注册码了,并按照说明文档将计算机时间向后跳了两年,但还是出现以上问题。后来把时间调回来,就好了。 但编译时又出了新的错误信息,这回是link.exe有问题,再次请教各位。 |
4楼: | >>参与讨论 |
作者: pplinux 于 2006/10/8 8:50:00 发布:
hehe I think~~ If you use crack,Can ADI help you? |
5楼: | >>参与讨论 |
作者: gongfutea 于 2006/10/11 16:08:00 发布:
刚装的VisualDSP3.5,用不了,请大家帮忙. 现在4.5有破解 不需要改硬盘序列号了 |
6楼: | >>参与讨论 |
作者: 小研究 于 2006/12/13 17:00:00 发布:
版本高了未必好吧 版本高了未必好吧,其实3.3,3.5都不错的,而且得看用的是什么DSP,据说218X系列的最高版本就是3.5。 不过VDSP在中文操作系统下可能会有些BUG。 |
7楼: | >>参与讨论 |
作者: as_ben 于 2006/12/14 17:01:00 发布:
我的4.5里create ldf用不了. 在project option里可以改变程序的加载位置吗,比如原来在SRAM上运行,可不可以改在片外SDRAM上运行. |
8楼: | >>参与讨论 |
作者: as_ben 于 2006/12/20 14:34:00 发布:
有哪位知道,谢谢. |
9楼: | >>参与讨论 |
作者: as_ben 于 2006/12/20 14:34:00 发布:
谢谢 |
10楼: | >>参与讨论 |
作者: zl1982 于 2006/12/22 11:40:00 发布:
发个4.5 你瞅瞅 HOW TO CRACK VISUALDSP++ 4.0 ---------------------------- With thanks to teams LND and HAZE. 1. Download the INSTALLer (if you haven't already done so) from: http://www.analog.com/xtras/dsp/tools/VisualDSP++4.0.exe. Run the INSTALLer. (WARNING - it needs almost 1GB spare space to do its work, though the INSTALLed usage is much less). Start up the app amd note down the Machine ID given to you in the reg. DIALOG (eight hex digits). Cancel and CLOSE the app. 2. Open ANALOG.SRC in a text editor (e.g Notepad) and replace the four '?' chars on the last LINE with the 8-digit hex NUMBER you noted down. Save the file. 3. Double-click makelic.bat - this should produce a file "license.dat" with the zeros on the PACKAGE and FEATURE LINEs replaced by 12-char hex NUMBERs. Open this file in Notepad and check it looks OK. 4. Copy the license.dat file to <INSTALL folder>ANALOG Devices\VisualDSP 4.0\SYSTEM. Done! If you check the license status in the app it will show permanent verified status for 21xx processors ONLY, however all options and processor suites should be enabled. DISCLAIMER ---------- These materials are not fit for any purpose. No responsibility is accepted for any consequences arising out of their use, or for anything else really. I don't care what you do with this stuff. If you want to use it to avoid paying for SOFTWARE that's your responsibility. I don't care if you reverse-engineer, plagiarise or rip off any PART of this release. Do what you like. I'll not be responsible. |
11楼: | >>参与讨论 |
作者: zl1982 于 2006/12/22 11:50:00 发布:
不能上传,要的话留下邮箱地址 |
12楼: | >>参与讨论 |
作者: stoneman 于 2006/12/23 12:59:00 发布:
请给我发一个!!!! 请给我发一个!!!! 先谢谢了! jonestven@tom.com |
13楼: | >>参与讨论 |
作者: zl1982 于 2006/12/25 10:22:00 发布:
邮件已发请查收 |
14楼: | >>参与讨论 |
作者: stoneman 于 2006/12/26 10:42:00 发布:
收到!谢谢zl1982! |
15楼: | >>参与讨论 |
作者: zl1982 于 2006/12/26 16:04:00 发布:
客气了 |
16楼: | >>参与讨论 |
作者: as_ben 于 2007/1/5 15:52:00 发布:
我的邮箱是as_ben@163.com,谢谢. |
|
|
免费注册为维库电子开发网会员,参与电子工程师社区讨论,点此进入 |
Copyright © 1998-2006 www.dzsc.com 浙ICP证030469号 |