AM28F020-200FI Datasheet

  • AM28F020-200FI

  • Advanced Micro Devices [2 Megabit (256 K x 8-Bit) CMOS 12.0...

  • 480.71KB

  • AMD

扫码查看芯片数据手册

上传产品规格书

PDF预览

FINAL
Am28F020
2 Megabit (256 K x 8-Bit)
CMOS 12.0 Volt, Bulk Erase Flash Memory
DISTINCTIVE CHARACTERISTICS
s
High performance
鈥?Access times as fast as 70 ns
s
CMOS low power consumption
鈥?30 mA maximum active current
鈥?100 碌A maximum standby current
鈥?No data retention power consumption
s
Compatible with JEDEC-standard byte-wide
32-pin EPROM pinouts
鈥?32-pin PDIP
鈥?32-pin PLCC
鈥?32-pin TSOP
s
10,000 write/erase cycles minimum
s
Write and erase voltage 12.0 V
卤5%
s
Latch-up protected to 100 mA from
鈥? V to V
CC
+1 V
s
Flasherase Electrical Bulk Chip Erase
鈥?One second typical chip erase time
s
Flashrite Programming
鈥?10 碌s typical byte program time
鈥?4 s typical chip program time
s
Command register architecture for
microprocessor/microcontroller compatible
write interface
s
On-chip address and data latches
s
Advanced CMOS flash memory technology
鈥?Low cost single transistor memory cell
s
Automatic write/erase pulse stop timer
GENERAL DESCRIPTION
The Am28F020 is a 2 Megabit Flash memory orga-
nized as 256 Kbytes of 8 bits each. AMD鈥檚 Flash mem-
ories offer the most cost-effective and reliable read/
write non-volatile random access memor y. The
Am28F020 is packaged in 32-pin PDIP, PLCC, and
TSOP versions. It is designed to be reprogrammed and
erased in-system or in standard EPROM programmers.
Th e Am 28F 020 i s eras ed w hen s h ip ped from
the factory.
The standard Am28F020 offers access times of as fast
as 70 ns, allowing high speed microprocessors to
operate without wait states. To eliminate bus conten-
tion, the device has separate chip enable (CE#) and
output enable (OE#) controls.
AMD鈥檚 Flash memories augment EPROM functionality
with in-circuit electrical erasure and programming. The
Am28F020 uses a command register to manage this
functionality, while maintaining a JEDEC-standard 32-
pin pinout. The command register allows for 100% TTL
level control inputs and fixed power supply levels during
erase and programming, while maintaining maximum
EPROM compatibility.
AMD鈥檚 Flash technology reliably stores memory con-
tents even after 10,000 erase and program cycles. The
AMD cell is designed to optimize the erase and pro-
gramming mechanisms. In addition, the combination of
advanced tunnel oxide processing and low internal
electric fields for erase and programming operations
produces reliable cycling. The Am28F020 uses a
12.0卤5% V
PP
supply input to perform the Flasherase
and Flashrite functions.
The highest degree of latch-up protection is achieved
with AMD鈥檚 proprietary non-epi process. Latch-up pro-
tection is provided for stresses up to 100 mA on
address and data pins from 鈥? V to V
CC
+1 V.
The Am28F020 is byte programmable using 10 碌s
programming pulses in accordance with AMD鈥檚
Flashrite programming algorithm. The typical room
temperature programming time of the Am28F020 is
four seconds. The entire chip is bulk erased using 10
ms erase pulses according to AMD鈥檚 Flasherase
algorithm. Typical erasure at room temperature is
accomplished in less than one second. The windowed
package and the 15鈥?0 minutes required for EPROM
erasure using ultraviolet light are eliminated.
Commands are written to the command register using
standard microprocessor write timings. Register con-
tents serve as input to an internal state-machine, which
controls the erase and programming circuitry. During
write cycles, the command register internally latches
Publication#
14727
Rev:
F
Amendment/+2
Issue Date:
January 1998

AM28F020-200FI PDF文件相关型号

AM28F020-200JE,AM28F020-200PC,AM28F020-200PE,AM28F020-200PI,AM28F020-70EI,AM28F020-70FI,AM28F020-70JE,AM28F020-70PC,AM28F020-90FC,AM28F020-90PCB

AM28F020-200FI相关型号PDF文件下载

您可能感兴趣的PDF文件资料

热门IC型号推荐

扫码下载APP,
一键连接广大的电子世界。

在线人工客服

买家服务:
卖家服务:

0571-85317607

客服在线时间周一至周五
9:00-17:30

关注官方微信号,
第一时间获取资讯。

建议反馈
返回顶部

建议反馈

联系人:

联系方式:

按住滑块,拖拽到最右边
>>
感谢您向阿库提出的宝贵意见,您的参与是维库提升服务的动力!意见一经采纳,将有感恩红包奉上哦!