鈭?/div>
10碌F/200V
C3
100碌F/50V
4卤1.0
16.8MAX.
25% Min鈭扡ine
Be sure to use fuse for safety.
For actual usage, Please kindly evaluate and confirm our part mounted in your product,
Especially, Please make sure to confirm whether the load current exceed Max. rated current
by using the current probe.
External components setting
0
5
10
15
20
25
Output Current Io(mA)
30
Load Regulation
Output Voltage Vo(V)
FUSE: Fuse
C1: Input capacitor
C2: Noise removal capacitor
Please make sure to use quick acting fuse (0.5A)
Above 200V, 3.3 to 22碌F
Ripple current 0.13Arms above
Above 200V, 0.1 to 0.22碌F
Film capacitor or Ceramic capacitor
Reduce the noise terminal voltage.
The constant value should be evaluated in the product.
Above 25V, 100 to 470碌F, Low impedance
ESR : 0.39鈩?Max.
Ripple current 0.1Arms above
Impedance of capacitor effects the output ripple voltage.
Resistance : 10 to 22鈩? Power : More than 1/4鈩?/div>
Use a rectifying diode with the peak reverse voltage of 400V or higher,
the average rectification current of 0.5A or larger and the peak surge current
of 20A or larger. When using an input capacitor of a large capacity, choose
a component that endures the inrush current on power-up.
This product is compatible with full-wave rectification.
Varistor must be used. It protects this part from lightning surge and static
electricity.
5.3
5.2
5.1
5.0
4.9
4.8
4.7
0
Load Regulation
(Ta=25
掳C
, Vi=141V)
5
10
15
20
25
Output Current Io(mA)
30
C3: Output capacitor
Surface Temperature Rising
Temperature Rising
鈭員(掳C)
R1: Noise removal resistor
D1: Rectifier diode
50
40
30
20
10
0
0
Surface Temperature Rising
(Ta=25掳C, Vi=141V)
5
ZNR: Varistor
10
15
20
25
Output Current Io(mA)
30
Rev.A
1
2
3
