卢
ISL9301
Data Sheet
February 25, 2008
FN6435.0
High Input Voltage Charger With Power
Path Management
The ISL9301 is a fully integrated high input voltage
single-cell Li-ion battery charger with power path
management function. This charger performs the CC/CV
charge function required by Li-ion batteries. The charger
accepts an input voltage up to 28V but is disabled when the
input voltage exceeds 10.5V OVP threshold. The 28V rating
eliminates the overvoltage protection circuit required in a
low-voltage charger. The charge current and the
end-of-charge (EOC) current are programmable with
external resistors. When the battery voltage is lower than
2.8V, the charger preconditions the battery with 16% of the
programmed charge current. When the charge current
reduces to the programmable EOC current level during the
CV charge phase, the EOC indicator (CHG) will toggle to
logic LOW to indicate the end-of-charge condition. The
charger will continue to charge until the user programmed
timeout interval has elapsed, then the charger is terminated.
The ISL9301 uses separate power paths to supply the
system load and charge the battery. This feature allows the
system to immediately operate with a completely discharged
battery. This feature also allows the charge to terminate
when the battery is full while continuing to supply the system
with the input source, thus minimizing unnecessary
charge/discharge cycles and improving the battery life.
Two indication pins (PPR and CHG) allow simple interface to
a microprocessor or LEDs.
Features
鈥?Complete Charger for Single-Cell Li-ion/Polymer Batteries
鈥?Power Path Management Optimize Charge and System
Currents
鈥?/div>
Intelligent
Timeout Interval Based on Actual Charge
Current
鈥?Integrated Disconnect Switch to Disconnect the Battery
鈥?1% Charger Output Voltage Accuracy
鈥?Programmable Charge Current
鈥?Programmable End-of-Charge Current
鈥?Charge Current Thermal Foldback for Thermal Protection
鈥?Trickle Charge for Fully Discharged Batteries
鈥?28V Maximum Voltage at VIN pin
鈥?Power Presence and Charge Indications
鈥?Ambient Temperature Range: -40掳C to +85掳C
鈥?10 Ld 3x3 DFN Package
鈥?Pb-Free (RoHS Compliant)
Applications
鈥?Mobile Phones
鈥?Blue-Tooth Devices
鈥?PDAs
鈥?MP3 Players
Ordering Information
PART
NUMBER
(Note)
ISL9301IRZ
PART
MARKING
9301
TEMP.
RANGE
(掳C)
PACKAGE
(Pb-Free)
PKG.
DWG. #
鈥?Stand-Alone Chargers
鈥?Other Handheld Devices
Pinout
ISL9301
(10 LD DFN)
TOP VIEW
-40 to +85 10 Ld 3X3 DFN L10.3X3C
-40 to +85 10 Ld 3X3 DFN L10.3X3C
ISL9301IRZ-T 9301
* Please refer to TB347 for details on reel specifications.
NOTE: These Intersil Pb-free plastic packaged products employ
special Pb-free material sets; molding compounds/die attach
materials and 100% matte tin plate PLUS ANNEAL - e3 termination
finish, which is RoHS compliant and compatible with both SnPb and
Pb-free soldering operations. Intersil Pb-free products are MSL
classified at Pb-free peak reflow temperatures that meet or exceed
the Pb-free requirements of IPC/JEDEC J STD-020.
VIN
VBAT
PPR
CHG
TIME
1
2
3
4
5
10
VOUT
9
8
7
6
BATON
IREF
IMIN
GND
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774
|
Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright 漏 Intersil Americas Inc. 2008. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.
1
2
3
4
5
6
7
8
9
10
11
12
