鈥?/div>
Molded epoxy package meets UL94V-0
End-Cap terminals solderable per MIL-STD-750,
o
Method 2026 (max 260 C for 10 seconds.
Polarity is indicated by cathode band. Bidirectional
devices have no polarity band.
Body marked with P/N without TGL41 prefix.
Weight: 0.06 grams (approximate)
Tape and Reel packaging per EIA-481-2 with 12
mm tape with 5000 per 13 inch reel.
鈥?/div>
TGL41-6.8 thru 200CA
*
Unless otherwise specified.
NOTES:
Non-repetitive current pulse, per Figure 3 and derated above TA = 25 C per Figure 2.
2
Mounted on 4.0 mm copper pads to each terminal. (See Figure 3)
8.3 ms single half-sine wave duty cycle = 4 pulses per minute max. Peak forward voltage at 40 A is 3.5 volts (unipolar only)
o
o
Derate linearly above 100 C to zero at 150 C for dc steady-state power. Also see Figure 2 for transient derating.
Peak pulse current waveform is 10/1000
碌s,
with maximum duty cycle of 0.01%. (See Figure 4)
o
Copyright
漏
2003
01-29-2003 REV A
Microsemi
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
Page 1
next