鈥?/div>
Up to 80% Efficiency
8-Pin NanoFree鈩ackage (Chipscale, CSP)
3
脳
3-mm QFN Package
APPLICATIONS
White LED Driver
Cellular Phones
PDA, Pocket PC, and Smart Phones
Digital Still Camera
Handheld Devices
DESCRIPTION
The TPS61060/61/62 is a high-frequency, synchronous boost converter with constant current output to drive up
to 5 white LEDs. For maximum safety, the device features integrated overvoltage and an advanced short-circuit
protection when the output is shorted to ground. The device operates with 1-MHz fixed switching frequency to
allow small external components and to simplify possible EMI problems. The device comes with three different
overvoltage protection thresholds (14 V/18 V/23 V) to allow inexpensive and small-output capacitors with lower
voltage ratings. The LED current is initially set with the external sense resistor Rs, and the feedback voltage is
regulated to 500 mV or 250 mV, depending on the ILED pin configuration. Digital brightness control is
implemented by applying a simple digital signal to the ILED pin. Alternatively, a PWM signal up to 1 kHz can be
applied to the enable pin to control the LED brightness. During shutdown, the output is disconnected from the
input to avoid leakage current through the LEDs.
TYPICAL APPLICATION
C2
220 nF
VIN
2.7 V to 6 V
C1
1
mF
L1
22
mH
VIN
EN
ILED
SW
OUT
FB
R
S
12
W
GND PGND
Figure 1.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
NanoFree, PowerPAD are trademarks of Texas Instruments.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright 漏 2004, Texas Instruments Incorporated