三极管低频放大单元电路

类别:专题新闻  出处:网络整理  发布于:2007-03-29 08:47:05 | 3463 次阅读

有趣的电路请大家分析?
有趣的电路请大家分析?
(2006-08-15,3134) [查看全文]
 *一种抗干扰复位电路
一种抗干扰复位电路
(2006-08-15,2254) [查看全文]
 *射极跟隨器參考電路
射极跟隨器參考電路
(2006-08-15,2283) [查看全文]
 *脉冲发生电路
脉冲发生电路
(2006-08-15,1903) [查看全文]
 *Hi-Fi 前置放大器
Hi-Fi 前置放大器
Hi-Fi 前置放大器 This circuit was submitted by Graham Maynard from Newtownabbey, Northern Ireland. It has an exceptionally fast high frequency response, as demonstrated by applying an 100kHz squarewave to the input. All graphs were produced using Tina Pro.
(2005-12-06,4086) [查看全文]
 *ECM 麦克前置放大器
ECM 麦克前置放大器
ECM 麦克前置放大器 Both transistors are low noise types. In the original circuit, I used BC650C which is an ultra low noise device. These transistors are now hard to find but BC109C are a good replacement. The circuit is very device tolerant and will set its quiescent point at roughly half the supply voltage at the emitter of the last transistor. The electret condenser microphone (ECM) contains a very sensitive microphone element and an internal FET preamp, a power supply in the range 2 to 10 volts DC is therefore necessary. Suitable ECM's may be obtained from Maplin Electronics. The 1k resistor limits the current to the mic. The output impedance is very low and well suited to driving cables over distances up to 50 meters. Screened cable therefore is not necessary.
(2005-12-06,2803) [查看全文]
 *成熟低成本的均流电路
成熟低成本的均流电路
成熟低成本的均流电路
(2005-11-17,3031) [查看全文]
 *成品功放电路-威廉逊电子管放大器副本
成品功放电路-威廉逊电子管放大器副本
成品功放电路-威廉逊电子管放大器副本
(2005-11-17,3804) [查看全文]
 *PT100的前端电路
PT100的前端电路
PT100的前端电路,请大家欣赏。
(2005-11-17,3119) [查看全文]
 *脉冲宽度调制电路
脉冲宽度调制电路
脉冲宽度调制电路,里面有详细的分析。
(2005-11-16,3439) [查看全文]
 *一款高效G类放大器
一款高效G类放大器
一款高效G类放大器;_请欣赏!这是一款功率阀值在20W启控的高效G类放大器,比起单独使用TDA7293具有更高的效率和更可靠的高功率输出能力。
(2005-11-16,2688) [查看全文]
关键词:三极管

全年征稿 / 资讯合作

稿件以电子文档的形式交稿,欢迎大家砸稿过来哦!

联系邮箱:3342987809@qq.com

版权与免责声明

凡本网注明“出处:维库电子市场网”的所有作品,版权均属于维库电子市场网,转载请必须注明维库电子市场网,https://www.dzsc.com,违反者本网将追究相关法律责任。

本网转载并注明自其它出处的作品,目的在于传递更多信息,并不代表本网赞同其观点或证实其内容的真实性,不承担此类作品侵权行为的直接责任及连带责任。其他媒体、网站或个人从本网转载时,必须保留本网注明的作品出处,并自负版权等法律责任。

如涉及作品内容、版权等问题,请在作品发表之日起一周内与本网联系,否则视为放弃相关权利。

相关资讯

热点排行

广告