您好!欢迎来到维库电子市场网
发布采购信息
当前位置:首页 >> IC应用 >> LTC3414 - 4A, 4MHz, Monolithic Synchronous Step-Down Regulator
LTC3414 - 4A, 4MHz, Monolithic Synchronous Step-Down Regulator
发布时间:2015/1/5 18:11:39 | 阅读:569
特点 High Efficiency: Up to 95% 4A Output Current Low Quiescent Current: 64µA Low RDS(ON) Internal Switch: 67 milliOhm Programmable Frequency: 300KHz to 4MHz 2.25V to 5.5V Input Voltage Range ±2% Ou

特点

  • High Efficiency: Up to 95%
  • 4A Output Current
  • Low Quiescent Current: 64µA
  • Low RDS(ON) Internal Switch: 67 milliOhm
  • Programmable Frequency: 300KHz to 4MHz
  • 2.25V to 5.5V Input Voltage Range
  • ±2% Output Voltage Accuracy
  • 0.8V Reference Allows Low Output Voltage
  • Selectable Forced Continuous/Burst Mode®operation with Adjustable Burst Clamp
  • Synchronizable Switching Frequency
  • Low Dropout Operation: 100% Duty Cycle
  • Power Good Output Voltage Monitor
  • Overtemperature Protected
  • Available in 20-Lead Exposed TSSOP Package

典型应用

LTC3414 Typical Application
LTC3414 Typical Application

描述

The LTC®3414 is a high efficiency monolithic synchronous, step-down DC/DC converter utilizing a constant frequency, current mode architecture. It operates from an input voltage range of 2.25V to 5.5V and provides a regulated output voltage from 0.8V to 5V while delivering up to 4A of output current. The internal synchronous power switch with 67milliOhm on-resistance increases efficiency and eliminates the need for an external Schottky diode. Switching frequency is set by an external resistor or can be synchronized to an external clock. 100% duty cycle provides low dropout operation extending battery life in portable systems. OPTI-LOOP® compensation allows the transient response to be optimized over a wide range of loads and output capacitors.

The LTC3414 can be configured for either Burst Mode operation or forced continuous operation. Forced continuous operation reduces noise and RF interference while Burst Mode operation provides high efficiency by reducing gate charge losses at light loads. In Burst Mode operation, external control of the burst clamp level allows the output voltage ripple to be adjusted according to the requirements of the application.

应用

  • Point-of-Load Regulation
  • Notebook Computers
  • Portable Instruments
  • Distributed Power Systems

扫码下载APP,
一键连接广大的电子世界。

在线人工客服

买家服务:
卖家服务:
技术客服:

0571-85317607

网站技术支持

13606545031

客服在线时间周一至周五
9:00-17:30

关注官方微信号,
第一时间获取资讯。

建议反馈
返回顶部

建议反馈

联系人:

联系方式:

按住滑块,拖拽到最右边
>>
感谢您向阿库提出的宝贵意见,您的参与是维库提升服务的动力!意见一经采纳,将有感恩红包奉上哦!