鈥?/div>
IEC 384-14 Second Edition Subclass X: (Note 4)
X1
X1
X1
X1
X1
X2
Subclass X Voltage (Vrms 50-60 Hz)
400 VAC
400 VAC
400 VAC
400 VAC
400 VAC
400 VAC
Peak Impulse Voltage in Service
2.5 to 4.0 kV
2.5 to 4.0 kV
2.5 to 4.0 kV
2.5 to 4.0 kV
2.5 to 4.0 kV
To 2.5 kV
Application
High Pulse
High Pulse
High Pulse
High Pulse
High Pulse
Gen. Purpose
Damp Heat, Steady State Recognition
Code HKF - 25掳C/ + 125掳C/21 days
Note 1
Voltage Ratings: All ratings are manufacturer鈥檚
rating.
鈥?Part markings are governed by agency
rules and customer requirements.
鈥?Parts are marked 250 VAC unless otherwise
requested.
Note 2
UL1414 Across-The-Line, Antenna Coupling, and
Line-By-Pass Capacitors:
鈥?Across-The-Line鈥擜 capacitor connected
either across a supply circuit or between
one side of a supply circuit and a conductive
part that may be connected to earth ground.
鈥?Antenna-Coupling鈥擜 capacitor connected
from an antenna terminal to circuits within an
appliance.
鈥?Line-By-Pass鈥擜 capacitor connected between
one side of a supply circuit and an accessible
conductive part.
Note 3
IEC 384-14 Subclass Y Capacitors:
鈥?A capacitor of a type suitable for use in situations
where failure of the capacitor could lead to
danger of electric shock.
鈥?Class Y capacitors are divided into sub- classes
based on type of insulation bridged and voltage
ranges.
鈥?For definitions of basic, supplementary,
double and reinforced insulation, see IEC
Publication 536.
鈥?Subclass Y capacitors may be used in
applications which require a Subclass
X rating.
Note 4
IEC 384-14 Subclass X Capacitors:
鈥?A capacitor of a type suitable for use
in situations where failure of the capacitor
would not lead to danger of electric
shock.
鈥?Class X capacitors are divided into subclasses
according to the peak impulse test voltage
superimposed on the main voltage
Note 5
AC Leakage Current:
鈥?For all Series (except 125L) - AC Leakage
Current (mA) speci铿乪d at 250 Vrms, 60 Hz.
鈥?For 125L Series - AC Leakage Current
(mA) speci铿乪d at 125 Vrms, 60Hz.
Note 6
Alternate Lead Spacings of 7.5mm and 10mm
are available bulk or tape & reel.
鈥?European Required Minimum Lead Clearance
(Prevents Use of Inside Crimp) .315" (8mm) on
440L Series; 0.118" (3mm) on all other series.
www.vishay.com
20
ceramite.support@vishay.com
Document Number: 23092
Revision 14-May-02
1
2
3
