您的位置：维库电子市场网 > Datasheet > MX29F016MC-90

MX29F016MC-90 Datasheet

  • MX29F016MC-90

  • 16M-BIT [2M X 8] CMOS EQUAL SECTOR FLASH MEMORY

  • 848.92KB

  • 37页

  • MCNIX

阅览下载 纠错 0

扫码查看芯片数据手册

上传产品规格书

PDF预览

MX29F016
16M-BIT [2M X 8] CMOS EQUAL SECTOR FLASH MEMORY
FEATURES
鈥?Single power supply 5V operation for read, erase and
program
鈥?Fast access time: 90/120ns
鈥?Low power consumption
- 30mA maximum active current
- 0.2uA typical standby current
鈥?Command register architecture
- Byte Programming (7us typical)
- Sector Erase:32 equal sector with of 64KByte each
鈥?Auto Erase (chip & sector) and Auto Program
- Automatically erase any combination of sectors
with Erase Suspend capability.
- Automatically program and verify data at specified
address
鈥?Erase suspend/Erase Resume
- Suspends an erase operation to read data from,
or program data to, another sector that is not being
erased, then resumes the erase.
鈥?Status Reply
- Data polling & Toggle bit for detection of program
and erase cycle completion.
鈥?Group Sector protect/unprotect for 5V/12V system.
鈥?Group Sector protection
- Hardware sector protect/unprotect method for each
group which consists of two adjacent sectors
- Temporary group sector unprotect allows code
changes in previously locked sectors
鈥?100,000 minimum erase/program cycles
鈥?Latch-up protected to 100mA from -1V to VCC+1V
鈥?Low VCC write inhibit is equal to or less than 3.2V
鈥?Package type:
- 40-pin TSOP, 44-pin SOP, 48-pin TSOP
鈥?Compatibility with JEDEC standard
- Pinout and software compatible with single-power
supply Flash
GENERAL DESCRIPTION
The MX29F016 is a 16-mega bit Flash memory organized
as 2M bytes of 8 bits. MXIC's Flash memories offer the
most cost-effective and reliable read/write non-volatile
random access memory. The MX29F016 is packaged in
40-pin TSOP or 44-pin SOP, 48-pin TSOP. It is designed
to be reprogrammed and erased in system or in standard
EPROM programmers.
The standard MX29F016 offers access time as fast as
90ns, allowing operation of high-speed microprocessors
without wait states. To eliminate bus contention, the
MX29F016 has separate chip enable (CE) and output
enable (OE ) controls.
MXIC's Flash memories augment EPROM functionality
with in-circuit electrical erasure and programming. The
MX29F016 uses a command register to manage this
functionality. The command register allows for 100%
TTL level control inputs and fixed power supply levels
during erase and programming, while maintaining
maximum EPROM compatibility.
MXIC Flash technology reliably stores memory
contents even after 100,000 erase and program
cycles. The MXIC cell is designed to optimize the
erase and program mechanisms. In addition, the
combination of advanced tunnel oxide processing
and low internal electric fields for erase and
programming operations produces reliable cycling.
The MX29F016 uses a 5.0V卤10% VCC supply to
perform the High Reliability Erase and auto
Program/Erase algorithms.
The highest degree of latch-up protection is
achieved with MXIC's proprietary non-epi process.
Latch-up protection is proved for stresses up to
100 milliamps on address and data pin from -1V to
VCC + 1V.
P/N:PM0590
REV. 1.3, JUN. 13, 2001
1

MX29F016MC-90相关型号PDF文件下载

您可能感兴趣的PDF文件资料

热门IC型号推荐

©2026 维库电子市场网（www.dzsc.com）　备案号：浙B2-20050339-1 经营许可证：浙B2-20210386版权声明
买家服务热线：0571-85317607 | 买家服务部QQ： QQ:1609526468
卖家服务热线：0571-85317607 | 卖家服务部QQ： QQ:331652727

扫码下载APP，
一键连接广大的电子世界。

在线人工客服

买家服务：
卖家服务：
技术客服：

0571-85317607

网站技术支持

13606545031

客服在线时间周一至周五
9:00-17:30

关注官方微信号，
第一时间获取资讯。

建议反馈
返回顶部

建议反馈

联系人：

联系方式：

按住滑块，拖拽到最右边
>>
感谢您向阿库提出的宝贵意见，您的参与是维库提升服务的动力！意见一经采纳，将有感恩红包奉上哦！

PDF纠错X

投诉电话：0571-85317607 投诉QQ：

如选匿名将无法为您反馈投诉结果，建议实名投诉！