您的位置：维库电子市场网 > Datasheet > BQ24703PWRG4

BQ24703PWRG4 Datasheet

  • BQ24703PWRG4

  • MULTICHEMISTRY BATTERY CHARGER CONTROLLER AND SYSTEM POWER S...

  • 518.72KB

  • 32页

  • TI

阅览下载 纠错 0

扫码查看芯片数据手册

上传产品规格书

PDF预览

bq24702, bq24703
SLUS553D 鈭?MAY 2003 鈭?REVISED JULY 2005
APPLICATION INFORMATION
Programming the Thresholds
The input-referenced thresholds for battery depleted, ac detection and charge voltage are defined by
dimensioning the external dividers connected to pins BATDEP, ACDET and BATP. This calculation is simple,
and consists of assuming that when the input voltage equals the desired threshold value the voltage at the
related pin is equal to the pin internal reference voltage:
Vinput = Vpin
脳
(1 + Kres)
where:
Vinput = Target threshold, referenced to input signal
Vpin = Internal reference(1.196 V for BATP; 1.246 V for BATDEP, ACDET)
Kres = External resistive divider gain ( for instance: R24/R25 for BATP)
When using external dividers with high absolute value the input bias currents for those pins must be included
in the threshold calculation. On the bq24702/3 the input bias currents increase the actual value for the threshold
voltage, when compared to the values calculated using the internal references and divider gain only:
Vinput = Vpin
脳
(1+Kres) + Vbias
The increase on the threshold voltage is given by:
Vbias = Rdiv
脳
Ipin
where:
Vbias = Voltage increase due to pin bias current
Rdiv = External resistor value for resistor connected from pin to input voltage
Ipin = Maximum pin leakage current
The effect of IB can be reduced if the resistor values are decreased.
Dynamic Power Management
The dynamic power management (DPM) feature allows a cost effective choice of an ac wall-adapter that
accommodates 90% of the system鈥檚 operating-current requirements. It minimizes battery charge time by
allocating available power to charge the battery (i.e. I
BAT
= I
ADPT
鈭?I
SYS
). If the system plus battery charge
current exceeds the adapter current limit, as shown in Figure 1, the DPM feature reduces the battery charge
current to maintain an overall input current consumption within user defined power capability of the wall-adapter.
As the system鈥檚 current requirements decrease, additional current can be directed to the battery, thereby
increasing battery charge current and minimizing battery charge time.
The DPM feature is inherently designed into the PWM controller by inclusion of the three control loops,
battery-charge regulation voltage, battery-charge current, and adapter-charge current, refer to Figure 2. If any
of the three user programmed limits are reached, the corresponding control loop commands the PWM controller
to reduce duty cycle, thereby reducing the battery charge current.
www.ti.com
15

BQ24703PWRG4 产品属性

  • 2,000

  • 集成电路 (IC)

  • PMIC - 电池管理

  • -

  • 充电管理

  • 多化学

  • 4.5 V ~ 28 V

  • -40°C ~ 85°C

  • 表面贴装

  • 24-TSSOP（0.173"，4.40mm 宽）

  • 24-TSSOP

  • 带卷 (TR)

  • 296-18396-ND - EVALUATION MODULE FOR BQ24703

BQ24703PWRG4相关型号PDF文件下载

您可能感兴趣的PDF文件资料

热门IC型号推荐

©2024 维库电子市场网（www.dzsc.com）　备案号：浙B2-20050339-1 经营许可证：浙B2-20210386版权声明
买家服务热线：0571-85317607 | 买家服务部QQ： QQ:1609526468
卖家服务热线：0571-85317607 | 卖家服务部QQ： QQ:331652727

扫码下载APP，
一键连接广大的电子世界。

在线人工客服

买家服务：
卖家服务：

0571-85317607

客服在线时间周一至周五
9:00-17:30

关注官方微信号，
第一时间获取资讯。

建议反馈
返回顶部

建议反馈

联系人：

联系方式：

按住滑块，拖拽到最右边
>>
感谢您向阿库提出的宝贵意见，您的参与是维库提升服务的动力！意见一经采纳，将有感恩红包奉上哦！

PDF纠错X

投诉电话：0571-85317607 投诉QQ：

如选匿名将无法为您反馈投诉结果，建议实名投诉！