鈥?/div>
Three Half-Bridges
Optimized for DC motor management applications
Delivers up to 0.6 A continuous, 1.2 A peak current
R
DS ON
; typ. 0.8
鈩?
@ 25
掳C
per switch
Output: short circuit protected and diagnosis
Overtemperature-Protection with hysteresis
and diagnosis
Standard SPI-Interface/Daisy chain capable
Very low current consumption in stand-by (Inhibit)
mode (typ. 10
碌A
for power and 2
碌A
for logic
supply, @ 25
掳C)
Over- and Undervoltage-Lockout
CMOS/TTL compatible inputs with hysteresis
No crossover current
Internal clamp diodes
Enhanced power P-DSO-Package
Programming compatibility to the TLE 5208-6 G
Ordering Code
Q67006-A9334
P-DSO-14-9
Enhanced Power
Type
TLE 6208-3 G
Functional Description
Package
P-DSO-14-9
The TLE 6208-3 G is a fully protected
Triple-Half-Bridge-Driver
designed specifically for
automotive and industrial motion control applications. The part is based on the Siemens
power technology SPT
庐
which allows bipolar and CMOS control circuitry in accordance
with DMOS power devices existing on the same monolithic circuitry.
In motion control up to 2 actuators (DC-Motors) can be connected to the 3 halfbridge-
outputs (cascade configuration). Operation modes forward (cw), reverse (ccw), brake
and high impedance are controlled from a standard SPI-Interface. The possibility to
control the outputs via software from a central logic, allows limiting the power dissipation.
So the standard P-DSO-14-package meets the application requirements and saves
PCB-Board-space and cost. Furthermore the build-in features like Over- and
Undervoltage-Lockout, Over-Temperature-Protection and the very low quiescent current
in stand-by mode opens a wide range of automotive- and industrial-applications.
Data Sheet
1
2001-05-10