您的位置：维库电子市场网 > Datasheet > AD8318

AD8318 Datasheet

  • AD8318

  • 1 MHz - 8 GHz, 60 dB Logarithmic Detector/Controller

  • 2952.16KB

  • 25页

  • AD

阅览下载 纠错 0

扫码查看芯片数据手册

上传产品规格书

PDF预览

1 MHz 鈥?8 GHz, 60 dB
Logarithmic Detector/Controller
AD8318
FEATURES
Wide bandwidth: 1 MHz to 8 GHz
High accuracy: 卤1.0 dB over 55 dB range (f < 5.8 GHz)
Stability over temperature: 卤0.5 dB
Low noise measurement/controller output VOUT
Pulse response time 10/12 ns (fall/rise)
Integrated temperature sensor
Small footprint CSP package
Power-down feature: <1.5 mW at 5 V
Single-supply operation: 5V @ 68 mA
Fabricated using high speed SiGe process
FUNCTIONAL BLOCK DIAGRAM
VPSI
ENBL
TADJ
VPSO
TEMP
TEMP
SENSOR
GAIN
BIAS
SLOPE
I
V
VSET
I
DET
INHI
INLO
DET
DET
DET
V
VOUT
CLPF
APPLICATIONS
RF transmitter PA setpoint control and level monitoring
RSSI measurement in base stations, WLAN, radar
CMIP
CMOP
Figure 1.
GENERAL DESCRIPTION
The AD8318 is a demodulating logarithmic amplifier, capable of
accurately converting an RF input signal to a corresponding
decibel-scaled output voltage. It employs the progressive
compression technique over a cascaded amplifier chain, each
stage of which is equipped with a detector cell. The device can be
used in measurement or controller mode. The AD8318
maintains accurate log conformance for signals of 1 MHz to
6 GHz and provides useful operation to 8 GHz. The input range
is typically 60 dB (re: 50
鈩?
with error less than
卤1
dB. The
AD8318 has a 10 ns response time that enables RF burst
detection to beyond 60 MHz. The device provides
unprecedented logarithmic intercept stability versus ambient
temperature conditions. A 2 mV/K slope temperature sensor
output is also provided for additional system monitoring. A
single supply of +5 V is required. Current consumption is
typically 68 mA. Power consumption decreases to <1.5 mW
when the device is disabled.
The AD8318 can be configured to provide a control voltage to a
VGA, such as a power amplifier or a measurement output, from
pin VOUT. Since the output can be used for controller
applications, special attention has been paid to minimize
wideband noise. In this mode, the setpoint control voltage is
applied to VSET. The feedback loop through an RF
amplifier is closed via VOUT; the output of which regulates
the amplifier鈥檚 output to a magnitude corresponding to V
SET
.
The AD8318 provides 0 V to 4.9 V output capability at the
VOUT pin, suitable for controller applications. As a
measurement device, VOUT is externally connected to
VSET to produce an output voltage V
OUT
that is a decreasing
linear-in-dB function of the RF input signal amplitude.
The logarithmic slope is nominally
鈭?5
mV/dB, but can be
adjusted by scaling the feedback voltage from VOUT to the
VSET interface. The intercept is +20 dBm (re: 50
鈩?
CW
input) using the INHI input. These parameters are very
stable against supply and temperature variations.
The AD8318 is fabricated on a SiGe bipolar IC process and
is available in a 4 mm 脳 4 mm, 16-pin LFCSP package, for
the operating temperature range of 鈥?0
o
C to +85
o
C.
Rev. 0
Information furnished by Analog Devices is believed to be accurate and reliable.
However, no responsibility is assumed by Analog Devices for its use, nor for any
infringements of patents or other rights of third parties that may result from its
use. Specifications subject to change without notice. No license is granted by
implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective
owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
www.analog.com
Tel: 781.329.4700
Fax: 781.326.8703
漏 2003 Analog Devices, Inc. All rights reserved.
04853-001

AD8318相关型号PDF文件下载

您可能感兴趣的PDF文件资料

热门IC型号推荐

©2024 维库电子市场网（www.dzsc.com）　备案号：浙B2-20050339-1 经营许可证：浙B2-20210386版权声明
买家服务热线：0571-85317607 | 买家服务部QQ： QQ:1609526468
卖家服务热线：0571-85317607 | 卖家服务部QQ： QQ:331652727

扫码下载APP，
一键连接广大的电子世界。

在线人工客服

买家服务：
卖家服务：

0571-85317607

客服在线时间周一至周五
9:00-17:30

关注官方微信号，
第一时间获取资讯。

建议反馈
返回顶部

建议反馈

联系人：

联系方式：

按住滑块，拖拽到最右边
>>
感谢您向阿库提出的宝贵意见，您的参与是维库提升服务的动力！意见一经采纳，将有感恩红包奉上哦！

PDF纠错X

投诉电话：0571-85317607 投诉QQ：

如选匿名将无法为您反馈投诉结果，建议实名投诉！