鈭?/div>
C2
Vo
Verify proper operation under actual conditions before use. In particular, confilm that
the load current dose not exceed the maximumrating.
0
20
40 60 80 100 120 140 160
Output Current Io(mA)
Surface Temperature Rising
External components setting
FUSE: Fuse
C1: Input Capacitor
C2: Output Capacitor
Please make sure to use quick acting fuse (1A)
above 450V, 3.3碌F to 33碌F
Ripple current 0.13Arms above
above 35V, 100碌F to 470碌F, Low impedance
ESR : 0.4鈩?Max.
Ripple current 0.25Arms above
Impedance of capacitor effects the output ripple voltage.
above 450V, 0.1碌F to 0.22碌F
Film capacitor or Ceramic capacitor
reduce the noise terminal voltage.
The constant value should be evaluated in the product.
Inductance : 1mH, Rating current: above 400mA
Choose components that do not easily get magnetically saturated in
high temperature.
Recommended part : C10-FR 1.0mH(MITSUMI)
Use a rectifying diode with the peak reverse voltage of 800V or higher,
the average rectification current of 1A or larger and the peak surge
current of 20A or larger. When using an input capacitor of a large capacity,
choose a component that endures the inrush current on power-up.
This products is compatible with full-wave rectification.
10鈩?to 22鈩?1/4W
Reduce the noise terminal voltage.
The constant value should be evaluated in the product.
Varistor must be used. It protects this part from lightning surge and static
electricity.
50
45
40
35
30
25
20
15
10
5
0
Temperature Rising
鈭員(
掳C
)
Surface Temperature Rising
(Ta=25
掳C
, Vi=311V)
0
50
100
Output Current Io(mA)
150
C3: For noise terminal
voltage reduction capacitor
L1: Power inductor
D1: Rectifier diode
R1: For noise terminal
voltage reduction resistor
ZNR: Varistor