Product Bulletin
Surface Mount Ceramic Chip Capacitors 鈥?X7R Dielectric
Outline Drawing
W
T
S
ELECTRODES
L
B
NICKEL PLATE
CONDUCTIVE METALLIZATION
TIN PLATE
Dimensions 鈥?Millimeters (Inches)
EIA Size
Code
1812
Metric Size
Code
4532
L
Length
4.5 (.177)
卤 0.30 (.012)
W
Width
3.2 (.126)
卤 0.30 (.012)
B
Bandwidth
0.60 (.024)
卤 0.35 (.014)
S
Separation
N/A
See below for thickness dimension.
Capacitance Value
Capacitance
Values (渭F)
4.7
10.0
KEMET Part
Number
C1812C475(1)5RAC
C1812C106(1)3RAC
Voltage
50
25
Capacitance
Tolerance
K,M
K,M
Thickness
mm
1.60 (.063) 卤 0.20 (.008)
1.60 (.063) 卤 0.20 (.008)
Qty
7鈥?Reel
1,000
1,000
Qty
13鈥?Reel
4,000
4,000
(1) Insert capacitance tolerance K for 卤10% or M for 卤20%.
These components are also available with SnPb plated nickel barrier termination as an option.
Electrical Parameters
As detailed in the KEMET Surface Mount Catalog F3102 for X7R, with following specific requirements based on room
temperature (25掳C) parameters:
鈥?Operating Range: -55掳C to +125掳C, with no-bias capacitance shift limited to 卤 15% over that range.
鈥?Insulation Resistance (IR) measured after 2 minutes at rated voltage @ 25掳C: Limit is 500 megohm microfarads or
10G惟, whichever of the two is smaller.
鈥?Capacitance and Dissipation Factor (DF) measured at the following conditions. 1 kHz and 1 Vrms.
DF Limits for 50V product is 2.5% and 3.5% for 25V product.
Soldering Process
These components are suitable for reflow soldering only. All parts incorporate the standard KEMET barrier
layer of pure nickel, with an overplate of pure tin to provide excellent solderability as well as resistance to
leaching.
Marking
These chips will be supplied unmarked. However, marking is available as an extra cost option.
Qualification/Certification
AEC-Q200 Rev. C - Automotive
RoHS 5 - SnPb termination
RoHS 6 - 100% tin termination
In general, the information in the KEMET Surface Mount catalog F3102 applies to these
capacitors. The
information in this bulletin supplements that in the catalog.
漏 KEMET Electronics Corporation 鈥?P.O. Box 5928 鈥?Greenville, SC 29606 (864) 963-6300 鈥?www.kemet.com
F-9124 2/07