庐
EL9110
Data Sheet
July 15, 2005
FN7305.4
Differential Receiver/Equalizer
The EL9110 is a single channel differential receiver and
equalizer. It contains a high speed differential receiver with 5
programmable poles. The outputs of these pole blocks are
then summed into an output buffer. The equalization length
is set with the voltage on a single pin. The EL9110 also
contains a three-statable output, enabling multiple devices to
be connected in parallel and used in a multiplexing
application.
The gain can be adjusted up or down by 6dB using the
V
GAIN
control signal. In addition, a further 6dB of gain can
be switched in to provide a matched drive into a cable.
The EL9110 has a bandwidth of 150MHz and consumes just
33mA on 卤5V supply. A single input voltage is used to set the
compensation levels for the required length of cable.
The EL9110 is available in the 16-pin QSOP package and is
specified for operation over the full -40掳C to +85掳C
temperature range.
Features
鈥?150MHz -3dB bandwidth
鈥?CAT-5 compensation
- 75MHz @ 1000 ft
- 125MHz @ 500 ft
鈥?33mA supply current
鈥?Differential input range 3.2V
鈥?Common mode input range 卤4.5V
鈥?卤5V supply
鈥?Output to within 1.5V of supplies
鈥?Available in 16-pin QSOP package
鈥?Pb-Free plus anneal available (RoHS compliant)
Applications
鈥?Twisted-pair receiving/equalizer
鈥?KVM (Keyboard/Video/Mouse)
鈥?VGA over twisted-pair
Ordering Information
PART
NUMBER
EL9110IU
EL9110IU-T7
EL9110IU-T13
EL9110IUZ
(See Note)
EL9110IUZ-T7
(See Note)
EL9110IUZ-T13
(See Note)
PACKAGE
16-Pin QSOP
16-Pin QSOP
16-Pin QSOP
16-Pin QSOP
(Pb-free)
16-Pin QSOP
(Pb-free)
16-Pin QSOP
(Pb-free)
TAPE & REEL
-
7鈥?/div>
13鈥?/div>
-
7鈥?/div>
13鈥?/div>
PKG. DWG. #
MDP0040
MDP0040
MDP0040
MDP0040
鈥?Security video
Pinout
EL9110
(16-PIN QSOP)
TOP VIEW
CTRL_REF 1
16 CMEXT
15 VS+
14 ENBL
13 VSA+
12 VOUT
11 VSA-
10 0V
9 X2
MDP0040
MDP0040
VCTRL 2
VINP 3
VINM 4
VS- 5
CMOUT 6
VGAIN 7
LOGIC_REF 8
NOTE: Intersil Pb-free plus anneal products employ special Pb-free
material sets; molding compounds/die attach materials and 100%
matte tin plate termination finish, which are RoHS compliant and
compatible with both SnPb and Pb-free soldering operations. Intersil
Pb-free products are MSL classified at Pb-free peak reflow
temperatures that meet or exceed the Pb-free requirements of
IPC/JEDEC J STD-020.
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774
|
Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2003, 2005. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.
1
2
3
4
5
6
7
8
