ISL6563CR Datasheet

  • ISL6563CR

  • Two-Phase Multiphase Buck PWM Controller with Integrated MOS...

  • 45.69KB

  • 19页

  • INTERSIL

扫码查看芯片数据手册

上传产品规格书

PDF预览

ISL6563
Data Sheet
April 13, 2005
FN9126.6
Two-Phase Multiphase Buck PWM
Controller with Integrated MOSFET Drivers
The ISL6563 two-phase PWM control IC provides a
precision voltage regulation system for advanced
microprocessors. Multiphase power conversion is a marked
departure from single phase converter configurations
employed to satisfy the increasing current demands of
modern microprocessors and other electronic circuits. By
distributing the power and load current, implementation of
multiphase converters utilize smaller and lower cost
transistors with fewer input and output capacitors. These
reductions accrue from the higher effective conversion
frequency with higher frequency ripple current due to the
phase interleaving process of this topology.
Outstanding features of this controller IC include
programmable VID codes compatible with Intel VRM9,
VRM10, as well as AMD鈥檚 Hammer microprocessors, along
with a system regulation accuracy of
卤1%.
The droop
characteristic, used to reduce the overshoot or undershoot of
the output voltage, is easily programmed with a single resistor.
Important features of this controller IC include a set of
sophisticated overvoltage and overcurrent protection.
Overvoltage results in the converter turning the lower
MOSFETs ON to clamp the rising output voltage and protect
the microprocessor. Like other Intersil multiphase
controllers, the ISL6563 uses cost and space-saving
r
DS(ON)
sensing for channel current balance, dynamic
voltage positioning, and overcurrent protection. Channel
current balancing is automatic and accurate with the
integrated current-balance control system. Overcurrent
protection can be tailored to any application with no need for
additional parts. These features provide advanced protection
for the microprocessor and power system.
Features
鈥?Integrated Two-Phase Power Conversion
鈥?Both 5V and 12V Conversion
鈥?Precision Channel Current Sharing
- Loss Less Current Sampling - Uses r
DS(ON)
鈥?Precision Output Voltage Regulation
-
卤1%
System Accuracy Over Temperature (Commercial)
鈥?Microprocessor Voltage Identification Inputs
- Up to a 6-Bit DAC
- Selectable between Intel鈥檚 VRM9, VRM10, or AMD鈥檚
Hammer DAC codes
- Resistor-Programmable Droop Voltage
鈥?Fast Transient Recovery Time
鈥?Overcurrent Protection
鈥?Improved, Multi-tiered Overvoltage Protection
鈥?Capable of Start-up into a Pre-Charged Output
鈥?QFN Package:
- Compliant to JEDEC PUB95 MO-220
QFN - Quad Flat No Leads - Package Outline
- Near Chip Scale Package footprint, which improves
PCB efficiency and has a thinner profile
鈥?Pb-Free Available (RoHS Compliant)
Pinout
ISL6563 (QFN)
TOP VIEW
UGATE1
19
18 PHASE1
17 LGATE1
25
GND
16 PVCC
15 LGATE2
14 PGND
13 PHASE2
7
ISEN
8
VCC
9
OFS
10
SSEND
11
BOOT2
12
UGATE2
BOOT1
20
Ordering Information
PART NUMBER
ISL6563CR
TEMP.
(掳C)
PACKAGE
PKG.
DWG. #
L24.4x4B
VID1
VID0
DACSEL/VID5
VRM10
COMP
FB
1
2
3
4
5
6
24
23
22
21
0 to 70 24 Ld 4x4 QFN
ISL6563CRZ (Note 1) 0 to 70 24 Ld 4x4 QFN (Pb-free) L24.4x4B
ISL6563IR
0 to 70 24 Ld 4x4 QFN
L24.4x4B
ISL6563IRZ (Note 1) 0 to 70 24 Ld 4x4 QFN (Pb-free) L24.4x4B
ISL6563EVAL1
NOTES:
1. Intersil Pb-free products employ special Pb-free material sets;
molding compounds/die attach materials and 100% matte tin
plate termination finish, which are RoHS compliant and
compatible with both SnPb and Pb-free soldering operations.
Intersil Pb-free products are MSL classified at Pb-free peak
reflow temperatures that meet or exceed the Pb-free
requirements of IPC/JEDEC J STD-020.
2. Add 鈥?T鈥?suffix for Tape and Reel.
Evaluation Platform
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143
|
Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright 漏 Intersil Americas Inc. 2003-2005. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.
ENLL
VID2
VID3
VID4

ISL6563CR 产品属性

  • 75

  • 集成电路 (IC)

  • PMIC - 稳压器 - 专用型

  • -

  • 控制器,Intel VRM9,VRM10,AMD Hammer 应用

  • 5 V ~ 12 V

  • 1

  • 0.8 V ~ 1.85 V

  • 0°C ~ 70°C

  • 表面贴装

  • 24-VFQFN 裸露焊盘

  • 24-QFN(4x4)

  • 管件

ISL6563CR相关型号PDF文件下载

您可能感兴趣的PDF文件资料

热门IC型号推荐

扫码下载APP,
一键连接广大的电子世界。

在线人工客服

买家服务:
卖家服务:

0571-85317607

客服在线时间周一至周五
9:00-17:30

关注官方微信号,
第一时间获取资讯。

建议反馈
返回顶部

建议反馈

联系人:

联系方式:

按住滑块,拖拽到最右边
>>
感谢您向阿库提出的宝贵意见,您的参与是维库提升服务的动力!意见一经采纳,将有感恩红包奉上哦!