TV鈥檚. It is capable of delivering 3.1 watts per channel to a 4鈩?/div>
single-ended load with less than 1% THD+N or 7.5 watts
mono BTL to an 8鈩?load, with less than 10% THD+N from a
12V
DC
power supply.
Boomer audio power amplifiers were designed specifically to
provide high quality output power with a minimal amount of
external components. The LM4950 does not require boot-
strap capacitors or snubber circuits. Therefore, it is ideally
suited for display applications requiring high power and mini-
mal size.
The LM4950 features a low-power consumption active-low
shutdown mode. Additionally, the LM4950 features an inter-
nal thermal shutdown protection mechanism along with short
circuit protection.
The LM4950 contains advanced pop & click circuitry that
eliminates noises which would otherwise occur during
turn-on and turn-off transitions.
The LM4950 is a unity-gain stable and can be configured by
external gain-setting resistors.
Key Specifications
j
Quiscent Power Supply Current
j
P
OUT
(SE)
16mA (typ)
3.1W (typ)
7.5W (typ)
40碌A (typ)
V
DD
= 12V, R
L
= 4鈩? 1% THD+N
j
P
OUT
(BTL)
V
DD
= 12V, R
L
= 8鈩? 10% THD+N
j
Shutdown current
Features
n
Pop & click circuitry eliminates noise during turn-on and
turn-off transitions
n
Low current, active-low shutdown mode
n
Low quiescent current
n
Stereo 3.1W output, R
L
= 4鈩?/div>
n
Mono 7.5W BTL output, R
L
= 8鈩?/div>
n
Short circuit protection
n
Unity-gain stable
n
External gain configuration capability
Applications
n
Flat Panel Monitors
n
Flat panel TV鈥檚
n
Computer Sound Cards
Typical Application
20047078
FIGURE 1. Typical Bridge-Tied-Load (BTL) Audio Amplifier Application Circuit
Boomer
庐
is a registered trademark of National Semiconductor Corporation.
漏 2004 National Semiconductor Corporation
DS200470
www.national.com
next