ISO 9001 CERTIFIED BY DSCC
M.S.KENNEDY CORP.
29 AMP, 75V, 3 PHASE MOSFET
BRIDGE WITH INTELLIGENT
INTEGRATED GATE DRIVE
4301
(315) 701-6751
4707 Dey Road Liverpool, N.Y. 13088
FEATURES:
75 Volt Motor Supply Voltage
29 Amp Output Switch Capability, All N-Channel MOSFET Output Bridge
100% Duty Cycle High Side Conduction Capable
Suitable for PWM Applications from DC to 100KHz
Shoot-Through/Cross Conduction Protection
Undervoltage Lockout Protection
Programmable Dead-Time Control
Low Active Enable for Bridge Shutdown Control
Isolated Package Design for High Voltage Isolation Plus Good Thermal Transfer
Available with Three Lead Bend Options
MIL-PRF-38534 QUALIFIED
DESCRIPTION:
The MSK 4301 is a 3 phase MOSFET bridge plus drivers in a convenient isolated hermetic package. The hybrid is
capable of 29 amps of output current and 75 volts of DC bus voltage. It has a full line of protection features, including
undervoltage lockout protection of the bias voltage, cross conduction control and a user programmable dead-time control for
shoot-through elimination. In addition, the bridge may be shut down by using the Enable control. The MSK 4301 provides
good thermal conductivity for the MOSFETs due to the electrically isolated package design that allows direct heat sinking
of the device without insulators.
EQUIVALENT SCHEMATIC
TYPICAL APPLICATIONS
3 Phase Brushless DC
Servo Control
Fin Actuator Control
Gimbal Control
3 Phase AC
Induction Motor Control
HVAC Blower Control
1
2
3
4
5
6
7
8
9
10
PIN-OUT INFORMATION
BH
BL
AL
AH
SWR
VBIAS
EN
CL
CH
GND
20
19
18
17
16
15
14
13
12
11
A脴
A脴
V+
V+
B脴
B脴
C脴
C脴
RSENSE
RSENSE
1
Rev. D 4/01
1
2
3
4
5
