MVR32
Resistors
Chip trimmer potentiometers
MVR32
!Features
1) Superb solderability thanks to extra soldering electrode.
2) Close match between wiper and resistive element reduces wiper noise.
3) Mounting can be automated by using a carrier tape.
4) Extremely thin dimensions and light weight facilitate miniaturization of equipment.
5) Two-digit markings used to indicate resistance.
6) Special screwdriver (AD1804) available separately.
7) ROHM resistors have approved ISO-9001 certification. Design and specifications are subject to change without notice.
Carefully check the specification sheet before using or ordering it.
!
Ratings
Item
Rated power
Conditions
Power must be derated according to the power derating curve in
Figure 1 when ambient temperature exceeds 70藲C.
100
80
60
40
20
0
Specifications
0.1W (1 / 10W) / element
at 70藲C
POWER LOAD (%)
鈥?55
0
70
100
125
AMBIENT TEMPERATURE ( 藲C)
Fig.1
Rated voltage
The voltage rating is calculated by the following equation. If the value
obtained exceeds the maximum operating voltage, the voltage rating
is equal to the maximum operating voltage.
E : Rated voltage (V)
E= P
脳
R
Nominal total
resistance range
Total
resistance tolerance
Resistance
variation
Effective rotation angle
Operating temperature
Reactive variable
range
P : Rated power (W)
R : Nominal resistance (鈩?
100
鈭?/div>
1M鈩?/div>
卤25%
B (linear) characteristics
250卤20藲
鈭?5藲C 鈭?+125藲C
Rotational angle, both ends
within 10% (R>150鈩?
within 20% (R鈮?50鈩?
(recommended resistance value : E3 series)
(applicable resistance value : E3 series)
Max. operating voltage : 50V
鈥?/div>
Before using components in circuits where they will be exposed to transients such as pulse loads (short-duration, high-level loads), be certain to evaluate the
component in the mounted state. In addition, the reliability and performance of this component cannot be guaranteed if it is used with a steady state voltage that
is greater than its rated voltage.
鈥?/div>
The remainder of flux may negatively affect product performance and reliability. So please make sure to wash and remove flux completely washing.
1
2
3
4
5
6
7
8
9
