Direct Drive of Doubly-Terminated 75-鈩?/div>
TQFP-48 PowerPAD鈩?PACKAGE
(TOP VIEW)
applications
D
High-Definition Television (HDTV) Set-Top
D
D
D
Boxes/Receivers
High-Resolution Image Processing
Desktop Publishing
Direct Digital Synthesis/I-Q Modulation
GY0
GY1
GY2
GY3
GY4
GY5
GY6
GY7
GY8
GY9
CLK
SYNC_T
See ALSO: THS8134 (8 bit, pin-compatible)
description
The THS8133 is a general-purpose triple high-speed D/A converter (DAC) optimized for use in video/graphics
applications. The device operates from a 5-V analog supply and a 3-V to 5-V range digital supply. The THS8133
has a sampling rate up to 80 MSPS. The device consists of three 10-bit D/A converters and additional circuitry
for bi-level/tri-level sync and blanking level generation in video applications.
THS8133 is also well suited in applications where multiple well-matched and synchronously operating DACs
are needed; for example, I-Q modulation and direct-digital synthesis in communications equipment.
The current-steering DACs can be directly terminated in resistive loads to produce voltage outputs. The device
provides a flexible configuration of maximum output current drive. Its output drivers are specifically designed
to produce standard video output levels when directly connected to a single-ended doubly-terminated 75
鈩?/div>
coaxial cable. Full-scale video/sync are generated in a 7:3 ratio, compliant with SMPTE standards for GBR and
YPbPr signals.
Furthermore, the THS8133 can generate both a traditional bi-level sync or a tri-level sync signal, as per the
SMPTE standards, via a digital control interface. The sync signal is inserted on one of the analog output
channels (sync-on-green/luminance) or on all output channels. Also, a blanking control signal sets the outputs
to defined levels during the nonactive video window.
Finally the input format can be either 3脳10 bit 4:4:4, 2脳10 bit 4:2:2, or 1脳10 bit 4:2:2. This enables a direct
interface to a wide range of video DSP/ASICs including parts generating ITU-BT.656 formatted output data.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PowerPAD is a trademark of Texas Instruments.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
POST OFFICE BOX 655303
鈥?/div>
DALLAS, TEXAS 75265
RPr0
RPr1
RPr2
RPr3
RPr4
RPr5
RPr6
RPr7
RPr8
RPr9
BLANK
SYNC
Copyright
漏
2000, Texas Instruments Incorporated
1
next