UCC28510, UCC28511, UCC28512, UCC28513,
UCC28514, UCC28515, UCC28516, UCC28517
SLUS517B 鈭?DECEMBER 2002 鈭?REVISED AUGUST 2004
ADVANCED PFC/PWM
COMBINATION CONTROLLERS
FEATURES
D
Provides Control of PFC and PWM Power
D
D
D
D
Stages In One Device
Leading-Edge PFC, Trailing-Edge PWM
Modulation for Reduced Ripple
Built-In Sequencing of PFC and PWM
Turn-On
2-A Source and 3-A Sink Gate Drive for Both
PFC and PWM Stages
Typical 16-ns Rise Time and 7-ns Fall Time
into 1-nF Loads
DESCRIPTION
The UCC28510 series of combination PFC/PWM
controllers provide complete control functionality
for any off-line power system requiring
compliance with the IEC1000鈭?鈭? harmonic
reduction requirements. By combining the control
and drive signals for the PFC and the PWM stages
into a single device, significant performance and
cost benefits are gained. By managing the
modulation mechanisms of the two stages
(leading-edge modulation for PFC and
trailing-edge modulation for PWM), the ripple
current in the boost capacitor is minimized.
Based on the average current mode control
architecture with input voltage feedforward of prior
PFC/PWM combination controllers, these devices
offer performance advantages. Two new key
PWM features are programmable maximum duty
cycle and the 2x PWM frequency options to the
base PFC frequency. For the PFC stage, the
devices feature an improved multiplier and the
use of a transconductance amplifier for enhanced
transient response.
The core of the PFC section is in a three-input
multiplier that generates the reference signal for
the line current. The UCC28510 series features a
highly linearized multiplier circuit capable of
producing a low distortion reference for the line
current over the full range of line and load
conditions. A low-offset, high-bandwidth current
error amplifier ensures that the actual inductor
current (sensed through a resistor in the return
path) follows the multiplier output command
signal. The output voltage error is processed
through a transconductance voltage amplifier.
PFC Features
鈭?Average-Current-Mode Control for
Continuous Conduction Mode Operation
鈭?Highly-Linear Multiplier for Near-Unity
Power Factor
鈭?Input Voltage Feedforward Implementation
鈭?Improved Load Transient Response
鈭?Accurate Power Limiting
鈭?Zero Power Detect
PWM Features
鈭?/div>
鈭?/div>
鈭?/div>
鈭?/div>
鈭?/div>
Peak-Current-Mode Control Operation
1:1 or 1:2 PFC:PWM Frequency Options
Programmable maximum duty cycle
Programmable Soft-Start
Two Hysteresis Options for Differing
Hold-Up Time Requirements
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
Copyright
铮?/div>
2004, Texas Instruments Incorporated
www.ti.com
1
next
UCC28510 PDF文件相关型号
UCC28511,UCC28512,UCC28513,UCC28514,UCC28515,UCC28517
UCC28510相关型号PDF文件下载
-
型号
版本
描述
厂商
下载
-
英文版
Low Dropout 3 Ampere Linear Regulator Family
TI
-
英文版
Low Dropout 3 Ampere Linear Regulator Family
TI [Texas ...
-
英文版
Low Dropout 1 Ampere Linear Regulator Family
TI [Texas ...
-
英文版
Low Dropout 0.5A Negative Linear Regulator
TI [Texas ...
-
英文版
HID Lamp Controller
TI
-
英文版
HID Lamp Controller
TI [Texas ...
-
英文版
HIGH EFFICIENCY SECONDARY SIDE SYNCHRONOUS BUCK PWM CONTROLL...
TI
-
英文版
HIGH EFFICIENCY SECONDARY SIDE SYNCHRONOUS BUCK PWM CONTROLL...
TI [Texas ...
-
英文版
HIGH-EFFICIENCY SYNCHRONOUS BUCK PWM CONTROLLER
TI [Texas ...
-
英文版
Low Power Pulse Width Modulator
TI
-
英文版
Low Power Pulse Width Modulator
TI [Texas ...
-
英文版
Micropower Voltage Mode PWM
TI
-
英文版
Micropower Voltage Mode PWM
TI [Texas ...
-
英文版
Switch Mode Secondary Side Post Regulator
TI
-
英文版
Switch Mode Secondary Side Post Regulator
TI [Texas ...
-
英文版
Low Voltage Synchronous Buck Controller
TI
-
英文版
Low Voltage Synchronous Buck Controller
TI [Texas ...
-
英文版
Brushless DC Motor Controller
TI
-
英文版
Brushless DC Motor Controller
TI [Texas ...
-
英文版
Source Ringer Controller
TI