24AA01 Datasheet

  • 24AA01

  • 1K I2C™ Serial EEPROM

  • 791.40KB

  • 34页

  • Microchip    Microchip

扫码查看芯片数据手册

上传产品规格书

PDF预览

24AA01/24LC01B
4.0
4.1
WRITE OPERATION
Byte Write
4.2
Page Write
Following the Start condition from the master, the
device code (4 bits), the block address (3 bits, don鈥檛
cares) and the R/W bit, which is a logic low, is placed
onto the bus by the master transmitter. This indicates to
the addressed slave receiver that a byte with a word
address will follow after it has generated an Acknowl-
edge bit during the ninth clock cycle. Therefore, the
next byte transmitted by the master is the word address
and will be written into the address pointer of the
24XX01. After receiving another Acknowledge signal
from the 24XX01, the master device will transmit the
data word to be written into the addressed memory
location. The 24XX01 acknowledges again and the
master generates a Stop condition. This initiates the
internal write cycle, and, during this time, the 24XX01
will not generate Acknowledge signals (Figure 4-1).
The write control byte, word address and first data byte
are transmitted to the 24XX01 in the same way as in a
byte write. However, instead of generating a Stop
condition, the master transmits up to 8 data bytes to the
24XX01, which are temporarily stored in the on-chip
page buffer and will be written into the memory once
the master has transmitted a Stop condition. Upon
receipt of each word, the four lower-order address
pointer bits are internally incremented by 鈥?/div>
1
鈥? The
higher-order 7 bits of the word address remain
constant. If the master should transmit more than 8
words prior to generating the Stop condition, the
address counter will roll over and the previously
received data will be overwritten. As with the byte write
operation, once the Stop condition is received, an
internal write cycle will begin (Figure 4-2).
Note:
Page write operations are limited to writing
bytes within a single physical page
regardless
of the number of bytes
actually being written. Physical page
boundaries start at addresses that are
integer multiples of the page buffer size (or
鈥榩age size鈥? and end at addresses that are
integer multiples of [page size - 1]. If a
Page Write command attempts to write
across a physical page boundary, the
result is that the data wraps around to the
beginning of the current page (overwriting
data previously stored there), instead of
being written to the next page, as might be
expected. It is therefore necessary for the
application software to prevent page write
operations that would attempt to cross a
page boundary.
FIGURE 4-1:
BUS ACTIVITY
MASTER
S
T
A
R
T
S
BYTE WRITE
CONTROL
BYTE
WORD
ADDRESS
S
T
O
P
P
A
C
K
A
C
K
A
C
K
DATA
SDA LINE
BUS ACTIVITY
FIGURE 4-2:
BUS ACTIVITY
MASTER
SDA LINE
BUS ACTIVITY
PAGE WRITE
S
T
A
R
T
S
A
C
K
A
C
K
A
C
K
A
C
K
A
C
K
CONTROL
BYTE
WORD
ADDRESS (n)
S
T
O
P
P
DATA (n)
DATA (n + 1)
DATA (n + 7)
铮?/div>
2003 Microchip Technology Inc.
DS21711C-page 7

24AA01相关型号PDF文件下载

  • 型号
    版本
    描述
    厂商
    下载
  • 英文版
    128-Bit I2C™ Bus Serial EEPROM
    Microchip
  • 英文版
    128 Bit I 2 C? Bus Serial EEPROM
    MICROCHIP ...
  • 英文版
    1K I2C™ Serial EEPROM
    Microchip
  • 英文版
    1K I2C Serial EEPROM
    MICROCHIP ...
  • 英文版
    1K/2K 1.8V I 2 C O Serial EEPROMs
    MICROCHIP ...
  • 英文版
    2K I2C™ Serial EEPROM
    Microchip
  • 英文版
    2K I2C Serial EEPROM
    MICROCHIP ...
  • 英文版
    1K/2K 1.8V I 2 C O Serial EEPROMs
    MICROCHIP ...
  • 英文版
    4K I2C™ Serial EEPROM
    Microchip
  • 英文版
    4K/8K 1.8V I2C Serial EEPROMs
    MICROCHIP ...
  • 英文版
    8K I2C™ Serial EEPROM
    Microchip
  • 英文版
    MICROCHIP
  • 英文版
    4K/8K 1.8V I2C Serial EEPROMs
    MICROCHIP ...
  • 英文版
    8K IC SERIAL EEPROM
    MICROCHIP ...
  • 英文版
    16K I2C™ Serial EEPROM
    Microchip
  • 英文版
    16K 1.8V I2C SERIAL EEPROM
    MICROCHIP ...
  • 英文版
    16K 1.8V I 2 C O Serial EEPROM
    MICROCHIP ...
  • 英文版
    32K 1.8V I2C™ Smart Serial™ EEPROM
    Microchip
  • 英文版
    32K 1.8V I 2 C O Smart Serial EEPROM
    MICROCHIP ...
  • 英文版
    2K 2.2V I?C? Serial EEPROM with Software Write-Protect
    MICROCHIP

扫码下载APP,
一键连接广大的电子世界。

在线人工客服

买家服务:
卖家服务:

0571-85317607

客服在线时间周一至周五
9:00-17:30

关注官方微信号,
第一时间获取资讯。

建议反馈

联系人:

联系方式:

按住滑块,拖拽到最右边
>>
感谢您向阿库提出的宝贵意见,您的参与是维库提升服务的动力!意见一经采纳,将有感恩红包奉上哦!