RUBICON-LH
10GE & OC192/48/12/3 DW/FEC/PM and AsyncMap Device with Strong FEC
Part Number S19227PBI-2
Product Brief
Revision 1.0, March 2006
CONTROL INTERFACE
A general purpose 16-bit microprocessor interface is provided for
control and monitoring. The interface supports both Intel and
Motorola type microprocessors, and is capable of operating in
either interrupt driven or polled-mode configurations.
APPLICATION DIAGRAMS
Figure 2: OC192/STM64 to OTU-2 Edge Transponder
Figure 2 shows the Rubicon-LH in an edge transponder applica-
tion. The client-side interface is achieved through the connection
to a standard 300 Pin MSA SFI4P1 Transponder. On the network
side, the AMCC S19235 and S3394 are used to provide a high-
performance interface to the network side optics. This diagram is
also the diagram for a mid-span transponder for either a standard
FEC to standard FEC network or a standard FEC to enhanced
FEC network. In either of these mid-span transponder applica-
tions, the client rate would increase from the standard SONET
rate to the 7% overhead rate.
Figure 2: OC192/STM64 to OTU-2 Edge Transponder
S19235
300Pin
MSA
M odule
R ubicon
-
LH
S3394
10G E-LAN ,
O C 192/STM 64
1 x O TU2
10.7G H z
D ispersionXX-2 C hipset
4
Empowering Intelligent Optical Networks
1
2
3
4
5
