您的位置：维库电子市场网 > Datasheet > 97SD3232RPME

97SD3232RPME Datasheet

  • 97SD3232RPME

  • 1 Gb SDRAM 8-Meg X 32 Bit X 4-Banks

  • 745.01KB

  • 39页

  • MAXWELL

阅览下载 纠错 0

扫码查看芯片数据手册

上传产品规格书

PDF预览

1 Gb (8-Meg X 32-Bit X 4-Banks) SDRAM
97SD3232
Clock suspend mode entry:
The SDRAM enters clock suspend mode from active mode by setting CKE to
Low. If a command is input in the clock suspend mode entry cycle, the command is valid. The clock suspend
mode change depending on the current status (1 clock before) as described below.
ACTIVE clock suspend:
This suspend mode ignores inputs after the next clock by internally maintaining
the bank active status.
READ suspend and READ with Auto-precharge suspend:
The data being output is held ( and continues
to be output).
WRITE suspend and WRIT with Auto-precharge suspended:
In this mode, external signals are not
accepted. However, the internal state is held.
Clock suspend:
During clock suspend mode, keep the CKE to Low.
Clock suspend mode exit:
The SDRAM exits from clock suspend mode by setting CKE to High during the
clock suspend state.
IDLE:
In this state, all banks are not selected, and have completed precharge operation.
Auto-refresh command (REF):
When this command is input from the IDLE state, the SDRAM starts auto-
refresh operation. (The auto-refresh is the same as the CBR refresh of conventional DRAMs.) During the
auto-refresh operation, refresh address and bank select address are generated inside the SDRAM. For
every auto-refresh cycle, the internal address counter is updated. Accordingly, 8192 cycles are required to
refresh the entire memory contents. Before executing the auto-refresh command, all the banks must be in
the IDLE state. In addition, since the precharge for all banks is automatically performed after auto-refresh,
no precharge command is required after auto-refresh.
Self Refresh entry (SELF)
1
:
When this command is input during the IDLE state, the SDRAM starts self-
refresh operation. After the execution of this command, self-refresh continues while CKE is Low. Since self-
refresh is performed internally and automatically, external refresh operations are unnecessary.
Power down mode entry:
When this command is executed during the IDLE state, the SDRAM enters
power down mode. In power down mode, power consumption is suppresses by cutting off the initial input
circuit.
Self-refresh exit:
When this command is executed during self-refresh mode, the SDRAM can exit from self-
refresh mode. After exiting from self-refresh mode, the SDRAM enters the IDLE state.
Power down exit:
When this command is executed at power down mode, the SDRAM can exit from power
down mode. After exiting from power down mode, the SDRAM enters the IDLE state.
Memory
1. Self refresh mode should only be used at temperatures below 70掳C.
01.11.05 Rev 2
All data sheets are subject to change without notice
11
漏2005 Maxwell Technologies
All rights reserved.

97SD3232RPME相关型号PDF文件下载

您可能感兴趣的PDF文件资料

热门IC型号推荐

©2024 维库电子市场网（www.dzsc.com）　备案号：浙B2-20050339-1 经营许可证：浙B2-20210386版权声明
买家服务热线：0571-85317607 | 买家服务部QQ： QQ:1609526468
卖家服务热线：0571-85317607 | 卖家服务部QQ： QQ:331652727

扫码下载APP，
一键连接广大的电子世界。

在线人工客服

买家服务：
卖家服务：

0571-85317607

客服在线时间周一至周五
9:00-17:30

关注官方微信号，
第一时间获取资讯。

建议反馈
返回顶部

建议反馈

联系人：

联系方式：

按住滑块，拖拽到最右边
>>
感谢您向阿库提出的宝贵意见，您的参与是维库提升服务的动力！意见一经采纳，将有感恩红包奉上哦！

PDF纠错X

投诉电话：0571-85317607 投诉QQ：

如选匿名将无法为您反馈投诉结果，建议实名投诉！