您的位置：维库电子市场网 > Datasheet > SC16C654DBIB64

SC16C654DBIB64 Datasheet

  • SC16C654DBIB64

  • 5 V, 3.3 V and 2.5 V quad UART, 5 Mbit/s (max.), with 64-byt...

  • 292.47KB

  • 58页

  • PHILIPS

阅览下载 纠错 0

扫码查看芯片数据手册

上传产品规格书

PDF预览

Philips Semiconductors
SC16C654B/654DB
5 V, 3.3 V and 2.5 V quad UART, 5 Mbit/s (max.) with 64-byte FIFOs
鈥?/div>
smaller than 1.27 mm, the footprint longitudinal axis
must
be parallel to the
transport direction of the printed-circuit board.
The footprint must incorporate solder thieves at the downstream end.
鈥?/div>
For packages with leads on four sides, the footprint must be placed at a 45掳 angle to
the transport direction of the printed-circuit board. The footprint must incorporate
solder thieves downstream and at the side corners.
During placement and before soldering, the package must be 铿亁ed with a droplet of
adhesive. The adhesive can be applied by screen printing, pin transfer or syringe
dispensing. The package can be soldered after the adhesive is cured.
Typical dwell time of the leads in the wave ranges from 3 seconds to 4 seconds at 250
掳C
or 265
掳C,
depending on solder material applied, SnPb or Pb-free respectively.
A mildly-activated 铿倁x will eliminate the need for removal of corrosive residues in most
applications.
12.4 Manual soldering
Fix the component by 铿乺st soldering two diagonally-opposite end leads. Use a low voltage
(24 V or less) soldering iron applied to the 铿俛t part of the lead. Contact time must be
limited to 10 seconds at up to 300
掳C.
When using a dedicated tool, all other leads can be soldered in one operation within
2 seconds to 5 seconds between 270
掳C
and 320
掳C.
12.5 Package related soldering information
Table 29:
Package
[1]
BGA, HTSSON..T
[3]
, LBGA, LFBGA, SQFP,
SSOP..T
[3]
, TFBGA, VFBGA, XSON
DHVQFN, HBCC, HBGA, HLQFP, HSO, HSOP,
HSQFP, HSSON, HTQFP, HTSSOP, HVQFN,
HVSON, SMS
PLCC
[5]
, SO, SOJ
LQFP, QFP, TQFP
SSOP, TSSOP, VSO, VSSOP
CWQCCN..L
[8]
, PMFP
[9]
, WQCCN..L
[8]
[1]
[2]
Suitability of surface mount IC packages for wave and re铿俹w soldering methods
Soldering method
Wave
not suitable
not suitable
[4]
Re铿俹w
[2]
suitable
suitable
suitable
not recommended
[5] [6]
not recommended
[7]
not suitable
suitable
suitable
suitable
not suitable
For more detailed information on the BGA packages refer to the
(LF)BGA Application Note
(AN01026);
order a copy from your Philips Semiconductors sales of铿乧e.
All surface mount (SMD) packages are moisture sensitive. Depending upon the moisture content, the
maximum temperature (with respect to time) and body size of the package, there is a risk that internal or
external package cracks may occur due to vaporization of the moisture in them (the so called popcorn
effect). For details, refer to the Drypack information in the
Data Handbook IC26; Integrated Circuit
Packages; Section: Packing Methods.
These transparent plastic packages are extremely sensitive to re铿俹w soldering conditions and must on no
account be processed through more than one soldering cycle or subjected to infrared re铿俹w soldering with
peak temperature exceeding 217
掳C 卤
10
掳C
measured in the atmosphere of the re铿俹w oven. The package
body peak temperature must be kept as low as possible.
[3]
9397 750 14965
漏 Koninklijke Philips Electronics N.V. 2005. All rights reserved.
Product data sheet
Rev. 02 鈥?20 June 2005
54 of 58

SC16C654DBIB64 产品属性

  • NXP

  • UART 接口集成电路

  • 4

  • 5 Mbps

  • 5.5 V

  • 2.25 V

  • 6 mA

  • + 85 C

  • - 40 C

  • LQFP-64

  • Bulk

  • SMD/SMT

  • 2.5 V, 3.3 V, 5 V

  • 800

  • IrDA

  • SC16C654DBIB64,157

SC16C654DBIB64相关型号PDF文件下载

您可能感兴趣的PDF文件资料

热门IC型号推荐

©2024 维库电子市场网（www.dzsc.com）　备案号：浙B2-20050339-1 经营许可证：浙B2-20210386版权声明
买家服务热线：0571-85317607 | 买家服务部QQ： QQ:1609526468
卖家服务热线：0571-85317607 | 卖家服务部QQ： QQ:331652727

扫码下载APP，
一键连接广大的电子世界。

在线人工客服

买家服务：
卖家服务：

0571-85317607

客服在线时间周一至周五
9:00-17:30

关注官方微信号，
第一时间获取资讯。

建议反馈
返回顶部

建议反馈

联系人：

联系方式：

按住滑块，拖拽到最右边
>>
感谢您向阿库提出的宝贵意见，您的参与是维库提升服务的动力！意见一经采纳，将有感恩红包奉上哦！

PDF纠错X

投诉电话：0571-85317607 投诉QQ：

如选匿名将无法为您反馈投诉结果，建议实名投诉！