您的位置：维库电子市场网 > Datasheet > TPS2044A

TPS2044A Datasheet

  • TPS2044A

  • 0.7A，2.7-5.5V 四路（2 输入/4 输出）高侧 MOSFET，故障报告，...

  • 212.00KB

  • 32页

  • TI

阅览下载 纠错 0

扫码查看芯片数据手册

上传产品规格书

PDF预览

TPS2041A, TPS2042A, TPS2043A, TPS2044A
TPS2051A, TPS2052A, TPS2053A, TPS2054A
CURRENT-LIMITED POWER-DISTRIBUTION SWITCHES
SLVS247 鈥?SEPTEMBER 2000
APPLICATION INFORMATION
TPS2041A
Power Supply
2.7 V to 5.5 V
2,3
0.1
碌F
5
4
OC
EN
GND
1
IN
OUT
6,7,8
0.1
碌F
22
碌F
Load
Figure 24. Typical Application (Example, TPS2041A)
power-supply considerations
A 0.01-碌F to 0.1-碌F ceramic bypass capacitor between INx and GND, close to the device, is recommended.
Placing a high-value electrolytic capacitor on the output pin(s) is recommended when the output load is heavy.
This precaution reduces power-supply transients that may cause ringing on the input. Additionally, bypassing
the output with a 0.01-碌F to 0.1-碌F ceramic capacitor improves the immunity of the device to short-circuit
transients.
overcurrent
A sense FET is employed to check for overcurrent conditions. Unlike current-sense resistors, sense FETs do
not increase the series resistance of the current path. When an overcurrent condition is detected, the device
maintains a constant output current and reduces the output voltage accordingly. Complete shutdown occurs
only if the fault is present long enough to activate thermal limiting.
Three possible overload conditions can occur. In the first condition, the output has been shorted before the
device is enabled or before V
I(IN)
has been applied (see Figure 6). The TPS204xA and TPS205xA sense the
short and immediately switch into a constant-current output.
In the second condition, a short or an overload occurs while the device is enabled. At the instant the overload
occurs, very high currents may flow for a short time before the current-limit circuit can react. After the
current-limit circuit has tripped (reached the overcurrent trip threshhold) the device switches into
constant-current mode.
In the third condition, the load has been gradually increased beyond the recommended operating current. The
current is permitted to rise until the current-limit threshold is reached or until the thermal limit of the device is
exceeded (see Figure 7). The TPS204xA and TPS205xA are capable of delivering current up to the current-limit
threshold without damaging the device. Once the threshold has been reached, the device switches into its
constant-current mode.
OC response
The OC open-drain output is asserted (active low) when an overcurrent or overtemperature condition is
encountered. The output will remain asserted until the overcurrent or overtemperature condition is removed.
Connecting a heavy capacitive load to an enabled device can cause momentary false overcurrent reporting from
the inrush current flowing through the device, charging the downstream capacitor. The TPS204xA and
TPS205xA family of devices are designed to reduce false overcurrent reporting. An internal overcurrent
transient filter eliminates the need for external components to remove unwanted pulses. Using low-ESR
electrolytic capacitors on the output lowers the inrush current flow through the device during hot-plug events
by providing a low-impedance energy source, also reducing erroneous overcurrent reporting.
POST OFFICE BOX 655303
鈥?/div>
DALLAS, TEXAS 75265
19

TPS2044A PDF文件相关型号

TPS2044B,TPS2047B,TPS2071,TPS2110A

TPS2044A相关型号PDF文件下载

您可能感兴趣的PDF文件资料

热门IC型号推荐

©2024 维库电子市场网（www.dzsc.com）　备案号：浙B2-20050339-1 经营许可证：浙B2-20210386版权声明
买家服务热线：0571-85317607 | 买家服务部QQ： QQ:1609526468
卖家服务热线：0571-85317607 | 卖家服务部QQ： QQ:331652727

扫码下载APP，
一键连接广大的电子世界。

在线人工客服

买家服务：
卖家服务：

0571-85317607

客服在线时间周一至周五
9:00-17:30

关注官方微信号，
第一时间获取资讯。

建议反馈
返回顶部

建议反馈

联系人：

联系方式：

按住滑块，拖拽到最右边
>>
感谢您向阿库提出的宝贵意见，您的参与是维库提升服务的动力！意见一经采纳，将有感恩红包奉上哦！

PDF纠错X

投诉电话：0571-85317607 投诉QQ：

如选匿名将无法为您反馈投诉结果，建议实名投诉！