您的位置：维库电子市场网 > Datasheet > DS1802
DS1802数据手册封面

DS1802 Datasheet

  • DS1802

  • Dual Audio Taper Potentiometer with Pushbutton Control

  • 291.58KB

  • Dallas

阅览下载 纠错 0

扫码查看芯片数据手册

上传产品规格书

PDF预览

DS1802
time window. Subsequent changes when operating with continuous input pulse occur on 100 ms time
intervals and are dependent on zero-crossing or 50 ms timeouts.
MUTE CONTROL
The DS1802 provides a mute control feature which can be accessed by the user through hardware or
software. Hardware control of the device is achieved through the MUTE input pin. This pin is internally
pulled up through a 50 k鈩?resistor. When this input is driven low, the wiper outputs of both
potentiometers will be internally connected to the low terminal of their respective potentiometers. This
input performs as a toggle input, with the first activity on this pin connecting the wiper outputs to the low
end of the resistive array on each potentiometer. The next input activity on this pin will return the wiper
position to the previous state before the muting occurred. Also, if operating in pushbutton mode, mute
will be deactivated if an input is received over the VU, VD, UC0, UC1, DC0, DC1 inputs. This input, like
the pushbutton inputs, is internally debounced and requires no external circuitry. When the device
powers up, the first activity on the mute pin will internally connect the wipers to the low end of the
resistor array.
Software mute control was briefly discussed in 3-wire protocol and operation. Bits 6 and 14 of the 16-bit
I/O shift register are reserved for mute control of potentiometer-0 and potentiometer-1, respectively.
Unlike hardware mute control, software muting allows the user individual control of each potentiometer
(i.e., potentiometer-0 and potentiometer-1 can be independently muted). Software muting of
potentiometer-0 would require bit 6 to have a value of 1 while for potentiometer-1, bit 14 should have a
value 1. When the user desires to release the mute of any potentiometer through software the complete
16-bit I/O shift register must be rewritten with the desired potentiometer wiper settings and bits 6 and 14
having 0 value.
3-Wire Serial Port Vs. Pushbutton
Operation
In applications where both the 3-wire serial port and the pushbutton inputs will be used to control the
part, there may be times when activity is present on both control interfaces simultaneously. This section
describes how the DS1802 handles these situations.
In all instances, the DS1802 3-wire serial port takes precedence over pushbutton input control.
The DS1802 will not allow pushbutton inputs to change wiper position during 3-wire serial port activity.
11 of 17
101999

DS1802 产品属性

  • Lead (SnPb) Finish for COTSObsolescence Mitigation Program

  • 18

  • 集成电路 (IC)

  • 数据采集 - 数字电位器

  • -

  • 64

  • 45k

  • 2

  • 标准值 750 ppm/°C

  • 易失

  • 3 线串行，按钮

  • 2.7 V ~ 5.5 V

  • -40°C ~ 85°C

  • 通孔

  • 20-DIP（0.300"，7.62mm）

  • 20-PDIP

  • 管件

DS1802相关型号PDF文件下载

您可能感兴趣的PDF文件资料

热门IC型号推荐

©2024 维库电子市场网（www.dzsc.com）　备案号：浙B2-20050339-1 经营许可证：浙B2-20210386版权声明
买家服务热线：0571-85317607 | 买家服务部QQ： QQ:1609526468
卖家服务热线：0571-85317607 | 卖家服务部QQ： QQ:331652727

扫码下载APP，
一键连接广大的电子世界。

在线人工客服

买家服务：
卖家服务：

0571-85317607

客服在线时间周一至周五
9:00-17:30

关注官方微信号，
第一时间获取资讯。

建议反馈
返回顶部

建议反馈

联系人：

联系方式：

按住滑块，拖拽到最右边
>>
感谢您向阿库提出的宝贵意见，您的参与是维库提升服务的动力！意见一经采纳，将有感恩红包奉上哦！

PDF纠错X

投诉电话：0571-85317607 投诉QQ：

如选匿名将无法为您反馈投诉结果，建议实名投诉！