基于UCC28070的300W PFC高效电源方案设计
出处:stering 发布于:2012-08-14 10:25:36
本文介绍了UCC28070 主要特性,简化方框图和功能方框图,以及采用两个UCC28070的四相输出应用框图,300W交叉PFC预稳压器参考设计主要指标,控制器电路图和电源电路图。
UCC28070是先进的功率因素修正器件,集成了两个工作在180度反相的PWM。 这种PWM交叉工作能降低输入和输出纹波电流,使得导电EMI滤波变得更加容易,成本更低。可编程工作频率从30 kHz 到300 kHz,有极好的效率和多种保护功能,主要用在高效服务器和台式PC电源,通信整流器,白色家电和工业设备。
UCC28070 主要特性:
Interleaved Average Current-Mode PWM Control
with Inherent Current Matching
Advanced Current Synthesizer Current Sensing for
Superior Efficiency
Highly-Linear Multiplier Output with Internal Quantized
Voltage Feed-Forward Correction for Near-Unity PF
Programmable Frequency (30 kHz to 300 kHz)
Programmable Maximum Duty-Cycle Clamp
Programmable Frequency Dithering Rate and Magnitude
for Enhanced EMI Reduction
Magnitude: 3 kHz to 30 kHz
Rate: Up to 30 kHz
External Clock Synchronization Capability
Enhanced Load and Line Transient Response through Voltage
Amplifier Output Slew-Rate Correction
Programmable Peak Current Limiting
Bias-Supply UVLO, Over-Voltage Protection, Open-Loop Detection,
and PFC-Enable Monitoring
External PFC-Disable Interface
Open-Circuit Protection on VSENSE and VINAC pins
Programmable Soft Start
20-Lead TSSOP/SOIC Packages
UCC28070 应用:
High-Efficiency Server and Desktop Power Supplies
Telecom Rectifiers
White Goods and Industrial Equipment

图1。UCC28070简化方框图

图2。UCC28070功能方框图

图3。采用两个UCC28070的四相输出应用框图
UCC28070 300W交叉PFC预稳压器参考设计
UCC28070 300-W Interleaved PFC Pre-Regulator Design Review
In higher power applications to utilize the full line power and reduce line current harmonics PFC Pre-regulators are generally required. In these high power applications interleaving PFC stages can reduce inductor volume and reduce input and output capacitor ripple current. This results in smaller overall magnetic volume and filter capacitor volume increasing the converters overall power density. This is made possible through distributing the power over two interleaved boost converters and the inductor ripple current cancellation that occurs with interleaving, reference [5]. This application note will review the design of a 300W two-phase interleaved power factor corrected (PFC) pre-regulator. This power converter achieves PFC with the use of the UCC28070 interleaved PFC controller, reference。
参考设计指标:


图4。典型平均电流模式交叉PFC预稳压器电路图

图5。300W原型子板控制器电路图

图6。300W原型主板电源电路图
参考文献:
[1]. UCC28070 datasheet https://www.dzsc.com/datasheet/UCC28070+_1137169.html.
[2]. PFC datasheet https://www.dzsc.com/datasheet/PFC_1200255.html.
上一篇:电源负载响应的改善方案
下一篇:动力及环境监控系统的设计
版权与免责声明
凡本网注明“出处:维库电子市场网”的所有作品,版权均属于维库电子市场网,转载请必须注明维库电子市场网,https://www.dzsc.com,违反者本网将追究相关法律责任。
本网转载并注明自其它出处的作品,目的在于传递更多信息,并不代表本网赞同其观点或证实其内容的真实性,不承担此类作品侵权行为的直接责任及连带责任。其他媒体、网站或个人从本网转载时,必须保留本网注明的作品出处,并自负版权等法律责任。
如涉及作品内容、版权等问题,请在作品发表之日起一周内与本网联系,否则视为放弃相关权利。
- 电源设计秘籍:降低待机功耗的7种有效方法2026/2/5 15:35:19
- 电源管理IC的工作原理与应用2026/1/30 11:42:05
- 48V直流电源系统在数据中心的应用优势2026/1/29 10:36:07
- 模拟电源IC与数字电源IC的区别2026/1/19 11:22:39
- 双向DC-DC变换器在储能系统中的核心作用2026/1/12 11:48:07









