No.
Ball No.
input or output pins.
At reset, these pins default to Timer functionality.
the GPIOE_PUR register.
TD0 - 3鈥?/div>
Timer D, Channels 0, 1, 2 and 3
(GPIOE10)
TD1
(GPIOE11)
TD2
(GPIOE12)
TD3
(GPIOE13)
IRQA
IRQB
130
A10
Input
Port E GPIO
鈥?These GPIO pins can be individually programmed as
input or output pins.
At reset, these pins default to Timer functionality.
131
D10
To deactivate the internal pull-up resistor, clear the appropriate bit of
the GPIOE_PUR register. See
Part 6.5.6
for details.
132
E10
65
66
K9
P9
Schmitt
Input
Input
External Interrupt Request A and B
鈥?The IRQA and IRQB inputs
are asynchronous external interrupt requests during Stop and Wait
mode operation. During other operating modes, they are synchronized
external interrupt requests, which indicate an external device is
requesting service. They can be programmed to be level-sensitive or
negative-edge triggered.
To deactivate the internal pull-up resistor, set the IRQ bit in the
SIM_PUDR register. See
Part 6.5.6
for details.
56F8367 Technical Data, Rev. 3.0
36
Freescale Semiconductor
Preliminary