MAX705CPA 低成本微处理器监控电路

出处：hw213 发布于：2007-04-18 18:04:30

概述

The MAX705-MAX708/MAX813L microprocessor (µP) supervisory circuits reduce the complexity and number of components required to monitor power-supply and battery functions in µP systems. These devices significantly improve system reliability and accuracy compared to separate ICs or discrete components.

The MAX705/MAX706/MAX813L provide four functions:

1) A reset output during power-up, power-down, and brownout conditions.
2) An independent watchdog output that goes low if the watchdog input has not been toggled within 1.6 seconds.
3) A 1.25V threshold detector for power-fail warning, low-battery detection, or for monitoring a power supply other than +5V.
4) An active-low manual-reset input.

The MAX707/MAX708 are the same as the MAX705/ MAX706, except an active-high reset is substituted for the watchdog timer. The MAX813L is the same as the MAX705, except RESET is provided instead of RESET-bar.

Two supply-voltage monitor levels are available: The MAX705/MAX707/MAX813L generate a reset pulse when the supply voltage drops below 4.65V, while the MAX706/MAX708 generate a reset pulse below 4.40V. All four parts are available in 8-pin DIP, SO and µMAX® packages.

关键特性

应用

µMAX Package: Smallest 8-Pin SO
Guaranteed RESET-bar Valid at V_CC = 1V
Precision Supply-Voltage Monitor

4.65V in MAX705/MAX707/MAX813L

4.40V in MAX706/MAX708
200ms Reset Pulse Width
Debounced TTL/CMOS-Compatible Manual-Reset Input
Independent Watchdog Timer-1.6sec Timeout (MAX705/MAX706)
Active-High Reset Output (MAX707/MAX708/MAX813L)
Voltage Monitor for Power-Fail or Low-Battery Warning

主要参数,

	汽车电子
	计算机－台式机、工作站、服务器
	控制器
	的µP监视器
	智能仪表

Key Specifications: Microprocessor Supervisors

Part Number

Number of Monitored Voltages

Reset Threshold Range (V)

Active-Low Reset Output

Active-High Reset Output

Min. Reset Timeout Range

Watchdog Feature

Nom. Watchdog Timeout Range

Supervisor Features

Reset Thresh. Acc. (% at +25°C)

Max. I_CC (µA)

Package

Package Type

Operating Temp. Range (°C)

MAX705

1 2

3.3 to 5.5

Push-Pull

85ms to 300ms

Input (WDI)
Input/Output (WDI/WDO)

1s to 2s

Adjustable Reset Input Manual Reset Power Fail Comparator/Low Line

2.5

350.0

8/PDIP
8/SOIC
8/uMAX

µMAX Plastic DIP SOIC

-40 to +125 -40 to +85 -55 to +125 0 to +70

MAX706

Push-Pull

Input (WDI)
Input/Output (WDI/WDO)

1s to 2s

2.5

8/PDIP
8/SOIC
8/uMAX

MAX707

Push-Pull

No Watchdog

2.5

8/PDIP
8/SOIC
8/uMAX

MAX708

Push-Pull

No Watchdog

2.5

8/PDIP
8/SOIC
8/uMAX

MAX813

Push-Pull

Input/Output (WDI/WDO)

1s to 2s

1.5

See Data Sheet

应用笔记

	App Note 655: Supervisor ICs Monitor Battery-Powered Equipment - MAX706 (English only)
	应用笔记2632：利用uP复位电路控制Vcc电源 - MAX706

注释

	Watchdog timer (MAX705,706,813)
	Power-fail comparator (MAX705-8, 813)

链接至更多信息

没有找到你需要的产品吗？

	样品与定购信息(版本号、型号)： MAX705 MAX706 MAX707 MAX708 MAX813L
	完整的数据资料：(PDF, 240kB：英文 )
	可靠性: MAX705xxA.pdf MAX708xxA.pdf MAX813LxxA.pdf (English only)
	申请可靠性： (English only)

参数搜索 (English only)

应用帮助

没有找到你需要的产品吗？ (English only)

相关产品

MAX6316, MAX6316M, MAX6317, MAX6318, MAX6319, MAX6320, MAX6321, MAX6322 5引脚、微处理器监控电路，带有看门狗及手动复位 - 概述
MAX6351, MAX6352, MAX6353, MAX6354, MAX6355, MAX6356, MAX6357, MAX6358, MAX6359, MAX6360 双/三电压微处理器监控电路 - 概述

图表

Typical Operating Circuit 典型电路

关键词：MAX705CPA 低成本微处理器监控电路MAX705CPAMAX705MAX813LMAX708MAX706 MAX707MAX813MAX6316MAX6320MAX6357MAX6358MAX6359MAX6360MAX6351MAX6352MAX6353MAX6354MAX6355MAX6356MAX6321MAX6322MAX6317MAX6318MAX6319MAX6316M

上一篇：基于低成本CMOS摄像头智能监控系统的设计

下一篇：视频监控系统中多画面处理器的设计