您的位置：维库电子市场网 > Datasheet > DS1621
DS1621数据手册封面

DS1621 Datasheet

  • DS1621

  • Digital Thermometer and Thermostat

  • 647.51KB

  • Dallas

纠错 0

扫码查看芯片数据手册

上传产品规格书

PDF预览

DS1621
COMMAND SET
Data and control information is read from and written to the DS1621 in the format shown in Figure 5. To
write to the DS1621, the master will issue the slave address of the DS1621 and the R/
W
bit will be set to
鈥?鈥? After receiving an acknowledge, the bus master provides a command protocol. After receiving this
protocol, the DS1621 will issue an acknowledge and then the master may send data to the DS1621. If the
DS1621 is to be read, the master must send the command protocol as before and then issue a repeated
START condition and the control byte again, this time with the R/
W
bit set to 鈥?鈥?to allow reading of the
data from the DS1621. The command set for the DS1621 as shown in Table 3 is as follows:
Read Temperature [AAh]
This command reads the last temperature conversion result. The DS1621 will send 2 bytes, in the format
described earlier, which are the contents of this register.
Access TH [A1h]
If R/
W
is 鈥?鈥?this command writes to the TH (HIGH TEMPERATURE) register. After issuing this
command, the next 2 bytes written to the DS1621, in the same format as described for reading
temperature, will set the high temperature threshold for operation of the T
OUT
output. If R/
W
is 鈥?鈥?the
value stored in this register is read back.
Access TL [A2h]
If R/
W
is 鈥?鈥?this command writes to the TL (LOW TEMPERATURE) register. After issuing this
command, the next 2 bytes written to the DS1621, in the same format as described for reading
temperature, will set the high temperature threshold for operation of the T
OUT
output. If R/
W
is 鈥?鈥?the
value stored in this register is read back.
Access Config [ACh]
If R/
W
is 鈥?鈥?this command writes to the configuration register. After issuing this command, the next
data byte is the value to be written into the configuration register. If R/
W
is 鈥?鈥?the next data byte read is
the value stored in the configuration register.
Read Counter [A8h]
This command reads the value of the counter byte. This command is valid only if R/
W
is 鈥?鈥?
Read Slope [A9h]
This command reads the value of the slope counter byte from the DS1621. This command is valid only if
R/
W
is 鈥?鈥?
Start Convert T [EEh]
This command begins a temperature conversion. No further data is required. In one鈥搒hot mode the
temperature conversion will be performed and then the DS1621 will remain idle. In continuous mode this
command will initiate continuous conversions.
Stop Convert T [22h]
This command stops temperature conversion. No further data is required. This command may be used to
halt a DS1621 in continuous conversion mode. After issuing this command, the current temperature
10 of 16
102299

DS1621 产品属性

  • Lead (SnPb) Finish for COTSObsolescence Mitigation Program

  • 50

  • 集成电路 (IC)

  • PMIC - 热管理

  • -

  • 温度计，恒温计

  • 内部

  • -55°C ~ 125°C

  • ±2°C（最小值）

  • ADC（三角积分型），比较器，寄存器库

  • I²C?/SMBus?

  • 是

  • 无

  • 2.7 V ~ 5.5 V

  • -55°C ~ 125°C

  • 通孔

  • 8-DIP（0.300"，7.62mm）

  • 8-DIP

  • 管件

DS1621相关型号PDF文件下载

您可能感兴趣的PDF文件资料

热门IC型号推荐

©2024 维库电子市场网（www.dzsc.com）　备案号：浙B2-20050339-1 经营许可证：浙B2-20210386版权声明
买家服务热线：0571-85317607 | 买家服务部QQ： QQ:1609526468
卖家服务热线：0571-85317607 | 卖家服务部QQ： QQ:331652727

扫码下载APP，
一键连接广大的电子世界。

在线人工客服

买家服务：
卖家服务：

0571-85317607

客服在线时间周一至周五
9:00-17:30

关注官方微信号，
第一时间获取资讯。

建议反馈
返回顶部

建议反馈

联系人：

联系方式：

按住滑块，拖拽到最右边
>>
感谢您向阿库提出的宝贵意见，您的参与是维库提升服务的动力！意见一经采纳，将有感恩红包奉上哦！

PDF纠错X

投诉电话：0571-85317607 投诉QQ：

如选匿名将无法为您反馈投诉结果，建议实名投诉！