PIC16C745/765
10.6
Buffer Descriptor Table (BDT)
To efficiently manage USB endpoint communications
the USB implements a Buffer Descriptor Table (BDT)
in register space. Every endpoint requires a 4 byte
Buffer Descriptor (BD) entry. Because the buffers are
shared between the MCU and the USB, a simple
semaphore mechanism is used to distinguish which is
allowed to update the BD and buffers in system mem-
ory. The UOWN bit is cleared when the BD entry is
鈥渙wned鈥?by the MCU. When the UOWN bit is set to 1,
the BD entry and the buffer in system memory is
owned by the USB. The MCU should not modify the
BD or its corresponding data buffer.
The Buffer Descriptors provide endpoint buffer control
information for the USB and MCU. The Buffer Descrip-
tors have different meaning based on the value of the
UOWN bit.
The USB Controller uses the data stored in the BDs
when UOWN = 1 to determine:
鈥?/div>
鈥?/div>
鈥?/div>
鈥?/div>
Data0 or Data1 PID
Data toggle synchronization enable
Number of bytes to be transmitted or received
Starting location of the buffer
The MCU uses the data stored in the BDs when
UOWN = 0 to determine:
鈥?/div>
鈥?/div>
鈥?/div>
Data0 or Data1 PID
The received TOKEN PID
Number of bytes transmitted or received
Each endpoint has a 4 byte Buffer Descriptor and
points to a data buffer in the USB dual port register
space. Control of the BD and buffer would typically be
handled in the following fashion:
鈥?/div>
The MCU verifies UOWN = 0, sets the BDndAL to
point to the start of a buffer, if necessary fills the
buffer, then sets the BDndST byte to the desired
value with UOWN = 1.
When the host commands an in or out transac-
tion, the Serial Interface Engine (SIE) performs
the following:
- Get the buffer address
- Read or write the buffer
- Update the USTAT register
- Update the buffer descriptors with the packet
ID (PID) value
- Set the data 0/1 bit
- Update the byte count
- Clear the UOWN bit
The MCU is interrupted and reads the USTAT,
translates that value to a BD, where the UOWN,
PID, Data 0/1, and byte count values are checked.
鈥?/div>
鈥?/div>
DS41124A-page 68
Advanced Information
漏
1999 Microchip Technology Inc.
prev
next
PIC16C745 PDF文件相关型号
PIC16C765
PIC16C745相关型号PDF文件下载
-
型号
版本
描述
厂商
下载
-
英文版
8-Pin FLASH-Based 8-Bit CMOS Microcontrollers
-
英文版
8-Pin, 8-Bit CMOS Microcontroller with EEPROM Data Memory
MICROCHIP ...
-
英文版
8-Pin, 8-Bit CMOS Microcontroller with A/D Converter and EEP...
MICROCHIP ...
-
英文版
8-Pin, 8-Bit CMOS Microcontrollers
MICROCHIP ...
-
英文版
EPROM Memory Programming Specification
MICROCHIP ...
-
英文版
8-Pin FLASH-Based 8-Bit CMOS Microcontrollers
MICROCHIP ...
-
英文版
Microcontroller
-
英文版
Microcontroller
-
英文版
Microcontroller
ETC
-
英文版
EPROM-Based 8-Bit CMOS Microcontroller
-
英文版
8-Pin, 8-Bit CMOS Microcontrollers
-
英文版
8-Pin, 8-Bit CMOS Microcontrollers
MICROCHIP ...
-
英文版
ETC
-
英文版
EPROM Memory Programming Specification
-
英文版
EPROM Memory Programming Specification
MICROCHIP ...
-
英文版
28-Pin Programmable Mixed Signal Controller
-
英文版
EPROM Memory Programming Specification
-
英文版
Microcontroller
ETC
-
英文版
Microcontroller
ETC
-
英文版
EPROM/ROM-Based 8-Bit CMOS Microcontroller Series